https://arxiv.org/api/uytJWy0000L6Q56bHrylh3whjMQ 2026-03-20T16:18:49Z 44585 30 15 http://arxiv.org/abs/2603.17589v1 2026-03-18T10:55:12Z

Measuring the mechanical properties of liquid interfaces without direct contact remains a major experimental challenge, particularly for liquid liquid systems. Here we propose a frequency modulated atomic force microscopy method that probes interfaces through hydrodynamic confinement of a viscous liquid film between an oscillating probe and the interface. The method is first quantitatively validated on a model liquid solid interface, where the measured imepdance and confinement thickness agree with theory over a decade of elastic moduli. It is the aplied to a liquid liquid interface which exhibits a purely viscous response. As a result of the absence of elastic restoring force, the confinement thickness increases to micrometric values. These original measurements demonstrate that hydrodynaic confinement provides a quantitative non-contact probe of liquid interfaces and opens new perspectives for invetigating complex and highly deformable systems.

2026-03-18T10:55:12Z 23 pages, 7 figures Lucie Corral Christian Curtil Medhi Lagaize Marc Leonetti Hubert R. Klein http://arxiv.org/abs/2603.17486v1 2026-03-18T08:50:57Z

Bubble nucleation at catalyst surfaces plays a critical role in the operation of electrolyzers. However, achieving controlled bubble nucleation remains challenging due to limited understanding of the underlying mechanisms. Here, we present a free-energy model that quantitatively predicts both the activation energy and critical nucleus size of bubbles at given supersaturation, temperature, pressure, and surface wettability. We find that the activation energy $ΔG_{max}$ decreases with increasing supersaturation $ζ$, following a power-law scaling of $ΔG_{max} \sim ζ^{-2}$, while the critical nucleus radius $R_c$ scales as $R_c\sim ζ^{-1}$. Our theoretical predictions for the critical nucleus radius of hydrogen, oxygen and nitrogen bubbles are in quantitative agreement with experimental measurements. Finally, we present a simple model that couples gas diffusion and electrochemical reaction kinetics to determine the maximum gas supersaturation at a given current density. Our results advance the fundamental understanding of bubble nucleation at catalyst surfaces and provide practical guidelines for catalyst layer design to improve the performance of electrolyzers.

2026-03-18T08:50:57Z 8 pages, 4 figures Qingguang Xie Paolo Malgaretti Othmane Aouane Simon Thiele Jens Harting http://arxiv.org/abs/2603.17397v1 2026-03-18T06:20:49Z

With the ever-increasing digitization of society, the development of materials with low-power memory storage -similar to synapses- is becoming more relevant. The field of iontronic artificial synapses has gained traction, in particular with polymers as the memory-active material which allows for additional bio-compatibility, flexibility and tunability. Polyelectrolyte brushes are an example of stimulus-responsive materials that can be used in iontronic devices. However, the complexity of current neuromorphic devices does not allow us to isolate and understand the role of polyelectrolyte brushes in their synaptic response. In this paper, we show that polyelectrolyte brushes are capable of synaptic behavior in the most simple of electrochemical cell designs. Furthermore, by combining theory and experimental work, we shed light on the role of brushes in this synaptic behavior and their dynamic stimuli-responsiveness to polarity changes for different salt concentrations. The obtained trends and interpretations of the nonlinear potential-current response, paired-pulse experiments, and accumulative learning lay the foundation for designing and developing polymer brush-based neuromorphic devices.

2026-03-18T06:20:49Z Esli Diepenbroek Leon A. Smook Sissi de Beer http://arxiv.org/abs/2603.17393v1 2026-03-18T06:16:36Z

The phase diagram of self-propelled hard disk systems with Vicsek-type alignment interactions was investigated by event-driven molecular dynamics simulations. The model incorporates two competing order parameters: the polar order-disorder transition associated with collective velocity alignment (Vicsek model) and the orientational order arising from solid-fluid transitions (Alder transition) induced by excluded volume effects. The incompressibility of hard disks suppresses motility-induced phase separation at high packing fractions. Distinctive fluctuations were observed near the transition point, accompanied by anomalous shifts in the transition point as functions of noise intensity and packing fraction. Analysis of local configurational parameters -- specifically, orientational order and circularity of free volume -- provides insight into the microscopic origins of these anomalous phase transition shifts.

