https://arxiv.org/api/Ydlf96gwQM76xuxdzoJuWZKCw5E 2026-06-11T02:38:07Z 45276 345 15 http://arxiv.org/abs/2604.21762v2 2026-05-13T15:16:11Z

A polar tracer immersed in an active bath is known to be propelled forward and therefore activated. Here we report that the induced dynamics of an inertial tracer can be much richer than expected. We investigate a heavy polar tracer immersed in a bath of independent active Brownian particles. Using the projection-operator formalism to integrate out the bath, we show that the tracer's reduced dynamics can be precisely mapped onto a stochastic Lorenz equation. According to the attractors in the Lorenz equation, the tracer motion is classified into several different dynamical regimes, including active Brownian motion, chiral active Brownian motion, complex chaotic motion, and zigzag active Brownian motion. For certain regimes, we derive analytical expressions for the propulsion speed, the velocity covariance, and the effective diffusion coefficient. Numerical simulations corroborate these theoretical predictions.

2026-04-23T15:10:53Z Jing-Bo Zeng Ji-Hui Pei http://arxiv.org/abs/2410.09158v3 2026-05-13T14:32:56Z

Soft solids and their surface deformations control the response of many natural and artificial systems. Yet, their underlying properties are vigorously debated, particularly for polymer networks. While molecular-scale theories predict no interfacial changes with macroscopic deformation, multiple experiments suggest otherwise. To settle this issue, we measure displacement fields near the interface of a silicone gel, in the limit of small deformations. We discover an unexpected multiscale response. The shear modulus decreases smoothly by half with 20 microns of the interface. At the same time we observe a surface excess elasticity, that depends on history and outer medium composition. These results reveal the fundamentally multiscale nature of polymeric surfaces, and call for further experimental and theoretical investigations into the basic understanding of soft solid interfaces

2024-10-11T18:04:19Z 17 pages, 20 figures Nicolas Bain Lawrence A. Wilen Dominic Gerber Mengjie Zu Carl P. Goodrich Senthilkumar Duraivel Kaarthik Varma Harsha Koganti Robert W. Style Eric R. Dufresne http://arxiv.org/abs/2504.12038v3 2026-05-13T13:48:25Z

We examined the Brownian motion of point defects in a two-dimensional hexagonal colloidal crystal, going beyond the conventional treatment that assumes constant diffusion coefficients. By extracting the spatially varying drift vector and diffusion matrix directly from experimental trajectories, we uncovered richer behavior than predicted by the simple diffusive limit. Within a general stochastic-dynamics framework, these measurements revealed an effective stochastic potential landscape shaped by the crystal's periodic structure. The energy differences between its local minima were consistent, to within an order of magnitude, with previous experimental estimates. Simulations of stochastic trajectories on this reconstructed landscape reproduced the essential features of the observed defect motion. This study illustrates how combining time-series extraction with theoretical analysis can expose effective energy landscapes and provide a powerful route to understanding complex dynamics in colloidal systems.

2025-04-16T12:53:51Z Huang Xicheng Liu Zefei Chen Yong-Cong Yang Guohong Ao Ping 10.1103/7ftx-4plk http://arxiv.org/abs/2601.15834v2 2026-05-13T12:28:26Z

We study a quasi-one-dimensional fluid of hard dumbbells with continuous orientational degrees of freedom using an exact transfer-matrix formulation. The model allows for a complete analytical characterization of thermodynamic properties, orientational ordering, and correlation functions in terms of the spectral properties of an integral operator. We derive exact expressions for the equation of state, the orientational distribution function, and both partial and total radial distribution functions. Their asymptotic behavior is governed by the complex poles of the Laplace-transformed correlation functions, which determine the positional and orientational correlation lengths. As density increases, the system exhibits a continuous crossover from a weakly ordered regime with a unimodal orientational distribution to a strongly constrained regime characterized by bimodal orientational ordering. This crossover is accompanied by a nonmonotonic behavior of the pressure relative to the Tonks gas and by a qualitative change in the decay of correlation functions from oscillatory to monotonic. In the high-pressure limit, we show that orientational and positional fluctuations contribute equally to the pressure, leading to a universal ratio of twice the Tonks pressure. The theoretical predictions are supported by numerical solutions of the discretized transfer operator and by scaling arguments that elucidate the high-pressure behavior of ordering and correlation lengths.

