https://arxiv.org/api/sz52N3Gs8h9Ryh5ncAqIwFRYu9I 2026-06-11T03:35:12Z 45276 360 15 http://arxiv.org/abs/2605.12152v1 2026-05-12T14:07:08Z

Three-dimensional X-ray microtomography, coupled to rheometric measurements, enables a morphology-resolved reconstruction of capillary stresses at the grain scale in unsaturated wet granular materials. Liquid domains are automatically classified into capillary bridges, dimers, trimers, and larger clusters, and their spatial organization is tracked as a function of shear deformation and liquid content. We show that shear localization governs the redistribution of the liquid phase: capillary bridges remain uniformly distributed throughout the sample, while higher-order morphologies accumulate preferentially near the lower boundary of the shear-zone through a shear-driven coalescence mechanism. Despite this spatial localization, simple two-grain bridges generate the dominant contribution to the isotropic capillary pressure, accounting for nearly 85\% of the total at liquid-to-solid volume ratio $ε= 0.05$, whereas more complex liquid clusters contribute only weakly to the overall cohesion. Incorporating the morphology-resolved capillary pressure into an effective-stress framework qualitatively reproduces the macroscopic friction coefficient across the full range of investigated liquid contents, without adjustable parameters. These results establish a predictive micro--macro link between liquid morphology and the rheology of wet granular materials.

2026-05-12T14:07:08Z 12 pages, 14 figures Physical Review E 113, 055408 (2026) Ahmad Awdi Camille Chateau Coumba Niang Patrick Aimedieu Jean-Noël Roux Abdoulaye Fall 10.1103/jp22-sptz http://arxiv.org/abs/2605.12127v1 2026-05-12T13:50:15Z

A glass is conventionally obtained by cooling a bulk supercooled liquid through its glass transition temperature. The discovery of ultrastable glasses prepared using physical vapor deposition, together with the recent multiplication of numerical algorithms created to increase the stability of glasses, demonstrates the existence of a variety of strategies for designing glasses with different physical properties. This raises a broader question: which parameters most strongly govern the enhancement of glass stability? Existing computational strategies often produce highly stable glasses by optimizing certain physical properties through dynamical changes in particle diameters. We challenge the idea that these physical quantities are causally responsible for glass stability and suggest instead that diameter dynamics is the principal source of enhanced stability. To support our view, we introduce computational methods to optimize physical quantities without changing the particle diameters. Using the examples of enhanced hyperuniformity at large scale and local ordering at small scale, we design glass configurations with highly optimized values compared to bulk equilibrium states. However, these glasses do not show enhanced stability. The proposed physical quantities are correlated with glass stability, but are not causally responsible for ultrastability. These findings indicate that design rules for stable glasses should be reinterpreted in terms of the dynamical processes that generate stability, rather than the optimized physical quantities they target.

2026-05-12T13:50:15Z 11 pages, 7 figures Leonardo Galliano Ludovic Berthier http://arxiv.org/abs/2605.12125v1 2026-05-12T13:44:49Z

Poroelastic materials, consisting of a permeable solid matrix infiltrated with fluid, are ubiquitous in natural and engineering contexts. In poroelastic polymer solids, the elastic matrix swells to equilibrium when immersed in a solvent bath; thus, the network elasticity couples to the solvent transport. Despite the ubiquity and importance of poroelastic theory in describing phenomena as diverse as earthquakes and biological tissues, there is a paucity of experimental data that probe the local network response to controlled stress and solvent boundary conditions. Here, we first probe the baseline diffusion kinetics of a polymeric solvent during free swelling of a polydimethylsiloxane (PDMS) network with well-characterized silicone oils. In situ 3D spatiotemporal measurements identify a flux-limited interfacial boundary condition, contradicting the canonical fully drained assumption. This correction eliminates an order-of-magnitude underestimation of diffusivity in standard bulk analysis. The swelling equilibrium is accurately captured by a Flory-Rehner theory that requires modification to include the effective finite extensibility of the filled network. Solvent migration is then studied using a bending configuration for three material preparations: as-prepared, mobile-phase-free, and fully swollen in silicone oils. The as-prepared and mobile-phase-free beams show no discernible volumetric change or force relaxation, whereas local in situ measurements directly resolve tensile-side dilation and compressive-side contraction, yielding the effective diffusivities in agreement with the force-relaxation data. These measurements rigorously benchmark solvent diffusivity in polymer networks, underscoring the importance of unambiguous interfacial boundary conditions and shedding light on mechanics and engineering across poroelastic polymers and geomaterials.