2026-03-18T06:16:36Z 6 pages, 4 figures, to appear in J.Phys.Soc.Jpn Nobuaki Murase Masaharu Isobe http://arxiv.org/abs/2603.17391v1 2026-03-18T06:15:23Z

Free energies are fundamental quantities governing phase behavior and thermodynamic stability in polymer systems, yet their accurate computation often requires extensive simulations and post-processing techniques such as the Bennett Acceptance Ratio (BAR). While BAR provides reliable estimates when applied between closely related thermodynamic states, evaluating free energies across large changes in interaction strength typically requires a sequence of intermediate simulations to maintain sufficient phase-space overlap, substantially increasing computational cost. In this work we develop a machine learning framework for rapidly predicting excess free energies of linear diblock copolymer systems from simulation-derived energetic descriptors. Using dissipative particle dynamics simulations of freely-jointed chain polymers, we construct a dataset of per-chain energetic statistics, including heterogeneous interaction energies, homogeneous interaction energies, and bonded spring energies, and train feed-forward neural networks to learn the relationship between these descriptors and free energies computed using a stratified BAR procedure. The resulting models accurately reproduce the reference free energies across a range of chain lengths, compositions, and densities, including polymer architectures held out from training. In regimes where direct, brute-force BAR estimates become unreliable due to poor phase-space overlap, the neural network predictions remain consistent with the reference values. These results demonstrate that physically informed machine learning models can serve as efficient surrogates for expensive free-energy calculations and provide a promising approach for accelerating thermodynamic analysis of polymer systems.

2026-03-18T06:15:23Z Ian Chen Alfredo Alexander-Katz http://arxiv.org/abs/2603.17320v1 2026-03-18T03:31:00Z

The phase separation of purely-repulsive particles induced by self-propulsion is among the most well-studied non-equilibrium phase transitions. However, some notable features of this transition remain open questions, including the origin of bubbles within the dense phase in two dimensions. Various explanations have been proposed, ranging from a reversal of the Ostwald ripening process to topological defects at the borders of hexatic domains. We present particle-based simulations that disentangle the effect of hexatic domains on the bubble size and number distribution through the introduction of polydispersity. While hexatic order is found to be necessary for bubble formation, we also identify thermal translational noise is required for bubble generation. Intriguingly, the magnitude of the thermal noise needed for bubble formation can be remarkably small in comparison with the particle activity but cannot be identically zero. The cooperative motion evidenced within the dense phase of the thermal hexatic domains may may be necessary for bubble production.

2026-03-18T03:31:00Z Luke Langford Ahmad K. Omar http://arxiv.org/abs/2512.19712v3 2026-03-18T02:37:53Z

Curve-fold origami, composed of developable panels joined along a curved crease, exhibits rich dynamic behaviors relevant to metamaterials and soft robotic systems. Despite multiple approximated models, a comprehensive and exact dynamical theory for curve-fold origami remains absent, limiting the precise predictions of its dynamics, especially for those with wide panels. In this work, we develop an exact dimension-reduced theory that focuses on the dynamics of curve-fold origami, utilizing the intrinsic one-dimensional nature of developable surfaces. Starting from a single developable surface, we investigate the kinematics and kinetic energy of a moving developable surface. By overcoming the difficulty of describing the motion of local frames, we derive the exact velocity field of wide surfaces solely described by the motion of the reference curve, which leads to the kinetic energy of the entire surface. Owing to the one-dimensional feature, the Lagrangian of the system, composed of both kinetic and elastic energy, is a functional of the reference curve. Thus, we may variate the Lagrangian and derive a nonlinear dynamical theory for the reference curve, which comprises governing equations similar to the rod model but can precisely describe the motion of developable surfaces. The theory is validated consistently in both Lagrangian and Eulerian frameworks and is further extended to curved-fold origami modeled as a coupled bi-rod system. Utilizing our exact 1D model, we theoretically analyze the dynamical behaviors of various developable structures, revealing that the coupling of curvature and torsion along with the motion of local frames in our theory leads to the accurate modeling of arbitrarily deformed developable surfaces, which are validated by finite element analysis quantitatively.

2025-12-15T07:23:05Z 24 pages Zhixuan Wen Sheng Mao Huiling Duan Fan Feng http://arxiv.org/abs/2603.17180v1 2026-03-17T22:17:46Z

We introduce a mesoscopic model of dynamic Tetra-PEG hydrogel networks based on a hybrid Dissipative Particle Dynamics/Monte Carlo (DPD/MC) approach. Polymer chains are described by Finite Extensible Nonlinear Elastic (FENE) potential, while reversible cross-links are modeled with Morse potential and Monte Carlo bond exchange governed by Bell's force-dependent kinetics. After systematic calibration against theory and experiments, the model reproduces the characteristic Maxwell-like viscoelastic response of these networks. In particular, the relaxation time follows the expected scaling, $τ_R \propto τ_b (p - p_{\text{gel}})$, and the simulated storage moduli agree with experimental rheology. The mesoscopic resolution allows for graph-based topological analysis, where Tetra-PEG molecules and cross-links are represented as nodes and edges, providing access to bond distributions, fraction of dangling chains, and size of percolating clusters that are challenging to measure experimentally. Comparison with permanent-network predictions further suggests that dynamic bond exchange can affect bond distributions and delay the formation of a system-spanning cluster. This model bridges macromolecular bond kinetics and macroscopic mechanical properties, providing a complementary tool for rational design of dynamic polymer networks.

