https://arxiv.org/api/YinbFixng1K7cqxyQ7ibpPMMVMY 2026-06-10T23:30:14Z 45264 300 15 http://arxiv.org/abs/2605.17627v1 2026-05-17T19:48:32Z

We study an agent-based model of self-propelled particles with a velocity-dependent alignment rule. This interaction is orientation weighted and acts along the line connecting neighboring particles. Tuning the alignment strength produces several distinct collective regimes, including disordered gas-like motion, coherent flocking, jammed high-density states, and densely ordered moving clusters with active-crystal-like behavior. These results show that a simple local alignment rule can generate a broad range of nonequilibrium collective dynamics within a single microscopic model.

2026-05-17T19:48:32Z 8 pages, 5 figures Bohdan Dobosh Alexander Yakimenko http://arxiv.org/abs/2605.17581v1 2026-05-17T18:19:20Z

Flow in porous media is difficult to address using standard analytical or numerical methods due to its complexity. However, since synthetic representations of porous media are easy to produce and data from physical experiments are becoming more widely available, the problem is well-suited to studies that include machine learning (ML) techniques. We discuss a number of features that can be extracted from such data, and their utility as input variables into a standard ML algorithm. These features include structural measures describing the geometry of the porous media, topological measures describing the connectivity, and network measures obtained by modeling the porous media as simplified pore networks. These features enable the prediction of the permeability of the considered (synthetic) porous materials using ML techniques that also leverage the separately computed exact permeability (ground truth). Comparing results obtained using different input variables helps develop a better understanding of the utility of various measures for predicting permeability based on the porous media structure. We show, in particular, that topological data analysis (TDA) provides a useful set of features that can be easily combined with ML to yield meaningful results.

2026-05-17T18:19:20Z Ebru Dagdelen Catherin Neena Lalu Aakash Karlekar Manav Arora Matthew Illingworth Jonathan Jaquette Linda Cummings Lou Kondic http://arxiv.org/abs/2605.17579v1 2026-05-17T18:11:18Z

The theory of thermal fluctuations in crystalline membranes is put under scrutiny. In particular, the two critical regimes of the renormalisation group diagram, which are often left out of the discussion because of their instability in one direction, are examined in details. After studying the proper Goldstone mode counting around each of them, the properties of the fluctuations dominating the large scale spectrum are analysed. This shows that the fixed point P2 is a good candidate to describe the melting of a crystalline membrane. The properties of the melted membrane are then compared to the known properties of fluid membranes. As a byproduct of this analysis, we show that the generation of a fluid membrane by melting a bidimensional crystal allows to formulate its correlation functions without being plagued by the ghosts that inevitably show up in the usual Canham-Helfrich action relying on the Monge parametrisation.

2026-05-17T18:11:18Z 7 pages, 1 Figure Olivier Coquand http://arxiv.org/abs/2605.17523v1 2026-05-17T16:15:13Z

An analysis of the IR absorbance for the segmented functional groups of liquid crystal dimers: mesogen and linker, enabled the orientation order to be determined and information about the dipole interactions in the nematic and twist-bend nematic phases to be obtained. The long axis orientational order increases as the temperature decreases in the nematic phase, although much more slowly than for the classical nematics, and then reverses this trend in the twist-bend nematic phase due to the tilt of the molecules. In the nematic phase, the short axis of the molecule performs an isotropic uniform rotation and has a uniaxial alignment. In the twist-bend nematic phase, however, biaxial ordering occurs and grows significantly in accordance with the helical deformation of the director. Changes in the mean absorbance in the twist-bend nematic phase were observed: a decrease for the longitudinal dipole at the nematic-twist-bend nematic phase transition, thus emphasizing the antiparallel axial interaction of the dipoles, while the absorbance of the transverse dipoles remains unchanged up to 340 K, and then the latter become parallelly correlated.

2026-05-17T16:15:13Z Author's accepted manuscript. Published in Phys. Rev. E 105, 044701 (2022). 34 pages, 10 figures. Work supported by the National Science Centre, Poland (Grant No. 2018/31/B/ST3/03609 and Project No. 2020/39/O/ST5/03460) Phys. Rev. E 105, 044701 (2022) Antoni Kocot Barbara Loska Yuki Arakawa Katarzyna Merkel 10.1103/PhysRevE.105.044701 http://arxiv.org/abs/2605.17485v1 2026-05-17T14:53:14Z