2026-05-12T13:44:49Z Chenzhuo Li Tom Beyeler Marc Antonio Chalhoub John M. Kolinski http://arxiv.org/abs/2605.12109v1 2026-05-12T13:23:35Z

Developing tissues often maintain mechanical coherence while continuously remodeling through cellular processes such as cell divisions and rearrangements. In this way, they are an example of amorphous solids. In passive amorphous solids, local rearrangements can trigger one another through long-ranged elastic interactions, leading to system-spanning avalanches near yielding. Whether similar collective dynamics should be expected in living tissues is unclear, because cell divisions generate stress and remodeling events independently of local mechanical stability. Here, we address this question using a two-dimensional elastoplastic model in which cell divisions are treated as active plastic events. We find that while cell divisions fluidize the tissue below the passive yield stress, but preserve the marginal stability in the quasistatic limit. However, they also strongly suppress the system-spanning avalanches of cell rearrangements, in constrast with the expected behavior in passive amorphous solids. Finally, we show that the avalanche supression originates from the energy balance in the system. Namely, the energy injected by cell divisions allows for shear flow below the yield stress, but also provides a finite budget for rearrangements. These results suggest that proliferating tissues display the structural hallmarks of marginal amorphous solids while exhibiting much shorter-ranged correlations in dynamics, compared to passive amorphous solids.

2026-05-12T13:23:35Z Ali Tahaei Ahandeep Manna Marko Popović http://arxiv.org/abs/2605.12108v1 2026-05-12T13:22:40Z

The liquid crystalline 4-pentylphenyl-4'-decyloxythiobenzoate is investigated in various temperature programs for determination of crystallization kinetics and glassforming properties. The Avrami model, Augis-Bennett method and isoconversional method are used. Cooling at the 25-30 K/min rate results in formation of the glass of the tilted smectic Y phase with the herring-bone order within layers. Slower cooling leads to the partial or total (2 K/min) crystallization of the metastable Cr2 phase, which during subsequent heating or annealing in a proper temperature transforms to another Cr1 phase. Heating from the vitrified smectic Y leads to cold crystallization of the pure Cr1 phase or the Cr1/Cr2 mix. Both Cr1 and Cr2 are conformationally disordered crystal phases, which is indicated both by the melting entropy values and the dielectric spectra. The results demonstrate that the energy released during cold crystallization can be tuned by thermal history, highlighting 10OS5 as a candidate for thermal energy storage applications.

2026-05-12T13:22:40Z Aleksandra Deptuch Mirosława D. Ossowska-Chruściel Janusz Chruściel Ewa Juszyńska-Gałązka http://arxiv.org/abs/2603.21919v2 2026-05-12T13:10:24Z

Actin flow in the cortical cytoskeleton underneath the cell membrane generates mechanical stresses that shape the cell surface. We study this mechanism using a hydrodynamic model of a compressible active gel polymerizing at the membrane and undergoing turnover. We determine how actin flow, density relaxation and friction of actin with the membrane generate stress on a corrugated membrane at the linear order in deformation. Analytical solutions in limiting regimes, combined with finite element methods in the general case, provide a map of normal and tangential stresses as functions of compressibility, interfacial friction and actin turnover, and determine the conditions under which actin polymerization can render the membrane linearly unstable. The non-linear regime is also briefly discussed.