2026-03-17T22:17:46Z Pietro Miotti Lucien Cousin Mark W. Tibbitt Igor V. Pivkin http://arxiv.org/abs/2603.17076v1 2026-03-17T19:04:47Z

Breakloose friction, the transient force peak at the onset of sliding, is often pronounced in nanoscale contacts but weak or absent in macroscopic systems. Although this behavior is commonly associated with rupture fronts and process-zone effects, how the stiction peak is controlled by system size, temperature, driving rate, and loading geometry, and what mechanisms underlie its emergence or suppression, remains incompletely understood. Here we investigate this problem using three minimal friction models with distinct loading geometries: a multi-particle Prandtl-Tomlinson system with independently driven particles, an end-driven Frenkel-Kontorova chain with elastic stress transmission along the interface, and a uniformly driven FK chain in which each site is coupled locally to the driving stage. We show that similar macroscopic suppression of breakloose friction can arise from fundamentally different mechanisms. In multi-particle PT systems, increasing system size or temperature promotes statistical dephasing of local depinning events, smoothing the global response. In end-driven FK chains, internal elasticity redistributes stress along the interface, delaying sliding onset and, together with higher temperature or slower driving, enabling progressive relaxation during loading. In uniformly-driven FK chains, the stiffness of the driving springs controls the synchronization of slip events and thereby the character of the sliding response. These results demonstrate that the presence or absence of a breakloose peak does not uniquely identify a single physical mechanism, but instead reflects the interplay of local pinning, elastic coupling, and contact architecture.

2026-03-17T19:04:47Z 15 pages, 37 references Shubham Agarwal http://arxiv.org/abs/2510.14725v2 2026-03-17T18:34:19Z

Active filaments are a workhorse for propulsion and actuation across biology, soft robotics and mechanical metamaterials. However, artificial active rods suffer from limited robustness and adaptivity because they rely on external control, or are tethered to a substrate. Here we bypass these constraints by demonstrating that non-reciprocal interactions lead to large-scale unidirectional dynamics in free-standing slender structures. By coupling the bending modes of a buckled beam anti-symmetrically, we transform the multistable dynamics of elastic snap-through into persistent cycles of shape change. In contrast to the critical point underpinning beam buckling, this transition to self-snapping is mediated by a critical exceptional point, at which bending modes simultaneously become unstable and degenerate. Upon environmental perturbation, our active filaments exploit self-snapping for a range of functionality including crawling, digging and walking. Our work advances critical exceptional physics as a guiding principle for programming instabilities into functional active materials.

2025-10-16T14:24:38Z Sami C. Al-Izzi Yao Du Jonas Veenstra Richard G. Morris Anton Souslov Andreas Carlson Corentin Coulais Jack Binysh http://arxiv.org/abs/2504.06914v3 2026-03-17T18:09:59Z

Internal activity can fundamentally reshape the mechanical behavior of solids, yet its role in softening and failure remains incompletely understood. In this study, we investigate spontaneous deformations in activated solids via non-affine fluctuations that quantify local rearrangements relative to global strain. Using scaling analysis and numerical simulations, we show that non-affinity in crystalline solids grows quadratically with active speed, increases linearly with persistence time before saturating, and scales inversely with the distance to the melting density. Spatial correlations reveal an activity-dependent growing correlation length, while relaxation dynamics are governed by the active persistence time. With increasing activity, the distributions of local non-affinity broaden, become more skewed, and develop heavy tails, eventually forming a secondary maximum that signals coexisting small and large non-affinities; this heterogeneity precedes defect formation and two-step melting from solid to hexatic and ultimately to fluid. Finally, we demonstrate that spatially patterned activation provides a simple route to locally induce non-affinity and mechanical softening. Our predictions are experimentally testable and suggest a pathway to tunable mechanics in adaptive metamaterials, with implications for mechanical regulation in biological systems.