2026-01-22T10:39:20Z 16 pages, 11 figures Phys. Rev. E 113, 055404 (2026) Ana M. Montero Péter Gurin Szabolcs Varga Andrés Santos 10.1103/sdt7-t224 http://arxiv.org/abs/2605.13196v1 2026-05-13T08:50:31Z

Direct numerical simulation of microscale fluid--structure interactions in multicomponent and multiphase flows requires methods that can represent moving boundaries together with fields constrained to evolving interfaces. Diffuse-domain methods (DDMs) address this geometric difficulty by replacing sharp surfaces with diffuse volumetric representations on regular computational domains. Here we formulate DDMs using Onsager's variational principle. Instead of extending sharp-interface equations and boundary conditions term by term, we embed sharp-surface free-energy and dissipation functionals into the bulk through a diffuse surface delta density and derive the governing equations from the Rayleighian. The framework distinguishes balance-law fields, internal nonconserved order parameters, and kinematic or constitutive rate variables. It also clarifies a key moving-surface distinction: conserved surface densities are transported by the full material surface velocity, whereas explicitly tangential vector and tensor internal variables require projected objective or co-rotational rates within their admissible tangential state spaces. For scalar transport on rigid and deformable interfaces, and for interfacial hydrodynamics near rigid walls, the formulation recovers established DDM models and their sharp-interface limits. The same variational construction yields coupled diffuse-domain models for multicomponent deformable vesicles with surface viscosity, tangential slip, and finite areal compressibility, and for active shells carrying chemical and tangential vector order. These results provide a unified route to thermodynamically consistent passive DDMs for interfacial and surface dynamics, while allowing active stresses through active work power. The framework is relevant to soft matter, microfluidic interfaces, biological membranes, and morphogenetic surface dynamics.

2026-05-13T08:50:31Z 37 pages, 3 figures Xinpeng Xu http://arxiv.org/abs/2408.07937v3 2026-05-13T07:15:19Z

Viscosity, the resistance of a liquid to flow, is driven by atomic-scale friction but its microscopic origin remains poorly understood. We use a theoretical framework based on nonaffine linear response to decompose the viscosity of metallic and model liquids into contributions from individual instantaneous normal modes (INMs). Our approach reveals excellent agreement with simulations and exposes the specific excitations that govern viscous dynamics. Above the mode-coupling temperature ($T_{\text{MC}}$), viscosity is controlled by unstable localized INMs (ULINMs), which act as precursors for diffusive momentum transport. Below $T_{\text{MC}}$, we find a dynamical crossover where stable modes govern viscosity, a behavior consistent with a transition in the potential energy landscape from saddle-dominated to minima-dominated dynamics. We also propose a quantitative model connecting viscosity with ULINMs in both Arrhenius and non-Arrhenius regimes. This work provides a spectral decomposition of liquid viscosity, identifying the atomic modes responsible for it and opening a path to predict it from elementary excitations.

2024-08-15T05:12:27Z extensive revision; matching the final published version Long-Zhou Huang Bingyu Cui Min-Qiang Jiang Matteo Baggioli Yun-Jiang Wang http://arxiv.org/abs/2605.12889v1 2026-05-13T02:08:52Z

Many soft matter systems exhibit ordered, polycontinuous network morphologies, such as the cubic (double) gyroid or diamond, as well as disordered network morphologies known generically as ``random sponges". While presumed to share similar local packing geometry, the structural relationship between these ordered and disordered network morphologies has remained obscure. We use slice and view scanning electron microscopy to analyze and compare multi-scale morphological features of an ordered double-gyroid morphology to the amorphous sponge morphology formed in the same block copolymer sample. We find that node valence of the minority component network of the sponge is mostly gyroidal (trivalent), with a small fraction of diamond-like (tetravalent) connections. We analyze mesoatoms -- space-filling volumes occupied by chains around each network node -- finding significant differences in shape and size between ordered and amorphous regions. Local block thickness and inter-domain curvature within mesoatomic units of the disordered sponge exhibits a surprisingly similar degree of dispersity to the ordered double-gyroid. The mean differences in local packing geometry derive from topological distinction: loops of the minority networks of the ordered double-gyroid are intercatenated, while loops of the disordered sponge are not. In this way, the sponge may be viewed as disordered variant of a single-gyroidal morphology. We exploit these topological differences to demarcate the boundary region between ordered and disordered networks and highlight modulations of the mesoatom motifs at the boundary. These observations point to new questions about potential metastability of disordered networks and their possible role as kinetic precursors to long-range ordered network morphologies.