2026-03-23T12:41:34Z 12 pages, 9 figures Kristiana Mihali Dennis Wörthmüller Pierre Sens http://arxiv.org/abs/2604.00777v2 2026-05-12T12:15:02Z

When coupling thermal baths at different temperatures, negative differential thermal conductivity is typically attributed to nonlinear interactions in the connecting medium. In this work, we demonstrate that such an effect can arise purely from the nature of the thermal baths and their coupling with the medium. Specifically, we construct a bath composed of overdamped thermal particles, which is coupled to one end of a harmonic chain, while the other end is connected to a standard Langevin heat bath. By analyzing the steady-state heat current, we observe significant negative differential thermal conductivity. In particular, as the temperature difference between the two baths diverges, the steady-state heat current through the chain vanishes. The effect is thermokinetic: we compute the effective dissipative coefficient and we find that it scales inversely with the square of the temperature of the particle bath in the high-temperature limit, resulting in an asymptotic decoupling between the bath and the chain. Our results highlight that nonequilibrium transport properties can be strongly influenced by the structure of the environment and its coupling to the system, even in otherwise linear systems.

2026-04-01T11:39:27Z 10 pages, 4 figures Transport Phenomena, 1(2), 20260042 (2026) Simon Krekels Christian Maes Ion Santra Ruoxun Zhai 10.1515/tp-2026-0042 http://arxiv.org/abs/2605.11892v1 2026-05-12T10:07:23Z

Non-reciprocal systems have been shown to sustain time-dependent patterns, most prominently travelling waves. The transition into these time-dependent states generally breaks time-translational invariance, representing a clear deviation from equilibrium dynamics. Though common implementations of non-reciprocity lead to such phenomenology, these spatio-temporal patterns are absent in other models. In the same vein, the ensuing scaling behaviour also depends on the precise way non-reciprocity is implemented. To better understand the effects of different non-reciprocal interactions, we study the critical conserved dynamics of non-reciprocally coupled spin systems. Specifically, we consider the dynamics of two $n$-component order parameter fields $\boldsymbolφ_i$ with $i \in\{1,2\}$. Unlike the common implementations of non-reciprocal interactions, we introduce the non-reciprocity solely through the non-linear interaction between the distinct species. Using the field-theoretic renormalisation group (RG) procedure, we perform a one-loop analysis and show that at one-loop level, the critical behaviour depends on the microscopic value of certain quantities. Using the flow functions, we elucidate the behaviour of the fixed points for different bare microscopic values. We also show that for $n \geq 4$, there is a fixed point where the ensuing critical dynamics asymptotically obey detailed-balance, implying the emergent dynamics are agnostic to the microscopic non-reciprocity on large scales. Finally, we show that the conserved dynamics reduces the number of independent scaling exponents, mimicking the effect of a standard fluctuation-dissipation relation.

2026-05-12T10:07:23Z Emir Sezik Gunnar Pruessner http://arxiv.org/abs/2605.11719v1 2026-05-12T08:06:04Z

The spacial heterogeneity of hydrogels composed of PEGDA and added polymer chains is expected to play a crucial role on their transport properties which can be exploited in filtration or tissue engineering. However little is known about the arrangement of the polymer chains in the matrix and the length scales of these heterogeneities. Here we combine solid-state NMR and Small Angle Neutron Scattering to unravel the structure and dynamics of PEGDA hydrogels containing added PEG chains of various concentrations. Our results show that the samples present heterogeneities in both the PEGDA and PEG concentrations and suggest that the PEG chains entangle with the PEGDA network. When plotting the sample permeability, K, as a function the specific surface of the PEGDA heterogeneities we obtain a master curve, showing that the heterogeneity of the PEGDA matrix controls the permeability of the sample. Moreover the scaling K ___ V/S suggests a structure composed of facetted PEGDA/PEG heterogeneities separated by a network of aqueous thin and flattened films in which the water can permeate.