Concentrated forces acting at the tip of a two-dimensional wedge give rise to the classical Flamant solution to linear elasticity, whose displacement and strain are singular at the tip of the wedge. Starting from nonlinear elasticity, we prove that the Flamant solution gives the leading order response of a slightly truncated wedge to small boundary displacements or loads. This asymptotic result holds for general hyperelastic energies with super-quadratic growth at infinity; it also holds in the borderline case of quadratic growth at infinity, so long as the tip of the wedge is subjected to small enough displacements or loads. A main point of the proof is to restore compactness to low-energy sequences. We do so by applying a logarithmic change of variables sufficiently far from the tip. To justify this change of variables, we prove a geometric rigidity inequality in $L^p$ for truncated wedge domains with a constant that is uniform in the truncation length. This follows from the bi-Lipschitz invariance of the constant in the $L^p$ Friesecke--James--Müller inequality. Using this change of variables, we derive an asymptotic variational principle characterizing the Flamant solution in the singular limit of an ideal wedge.

2026-05-17T14:53:14Z Dominik Engl Paul Plucinsky Ian Tobasco http://arxiv.org/abs/2605.17346v1 2026-05-17T09:37:11Z

We examine the thermal fluctuations of the polarization $p$, the charge density $ρ$, and the electric field $E$ in dilute electrolytes inserted between pararell metallic electrodes, where we fix the applied potential difference $Φ_a$ between the two electrodes. If the film thickness $H$ is shorter than the Debye screening length $κ^{-1}$, the space correlation of the polarization $p_z$ and the electric field $E_z$ along the surface normal (in the $z$ direction) acuire global components inversely proportional to the film volume $V$, which vary slowly along the $z$ axis and are homogeneous in the $xy$ plane. The areal charge density on each electrode surface also has a component homogeneous on the surface, which produces the global electric fluctuations. On the other hand, if $H$ much exceeds $κ^{-1}$, the global correlations of $p_z$ and $ρ$ become small in the bulk region outside the electric double layers, but that of $E_z$ remains almost unchanged by ions in the whole cell at fixed $Φ_a$. The dielectric constant $ε_{\rm eff}$ depends on $H$ and $κ$ and is expressed in terms of the fluctuation variances of $p_z$ and $ρ$ and that of the noblocal surface charge density at fixed $Φ_a$.

2026-05-17T09:37:11Z 11 pages, 7 figures Akira Onuki http://arxiv.org/abs/2603.23881v2 2026-05-16T15:26:45Z

The mechanics of single-chain stretching and rupture are central to understanding the resilience of biological polymers and designing strong and tough soft materials such as double-network gels and multi-network elastomers. In this work, we develop a statistical mechanics based model that enables one to determine the distribution of forces along the chain segments. By combining the force distribution with a tilted bond potential that captures the stretch energy stored in these bonds, we calculate the corresponding activation energy required for bond dissociation. This allows us to determine the probability of bond (and consequently chain) failure. The proposed approach is simple, direct, and readily adaptable for constructing higher-level coarse-grained descriptions of damage and fracture in polymer networks. We demonstrate this by applying the theory to two problems of practical interest: (1) toughening networks via sacrificial bond rupture in polymer chains and (2) incorporation of the local chain model into a 3-dimensional constitutive relation that captures damage in elastomers. The latter was implemented through the micro-sphere framework, which accounts for different chain orientations, as well as the computationally inexpensive eight chain model. The findings from this work provide a physically-based model to quantify the stretching and failure of a single chain and pave the way to the integration of local damage models into 3-dimensional networks.

2026-03-25T03:13:55Z Noy Cohen Nikolaos Bouklas Chung-Yuen Hui http://arxiv.org/abs/2605.14064v2 2026-05-16T13:08:02Z

The equilibrium behavior of binary mixtures can be understood through the competition of energy scales, which classifies their corresponding phase diagrams into distinct topological regimes (Types I-IV). However, in many soft-matter mixtures, strong competing interactions and kinetic barriers often promote dynamical arrest, disrupting the formation of equilibrium and metastable states, and thus rendering conventional phase diagrams incomplete. Here we extend the description and classification of binary systems inside regions of thermodynamical instability. Specifically, we discuss how the interplay between two kind of instabilities and kinetic arrest generates a variety of amorphous states driven by different underlying mechanisms. For strong cross-attraction, for example, dynamical arrest suppresses demixing, whereas in competitive regimes, a mixture may display either condensation-driven or demixing-induced arrested states. The crossover between these regimes can be described by a structural order parameter $χ$, providing a unified non-equilibrium description that reconciles theoretical predictions with experimentally observed arrested states.