2026-05-13T02:08:52Z 22 pages, 5 figures, 4 supporting videos, 1 supplemental appendix (10 pages) Xueyang Feng Suman S. Kulkarni Michael S. Dimitriyev Dani S. Bassett Randall D. Kamien Edwin L. Thomas Gregory M. Grason http://arxiv.org/abs/2605.12860v1 2026-05-13T01:09:41Z

Electrokinetically-driven Janus colloids, e.g., with one metallic and one dielectric hemisphere, confined between parallel walls exhibit a boundary-accumulation mechanism enabled by an effective cross-channel diffusivity which is distinct from wall accumulation of active Brownian or run-andtumble particles. Using density-matched suspensions and three-dimensional confocal imaging, we directly measure the full time-dependent redistribution of particles across the channel under an applied AC electric field. The wall population grows exponentially while the bulk depletes, and data obtained over multiple field strengths collapse onto a single curve when rescaled by the measured relaxation rate, revealing one dominant, confinement-controlled timescale. Propulsion follows the expected induced-charge electrophoretic scaling, with a mean orientation angle lying between 2 degrees and 10 degrees above horizontal, leading to a top-biased accumulation. Comparison with an overdamped Ornstein-Uhlenbeck turning model suggests that persistent stochastic turning about a small out-ofplane angle results in a cross-channel effective drift and diffusion. The drift governs the dominant timescale and the diffusion is strong enough to provide significant accumulation on the bottom wall despite a mean upward orientational bias.

2026-05-13T01:09:41Z Sandeep Ramteke Alicia Boymelgreen Jarrod Schiffbauer http://arxiv.org/abs/2605.12747v1 2026-05-12T20:49:39Z

Colloidal models with short-range attraction and long range repulsion (SALR) have been extensively studied using theoretical and simulations methods due to their rich and universal equilibrium phase behavior. Using Brownian Dynamics simulations, we study the dynamical phase behavior of active suspensions in which colloidal particles interact with each other via a SALR potential. Upon increasing the self-propulsion force of the particles, we observed that the structural transitions the active suspension undergoes resemble those observed in its passive counterpart by increasing the temperature of the thermal bath. However, when looking at the transport properties of active and passive suspensions with similar structure, we observed a clear mismatch. We demonstrated that increasing the activity enhances the particles mobility within the SALR fluid when simultaneously preserves the structure. This leads to a structure-dynamics decoupling induced by the activity whereas at the same time highlights the structural memory of SALR potentials under non-equilibrium conditions.

2026-05-12T20:49:39Z Horacio Serna José Martín-Roca Ariel G. Meyra Eva G. Noya http://arxiv.org/abs/2605.12489v1 2026-05-12T17:59:04Z

Polarizable particle systems, including charged colloids, polarizable ions, biomolecular assemblies, and soft nanomaterials, can exhibit contact electrostatic interactions that depart strongly from Coulomb behavior when dielectric mismatch and geometric singularities amplify polarization effects. Here we use charged dielectric spheres as a model system and show that these polarization contributions can be canceled by jointly tuning size, charge, and dielectric asymmetries. By extending a recently developed image-charge formula to contacting dielectric spheres, we derive analytical conditions under which the contact interaction reduces to the bare Coulomb form. Accurate two-sphere calculations validate the resulting contact design rules with relative errors below $3\%$. Strikingly, many-body molecular dynamics simulations reveal that systems satisfying these two-body rules self-assemble into structures that closely match their pure Coulomb references. These results establish asymmetry as a route for turning electrostatic complexity into Coulombic simplicity at contact, with implications for controlled self-assembly and materials design.

2026-05-12T17:59:04Z 25 pages, 7 figures Yanyu Duan Zecheng Gan http://arxiv.org/abs/2605.12402v1 2026-05-12T17:01:05Z

Tissue-scale shape changes are driven by ensembles of intracellular forces. However measuring force in these contexts remains a difficult challenge. Here we perform spectral analysis of transverse fluctuations of cell-cell junctions in \emph{Xenopus} embryonic tissue explants undergoing convergent extension. We developed an image analysis pipeline to extract fluctuation amplitude profiles $u(x,t)$ from time-lapse confocal movies and computed two-dimensional spatiotemporal power spectra. We observe power-law scaling of mean-squared fluctuation power spectra consistent with $\langle u_q^2 \rangle \sim q^{-2}$ and $\langle u_f^2 \rangle \sim f^{-2}$. The spatial scaling agrees with predictions from the Helfrich Hamiltonian, and the temporal scaling agrees with overdamped dynamics of a fluctuating membrane, both in the tension-dominated regime. Pharmacological reduction of actomyosin contractility (via low-dose blebbistatin or latrunculin B) did not significantly alter either scaling exponent. Our results provide an early empirical characterization of junction fluctuation spectra in an actively shape-changing tissue. Simple tension-dominated membrane models appear sufficient to describe transverse junction dynamics despite their active and coupled nature. This work establishes a quantitative baseline for future studies of tension-bearing tissues and motivates the development of physical models specific to multicellular systems.