2026-05-12T08:06:04Z Sixtine de Chateauneuf-Randon LOMA Malak Alaa Eddine LOMA Bruno Bresson LOMA Thomas Salez LOMA Sylvain Prévost SIMM S. Belbekhouche SIMM Théo Merland SIMM Cédric Lorthioir LCMCP-SMiLES Clémence Le Coeur C. Monteux http://arxiv.org/abs/2605.11708v1 2026-05-12T08:01:26Z

A paradigm for the study of wrinkling in elastic sheet is the Lamé configuration, in which azimuthal wrinkles form in an annular sheet subjected to tensile loads at both edges. Since wrinkles are spatially extended, this instability provides a mechanism for stress transmission over long distances. A natural extension of this problem is wrinkling in sheets with multiple holes or broken symmetry. Here, we investigate tension-induced wrinkling in thin elastic sheets containing two circular holes by combining analytical modeling and experiments. The pre-buckled state is solved analytically using bipolar coordinates, enabling identification of the wrinkling threshold as a function of the distance between the two holes. Near-threshold wrinkling and interactions between wrinkles are analyzed, and we validate our theoretical predictions against experimental observations obtained through video imaging of spin-coated polystyrene sheets floating on liquid surfaces with controlled surface tension. Our results demonstrate that geometric symmetry breaking, such as the presence of a second hole, strongly influences wrinkle nucleation, orientation, and spatial extent. Beyond mechanics, these findings might provide a simple mechanism for cellular mechanosensing, where force transmission is amplified by mechanical instabilities.

2026-05-12T08:01:26Z 28 pages, 12 figures Yang Liu Sepideh Razavi Pietro Cicuta Dominic Vella Alain Goriely http://arxiv.org/abs/2605.11660v1 2026-05-12T07:20:23Z

The rheology of phase-separated condensates plays a central role in applications spanning advanced materials design and cellular processes, yet quantitative characterization of their viscoelasticity remains challenging due to the limitations of existing microrheological methods that require tracer particles or mechanical contact. Here, we establish tracer-free and contactless acoustic microrheometry as a versatile platform for quantifying the frequency-dependent complex shear modulus of single microscale condensates over 0.01-10 Hz. Using spatiotemporally controlled acoustic radiation force generated within a micro-acoustic resonator, this method deforms condensates for creep-recovery and oscillatory viscoelastic measurements. Quantitative validation using dextran condensates in a polyethylene-glycol continuous phase successfully captures their size- and frequency-dependent mechanical responses, while application to nucleic-acid condensates reveals salt-dependent internal viscoelastic changes at single-condensate resolution. By enabling quantitative dissection of condensate mechanics without invasive probes, acoustic microrheometry provides a broadly applicable framework for investigating phase-separated condensates across materials science, soft matter physics, biology, and beyond.

2026-05-12T07:20:23Z 15 pages, 5 figures, 1 supplementary PDF file, and 6 supplementary movies Kichitaro Nakajima Taichi Yoshikawa Yuta Suzuki Shuta Nakatani Kanta Adachi Nobutomo Nakamura Sanae Murayama Hiroki Sakuta Naoya Yangisawa Nadia A. Erkamp Tomas Sneideris Mao Fukuyama Masateru Taniguchi Miho Yanagisawa Hirotsugu Ogi Tuomas P. J. Knowles http://arxiv.org/abs/2603.23907v2 2026-05-12T07:13:39Z

Accurate measurement of dynamic contact angles in aqueous environments is essential for evaluating surface wettability. However, conventional captive bubble methods often suffer from limitations such as bubble instability and interference from needle wetting. In this study, we develop a pushing-pulling captive bubble method that enables stable and precise measurement of dynamic contact angles underwater without directly changing the bubble volume. In this method, a bubble is pushed against and detached from a surface by controlled vertical motion. This procedure allows stable observation of the contact line while suppressing bubble deformation and lateral movement. Dynamic contact angles were measured in both air and water using three types of surfaces: smooth surfaces, sandpaper-polished surfaces prepared to exhibit the Wenzel state in air and the reversed gas-liquid Wenzel state in water, and microstructured surfaces exhibiting hydrophobicity in air. For smooth and Wenzel surfaces, the dynamic contact angles measured in air and water showed similar values. Moreover, the modified captive bubble method exhibited reproducibility comparable to or higher than that of conventional captive bubble methods. For microstructured surfaces, dynamic contact angle measurements in water had previously been difficult because an air layer remained trapped on the surface. In this study, ultrasonic degassing enabled dynamic contact angle measurements under fully wetted conditions, revealing behavior that differed significantly from that observed in air.