2026-05-13T19:38:39Z Main file 7 pages, and 3 figures; Supplemental Material 19 pages, and 9 figures Ricardo Peredo-Ortiz Edilio Lázaro-Lázaro Magdaleno Medina-Noyola Luis Fernando Elizondo-Aguilera http://arxiv.org/abs/2605.16723v1 2026-05-16T00:13:03Z

Modeling the dynamics of colloidal rods remains a central challenge in soft-matter physics due to the anisotropic and long-ranged nature of their interactions. Hydrodynamic interactions in rods suspensions are often assumed to be screened or too week to play any role in semi-dilute regimes, yet we find here these assumptions to break down at shear rates and concentrations that are often attained in experiments. Using particle-based simulations and scaling analysis, we uncover a cascade of tumbling events driven by hydrodynamic coupling among neighboring rods. This collective dynamics disrupts flow alignment and leads to a pronounced increase in viscosity and normal stress differences, in qualitative agreement with recent experiments. The discovery of this hydrodynamically-promoted cascade effect calls for a revision of existing constitutive models for colloidal rods and highlights hydrodynamic coupling as a key mechanism governing collective dynamics in highly anisotropic suspensions.

2026-05-16T00:13:03Z Lucas H. P. Cunha Paul F. Salipante Peter D. Olmsted Steven D. Hudson http://arxiv.org/abs/2511.00690v2 2026-05-15T22:43:29Z

Soils and sediments are soft, amorphous materials with complex microstructures and mechanical properties, that are also building blocks for industrial materials such as concrete. These Earth-mediated materials evolve under prolonged environmental pressures like mechanical stress, chemical gradients, and biological activity. Here, we introduce geomimicry, a new paradigm for designing sustainable materials by learning from the emergent and adaptive dynamics of Earth-mediated matter. Drawing a parallel to biomimicry, we posit that these geomaterials follow evolutionary design rules, adapting their structure and function in response to persistent natural forces through locally evolved interactions and compositions. Our central argument is that by decoding these rules - primarily through understanding the emergence of novel exotic properties from multiscale interactions between heterogenous components - we can engineer a new class of adaptive, sustainable matter. We propose two complementary approaches here. The top-down approach looks to nature to identify building blocks and map them to functional groups defined by their mechanical behaviors, and then examine how environmental training tunes interactions among these groups. The bottom up approach seeks to leverage and test this framework, building earth materials one component at a time under fluctuating environmental stresses that guide assembly of complex and out-of-equilibrium materials. The goal is to create materials with programmed functionalities, such as erosion resistance or self-healing capabilities. Geomimicry offers a pathway to re-imagine climate-resilient soils and precision agriculture to new insights into planetary terraforming, fundamentally shifting the focus from static compositions to dynamic, evolving systems that are mediated via their environment.

2025-11-01T20:15:07Z 21 pages, 5 figures Shravan Pradeep Emanuela Del Gado Douglas J. Jerolmack Paulo E. Arratia http://arxiv.org/abs/2605.16503v1 2026-05-15T18:00:53Z

We study the dynamics of weakly deformed interfaces separating two stable phases, starting from the fluctuating hydrodynamics of the phase-separating fields. Using a well-chosen definition for the interface and the dynamical-action formalism to represent path probabilities, we derive the linear relaxation of the interface and the fluctuations around it for a large class of models. Our method applies to equilibrium dynamics, where it recovers and complements existing results, but also extends to their non-equilibrium counterparts. We explain how non-linear terms can be systematically computed and illustrate their derivations in the case of (active) model A. We highlight the danger of a popular ansatz used to derive interface dynamics, which was rigorously established in equilibrium but is uncontrolled for active field theories.

2026-05-15T18:00:53Z Lila Sarfati Julien Tailleur Frédéric van Wijland http://arxiv.org/abs/2601.09908v3 2026-05-15T17:20:26Z

Chain-like macromolecules in solution, whether biological or synthetic, transform from an extended conformation to a compact one when temperature or other system parameters change. This collapse transition is relevant in various phenomena, including DNA condensation, protein folding, and the behavior of polymers in solution. We investigate the interplay of chain stiffness and range of attraction between monomers in the collapse of a single polymer chain. We use Monte Carlo simulations based on the pruned-enriched Rosenbluth method. We demonstrate that the competition between the persistence length, l_p, and the range of attraction, r_c, determines whether the chain's collapse behavior resembles that of flexible chains or stiff ones. When l_p is larger than r_c, the chain collapses sharply with decreasing temperature, whereas if l_p is smaller than r_c, it contracts gradually. Notably, in the regime of small l_p and large r_c, this rounding into a gradual compaction persists upon increasing the chain length and may remain in place in the limit of infinite chain length. Furthermore, for small r_c, the transition temperature (theta-temperature) increases with l_p, whereas for large r_c the theta-temperature decreases with l_p. Thus, stiffness promotes collapse for small r_c but suppresses it for large r_c. Our findings are in agreement with recent experiments on the contraction of single-stranded RNA as compared to double-stranded DNA, and provide valuable insights for understanding polymer collapse and the essential polymer parameters affecting it.