2026-05-12T17:01:05Z 17 pages, 5 figures Brian Huynh Shinuo Weng José Alvarado http://arxiv.org/abs/2605.12393v1 2026-05-12T16:56:53Z

We show how dynamical equations for liquid films and drops on uneven surfaces, including contact line dynamics and evaporation/condensation effects, may be formulated as a variational dynamics, generated via Onsager's variational principle. The theory applies in the isothermal overdamped-dynamics limit. We apply this general approach to obtain several well-known results on contact line dynamics and to study drops pinning and sliding on inclined corrugated surfaces. This approach constructs the dynamical equations starting from the free energy of the system and therefore has the advantage that it naturally incorporates the correct equilibrium properties.

2026-05-12T16:56:53Z 41 pages, 5 figures Gyula I Tóth David N Sibley Agnes J Bokányi-Tóth Dmitri Tseluiko Andrew J Archer http://arxiv.org/abs/2605.12333v1 2026-05-12T16:15:30Z

The freely jointed chain is often applied to model the thermodynamics of single polymer chains, but the traditional formulation of the model lacks internal energy changes due to bond stretching. For this reason, the extensible freely jointed chain model includes a potential energy function, typically harmonic, that governs the length of each link in the chain. Among the other quantities of interest that are subject to thermal fluctuations, these link lengths and energies too fluctuate about their ensemble average values. Since a plethora of models for polymer chains and networks incorporate chain dissociation as a function of either link length or energy, these fluctuations are crucial to understand and quantify. Motivated by this fact, fluctuations in link length and energy are analyzed within a freely jointed chain under an applied force. These fluctuations are quantified through their average values, standard deviations, and probability distributions. Across all values, asymptotically correct analytic relations and their less ergonomic exact counterparts are introduced. The asymptotic relations are verified to be accurate through direct comparison and to be correct within transcendentally small terms through error analysis. In certain cases, the fluctuations are shown to be approximately normally distributed. Hereafter, model components predicated on link length or energy ought to account for these fluctuations.

2026-05-12T16:15:30Z Michael R. Buche http://arxiv.org/abs/2507.16179v2 2026-05-12T15:43:28Z

Phase separation in biomolecular mixtures can result from multiple physical interactions, which may act either complementarily or antagonistically. In the case of protein-nucleic acid mixtures, charge plays a key role but can have contrasting effects on phase behavior. Attractive electrostatic interactions between oppositely charged macromolecules are screened by added salt, reducing the driving force for coacervation. By contrast, base pairing interactions between nucleic acids are diminished by charge repulsion and thus enhanced by added salt, promoting associative phase separation. To explore this interplay, we combine experiment and theory to map the complex phase behavior of a model solution of poly-L-lysine (PLL) and self-complementary DNA nanostars (NS) as a function of temperature, ionic strength, and macromolecular composition. Despite having opposite salt dependences, we find that electrostatics and base pairing cooperate to stabilize NS-PLL coacervation at high ionic strengths and temperatures, leading to two- or three-phase coexistence under various conditions. We further observe a variety of kinetic pathways to phase separation at different salt concentrations, resulting in the formation of nonequilibrium aggregates or droplets whose compositions evolve on long timescales. Finally, we show that the cooperativity between electrostatics and base pairing can be used to create immiscible coacervates that partition various NS species at intermediate salt concentrations. Our results illustrate how the interplay between distinct interaction modes can greatly increase the complexity of the phase behavior relative to systems with a single type of interaction.

2025-07-22T02:50:16Z Include supplementary information J. Am. Chem. Soc. 2025, 147, 46, 42452-42461 Gabrielle R. Abraham Tianhao Li Anna Nguyen William M. Jacobs Omar A. Saleh 10.1021/jacs.5c12436 http://arxiv.org/abs/2510.07599v2 2026-05-12T14:31:19Z

Magnetic remote actuation of soft materials is attractive for applications such as transforming materials and medical robots. However, due to manufacturing limitations, microscale magnetoactive devices are scarce -- light-based additive manufacturing methods, despite achieving microscale resolution, struggle with particle-induced light scattering. Moreover, large hard-magnetic microparticles restrict ultimate feature sizes, and deformation of soft-magnetic nanoparticle composites requires impractically high loading and field gradients. Among successfully fabricated microscale soft-magnetic composites, limited control over particle loading, distribution, and matrix-phase stiffness has hindered their functionality. Here, we combine two-photon polymerization with iron oxide nanoparticle coprecipitation to fabricate 3D-printed microscale nanocomposites with spatially tunable nanoparticle distribution. We control nanoparticle content by locally modulating the two-photon dose, imbuing parts with varied magnetic functionality and achieving millimeter-scale elastic deformations, demonstrated by a soft robotic gripper and a bistable bit register and sensor. Our approach enables precise control of mechanical and magnetic properties towards microscale metamaterial and robotics applications.

2025-10-08T22:40:41Z 7 figures, 15 supplementary figures Rachel M. Sun Andrew Y. Chen Yiming Ji Eric M. Stewart Daryl W. Yee Carlos M. Portela 10.1016/j.matt.2026.102809