2026-03-25T03:56:44Z Submitted to an international academic journal Koki Iwasaki Hiroyuki Ebata Hiroaki Katsuragi http://arxiv.org/abs/2505.01058v5 2026-05-12T04:57:03Z

We introduce a machine-learning framework termed coarse-grained all-atom force field (CGAA-FF), which incorporates coarse-grained message passing within an all-atom force field using equivariant nature of graph models. The CGAA-FF model employs grain embedding to encode atomistic coordinates into nodes representing grains rather than individual atoms, enabling predictions of both grain-level energies and atom-level forces. Tested on EC/EMC organic electrolytes and RDX crystalline and disordered phases, CGAA-FF achieves 0.201 and 0.253 eV A-1, respectively, while providing about 10-fold and 5-fold higher computational speed and memory efficiency, respectively, than conventional MLIPs. Since this CGAA framework can be integrated into any equivariant architecture, we believe this work opens the door to efficient all-atom simulations of soft-matter systems.

2025-05-02T07:07:25Z Sungwoo Kang Jinwoong Chae http://arxiv.org/abs/2605.11481v1 2026-05-12T03:55:48Z

Double network (DN) materials exhibit anomalous strength and toughness that far exceed the sum of their constituents. While widely exploited, the fundamental physical mechanisms underlying this synergy remain elusive. Here, we show that a minimal three-dimensional model of two coupled, disordered linear-elastic networks is sufficient to capture the essential physics of DN nonlinear mechanics. The model reproduces the full suite of unique mechanical behaviors, including yielding, necking, strain hardening, and the brittle-to-ductile transition. Mechanical contrast between the hard and soft networks drives inter-network load transfer, which screens defects and suppresses stress concentrations in the hard network. By defining a stress-concentration factor, K_sc, we find that the hard-network failure strain scales universally as 1/K_sc, directly bridging microscopic defect screening to macroscopic yielding. We further show that complete defect screening triggers the shift from localized necking to delocalized damage. Furthermore, the stable necking plateau is identified as an energetic selection governed by the balance between potential energy release and irreversible dissipation. These findings reveal that a simple linear-elastic framework can account for the rich nonlinear landscape of DN materials, providing a general principle for designing next-generation tough solids.

2026-05-12T03:55:48Z 28 pages, 4 figures in the main text; 9 figures in the Supplemental Material Fucheng Tian Feixue Lu Katsuhiko Sato Liangbin Li Bin Li Jian Ping Gong http://arxiv.org/abs/2605.11455v1 2026-05-12T03:13:02Z

Liquid crystal elastomers (LCEs) are elastomeric networks with rod-like mesogens that reorient under load. In polydomain LCEs, this reorientation drives a polydomain-to-monodomain transition that produces a soft-elastic plateau. Coupling between this soft elasticity and polymer-network viscoelasticity yields a path-dependent thermoviscoelastic response, central to applications in damping, impact protection, and tough adhesives. However, the physics governing this response under complex thermomechanical histories remains insufficiently studied. We present a combined experimental and theoretical study of polydomain LCEs under three uniaxial protocols: single-cycle loading-unloading, stress-free recovery from various pre-stretches, and multi-cycle loading with progressively increasing amplitude. We develop a finite-deformation constitutive model combining two parallel mechanisms: rate-independent, temperature-dependent soft elasticity from mesogen reorientation, and time- and temperature-dependent viscoelasticity. With a single parameter set, the model quantitatively reproduces all three protocols and resolves each mechanism's contribution. A temperature-dependent soft-elastic limit governs the low-rate response and the long-time recovered stretch, while viscoelasticity controls the rate-dependent deviation and the cycle-wise accumulation of residual stretch away from this limit. A thermal recovery test above the nematic-isotropic transition confirms that all hysteresis and residual deformation are reversible, ruling out irreversible damage. The framework provides mechanistic understanding and a predictive basis for designing polydomain LCE components under complex thermomechanical histories.

2026-05-12T03:13:02Z submitted manuscript Zhengxuan Wei Beijun Shen Zumrat Usmanova Umme Hani Bootwala Ruobing Bai