2026-01-14T22:35:30Z Yanyan Zhu Haim Diamant David Andelman 10.1021/acs.macromol.6c00136 http://arxiv.org/abs/2605.09555v2 2026-05-15T16:18:23Z

We investigate the thermal and structural properties of knotted diblock copolymer rings using a coarse-grained lattice model in an implicit solvent. The system is studied by means of the Wang--Landau Monte Carlo algorithm, allowing us to analyze thermodynamic and conformational responses over a wide temperature range. Different knot topologies, including the unknot, trefoil, figure-eight, and pentafoil knots, are considered for both symmetric and asymmetric monomer compositions. In the AB model employed here, A-type monomers are self-repulsive, B-type monomers are self-attractive, and A-B interactions are neutral, such that the solvent is effectively good for A-type monomers and poor for B-type monomers at low temperatures. We analyze several key observables, including the heat capacity, the radius of gyration, and its temperature derivative for both the entire copolymer ring and the individual blocks, and the probability that a monomer belongs to the knotted region. Our results show that the interplay between knot topology, monomer composition, and temperature strongly influences polymer conformations. Small variations in the B-block length induce nonmonotonic, reentrant-like conformational behavior as a function of temperature, including transitions between knot localization and delocalization at low temperatures. These effects arise from the competition between energetic and entropic contributions imposed by topological constraints.

2026-05-10T14:16:13Z 28 pages, 15 figures, RevTeX 4.1, pdflatex Neda Abbasi Taklimi Franco Ferrari Marcin R. Piątek Luca Tubiana http://arxiv.org/abs/2605.27414v1 2026-05-15T16:15:23Z

Stratospheric aerosol injection (SAI) using solid particles has been proposed as an alternative to sulfate aerosols for solar radiation modification, but practical deployment faces challenges in efficiently deagglomerating and dispersing powders as submicron particles. Here we experimentally demonstrate pneumatic dispersal of particles in optically optimal size ranges for SAI. Using spherical amorphous silica particles, we find that applying a hydrophobic surface treatment substantially improves dispersibility, with 50-85% of treated particle mass achieving submicron sizes compared to 10% for untreated particles. We compare the dispersal of treated particles of different sizes and find that 300 nm particles provide superior deagglomeration than 500 nm particles for the same air consumption. Theoretical modeling of the adhesion forces between particles, combined with surface roughness parameters extracted from atomic force microscopy, successfully predicted the relative dispersibility across different particle types. The pneumatic dispersal system achieved optimal performance at air-to-powder mass ratios of about 10:1. Using the measured dispersed particle sizes, we provide a scaling analysis suggesting that a feasibly sized fleet of dispersal aircraft could provide an aerosol layer sufficient for meaningful climate intervention. These results demonstrate that hydrophobic surface treatment and pneumatic dispersal can overcome the agglomeration challenge for SAI with solid particles.

2026-05-15T16:15:23Z Yair Segev Eitan Y. Levine Yair Bar-Yoseph Ori Amsallem Yuval Dagan Elad Laor Shai Rahamim Alon Luski Eran Daniel Eshani Hettiarachchi Amyad Spector http://arxiv.org/abs/2605.16070v1 2026-05-15T15:32:54Z

Antibody-based therapeutics-including antibody-drug conjugates (ADCs), bispecific antibodies, and novel formats-are reshaping oncology, yet key determinants of efficacy, safety, and manufacturability frequently emerge after conjugation and formulation. We argue that computational biophysics provides an underexploited framework to address this gap by connecting molecular interactions to biological outcomes. We highlight how molecular dynamics, coarse-grained simulations, and free energy calculations reveal how conjugation site, linker chemistry, and drug-antibody ratio reshape conformational landscapes. We emphasize structural coupling between antibody, linker, and payload, with implications for antigen binding, internalization, and developability. We propose that integrating physics-based modeling into development pipelines-alongside experimental validation-can reduce empirical iteration and de-risk translation. As force fields, and hybrid physics-machine-learning methods improve, this field is poised to become a central driver of next-generation ADC design.

2026-05-15T15:32:54Z 16 pages, 2 figures Alberto Ocana Jorge R. Espinosa