2025-04-09T14:21:35Z 15 pages, 16 figures; version accepted for publication in Soft Matter Soft Matter (2026) Parswa Nath Debankur Das Surajit Sengupta Debasish Chaudhuri 10.1039/D6SM00142D http://arxiv.org/abs/2603.17027v1 2026-03-17T18:06:35Z

We study stochastic resetting of a probe particle in a viscoelastic environment where only the probe is reset while the medium retains memory of its past dynamics. Using a minimal model with finite correlation time, we analyze the competition between the resetting timescale and the viscoelastic relaxation timescale. This interplay leads to nonequilibrium steady states that differ qualitatively from those of Markovian Brownian motion with resetting. In particular, strong memory effects produce stationary position distributions with non-exponential tails. For instantaneous resets, we derive the limiting steady-state distributions analytically and compute exactly the time dependent leading non-vanishing moments. We also investigate non-instantaneous resetting via constant-velocity return protocols. In contrast to overdamped Brownian motion, where steady-state fluctuations are independent of the return dynamics, we find that in a viscoelastic medium the fluctuations depend on the reset velocity. This protocol dependence arises from the finite memory of the environment and highlights the role of environmental correlations in resetting-induced steady states.

2026-03-17T18:06:35Z Ion Santra Debankur Das http://arxiv.org/abs/2603.16820v1 2026-03-17T17:24:31Z

Fluid gels are soft materials formed by shearing biopolymer solutions during the sol-gel transition. Their ability to yield and flow beyond a critical stress makes them attractive for designing versatile, biocompatible materials in food, health care and medical applications. Although it is well established that both microstructure and mechanical properties depend on the shear applied during gelation, a unified physical framework linking these features remains lacking. Here, using $κ$-carrageenan gels as a model system, we use a combination of rheology and confocal microscopy to tackle their shear-induced structuring in fluid gels. We identify a thermo-rheological memory in $κ$-carrageenan gels formed under flow and show that it arises from a competition between shear and interparticle adhesion, captured by an Adhesion number. The resulting microstructural evolution is reminiscent of the behavior of attractive particulate dispersions under simple shear flow, thereby bridging gels made of macromolecules and particulate gels. This framework provides a route to tune fluid gel properties without altering their composition.

2026-03-17T17:24:31Z Julien Bauland Tim J. Wooster Peter Fischer Jan Vermant http://arxiv.org/abs/2603.16804v1 2026-03-17T17:08:57Z

Suspensions of attractive particles form space-spanning networks that endow the suspension with solid-like behavior at rest. The microstructure of these colloidal gels depends sensitively on the shear history and on the path followed across the sol-gel transition, resulting in viscoelastic properties that can be tuned by shear. Here, we report in situ X-ray tomo-rheoscopy experiments on carbon black gels whose elastic properties exhibit a non-monotonic dependence on the shear intensity applied prior to flow cessation. By directly imaging the gel microstructure under a well-controlled rheological protocol, we reveal the emergence of pronounced structural heterogeneities extending from tens to hundreds of microns -- length scales far larger than those accessible by conventional scattering techniques such as Ultra-Small Angle X-ray Scattering. In particular, we show that only the low-shear reinforcement of elasticity correlates with a growing mesoscale correlation length, while high-shear strengthening occurs without detectable mesoscale reorganization. These observations demonstrate that flow memory in colloidal gels is not solely governed by local particle rearrangements, but is also encoded in a mesoscale structural organization extending up to 100 times the particle size. More broadly, this work highlights the power of X-ray tomo-rheoscopy to uncover large-scale structural signatures of flow history in soft materials, opening new perspectives to tailor their mechanical properties.

2026-03-17T17:08:57Z Julien Bauland Stéphane G. Roux Stefan Gstöhl Christian M. Schlepütz Michael Haist Thibaut Divoux http://arxiv.org/abs/2603.16778v1 2026-03-17T16:56:04Z

The realization of efficient micro-machines built from active matter requires precise thermodynamic control far from equilibrium. Despite theoretical progress, the focus on single-parameter driving, coupled with strict theoretical assumptions, limits efforts to capture modern multi-parameter control experiments. Here, guided by careful theoretical considerations, we develop a transparent computational framework based on exact-gradient descent via automatic differentiation. We derive optimal protocols for a wide range of multi-parameter problems -- involving trap stiffness, trap center, and particle activity -- to minimize the thermodynamic work or heat. We demonstrate that smoothed, experimentally plausible protocols -- obtained by assigning kinetic costs to the controls -- achieve near-optimal efficiencies comparable to discontinuous ``bang-bang'' solutions. By exploring both open- and closed-loop control, we find the dynamical coupling between parameters leads to genuinely new strategies, including symmetry breaking in optimal activity cycles and non-monotonic trap stiffness controls. Further, we identify regimes where initial measurement and multi-parameter flexibility combine to improve efficiency. Finally, we reveal that the naive simultaneous execution of independently optimized controls incurs only slightly more work than the full multi-parameter solutions. Taken together, our work elucidates the non-equilibrium physics of multi-parameter control and provides robust, scalable strategies for controlling active matter.

2026-03-17T16:56:04Z 16 pages, 12 figures Luke K. Davis