Thermodynamic and structural behavior of one-dimensional divalent patchy hard rods: Wertheim's first-order thermodynamic perturbation theory versus exact results

2026-05-20T10:41:26Z

We investigate the thermodynamic and structural properties of divalent patchy hard rods confined to a one-dimensional channel by modeling the bonding sites as attractive square-well (SW) patches located at the rod tips. The zero-range sticky limit is recovered by letting the well width vanish while keeping the stickiness parameter finite. While Wertheim's first-order thermodynamic perturbation theory (TPT1) becomes exact in this sticky limit, it fails for finite-range site-site interactions. We show that the theory can be made exact in one dimension by replacing the standard law of mass action with an exact relation between the density and the fraction of unbonded sites, together with an exact bonding free-energy contribution. Finite-range SW sites produce a richer structural behavior than sticky sites, including monotonic and oscillatory asymptotic decay of the pair correlation function, separated by the Fisher--Widom line. In the monotonic regime, the correlation length exhibits an absolute maximum defining the Widom line, while in the oscillatory regime it may display a local maximum and minimum, whose locus defines the ``Extrema of the Correlation length under Oscillatory decay'' (ECO) line. These features disappear in the sticky limit, where the system remains entirely in the oscillatory regime. We also show that the high-pressure behavior of the correlation length changes from $ξ\sim p^2$ for finite-range SW sites to $ξ\sim p^3$ in the sticky limit.

Origin of Persistent Boundary Motion in Confined Active Matter

2026-05-20T09:24:37Z

Active matter systems under confinement display persistent surface motion and a strong boundary affinity. However, despite extensive studies of their positional dynamics, much less attention has been given to the corresponding orientational behavior. Here, using molecular simulations of an active Brownian particle confined within a hard circular boundary and the Fokker-Planck equation, we show that the positional distribution of the particle is directly coupled to orientational fluctuations, as characterized by the conditional orientational distribution. Confinement generates two preferred tangential orientational states connected by stochastic flipping pathways: rapid boundary-localized switching and slower bulk-mediated excursions. Further, the positional distribution exhibits a nontrivial power-law decay with distance from the boundary that is closely linked to curvature-induced bistable orientational states and the variance of the associated conditional distribution. The mean waiting time between flips exhibits power-law dependence on the confinement strength. Our results establish that the interplay between orientational fluctuations, bistability, positional accumulation, and stochastic switching governs the observed dynamics of active particles under confinement, providing a framework for understanding transport, exploration, and escape processes in confined active systems.

Monte Carlo simulation of selective adsorption in a binary hard-disk mixture on patterned adhesive surfaces

2026-05-20T08:20:33Z

Selective adsorption in a two-dimensional model of a binary hard-disk mixture on patterned adhesive surfaces is studied using grand canonical Monte Carlo simulations. The two species have equal diameters and equal bulk chemical potentials, but different attraction strengths to adhesive domains. Thus, affinity-driven selectivity is separated from particle-size asymmetry and unequal chemical potentials. The surface pattern is defined by domain size, domain surface coverage, and ordered or disordered arrangement of circular domains. The results show that selectivity depends strongly on surface geometry, especially at low and intermediate chemical potentials. Domains comparable to the particle size enhance selectivity by forming adsorption regions with large particle-domain overlap, whereas larger domains can provide high selectivity at low chemical potentials. For small domains, further reduction in size can also increase selectivity as the system approaches a uniform attractive surface with corresponding effective affinity parameters of the species.

Unifying Plasticity in Ordered and Disordered Matter using Topological and Geometrical Descriptors

2026-05-20T07:39:07Z

Identifying the regions responsible for plastic flow in amorphous solids remains an open problem, since structural disorder seems to prevent the direct application of concepts such as dislocations, topological defects that successfully describe irreversible deformations in crystalline systems. Here, we introduce fields of dislocation, disclination, and incompatibility densities, that reduce to the standard sources of plasticity in crystals and assess their predictive power in amorphous materials. We find that, in a simulated two-dimensional glass as well in two- and three-dimensional experimental granular systems, these fields exhibit strong spatial correlations with $D^2_{\text{min}}$, the standard measure used to locate plastic events under shear in disordered solids. Unlike $D^2_{\text{min}}$, these fields also allow to disentangle rotational and translational contributions to the plastic events, revealing that rotational defects becoming dominant in three dimensions. Our approach paves the way for a unified description of plasticity in crystalline and amorphous solids.

What Lies Between Crystal and Randomly Packed Structures? A General Characterization of Non-Periodic Order

2026-05-20T05:07:23Z

In this paper we address the characterization of the structure of condensed materials, periodic and non-periodic. Carrying out an extensive study of over 7000 different groundstate structures of a 2D lattice model of binary packing, we find a predominance of non-periodic structures (over 96%) that extend across the entire range of possible diversities. These non-periodic structures are resolved by establishing whether a structure will accommodate or reject additional local structures. This property, structural selectivity, is treated as a signature of an underlying ordering principle. The major result of the paper is the determination that roughly 35% of the non-periodic structures are selective and, hence, ordered in some way. This selectivity extends up to a diversity of ~ 9, well beyond the upper threshold for diversity in periodically ordered states.

Morphological evolution of a semiconductor surface driven by irradiation-induced anisotropic plastic flow

2026-05-19T20:49:50Z

While numerous models exist which explain certain aspects of irradiation-induced nanopatterning on semiconductors, a comprehensive theoretical explanation has remained elusive. However, it is increasingly apparent that such a model will require understanding the dual influence of the collision cascade initiated by ion implantation: first, as a source of material transport by sputtering and atomic displacements occurring over short time scales, and, second, as a source of defects permitting viscous flow within the thin, amorphous layer that results from sustained irradiation over longer time scales. To better understand the latter, we develop several asymptotic approximations for coupling the local ion flux experienced by the amorphous layer to the layer's evolving free interface. From these and the physical hypothesis of irradiation-induced anisotropic plastic flow, or ``ion-hammering", we derive a generalized Kuramoto-Sivashinsky-type equation for the evolving free surface. With physically plausible parameters, the present model achieves good quantitative and qualitative agreement with several aspects of experimental observations of nano-pattern formation during irradiation of silicon by argon, krypton and xenon, and with projectile energies from 500eV to 2keV. Disagreements between model and experiment are discussed, as are implications for future directions.

Inverse Design of Metainterfaces for Static Friction Control: Beyond the Hertzian Limit

2026-05-19T14:58:10Z

Programming the static friction of mechanical interfaces is critical for soft robotics, haptics, and precision gripping. Static friction is governed by the real contact area, and standard rough surfaces exhibit a linear area-load scaling inherent to classical Archard and Greenwood-Williamson models, severely restricting their functional range. Here, we propose a framework for the inverse design of tribological metainterfaces engineered for programmable contact behaviors. By utilizing general axisymmetric asperities, we unlock nonlinear macroscopic responses unattainable by standard Hertzian contacts. To solve the inverse problem, we embed a fully differentiable contact mechanics engine within a neural network and a quadratic optimizer. We leverage regularized physical gradients to automatically discover non-standard topographies that reproduce complex target friction laws, with only a few asperities in unit cells. The predicted designs are strictly validated against high-fidelity Boundary Element Method (BEM) simulations. This framework bridges data-driven optimization and rigorous physics, offering a scale-invariant pathway for discovering functional tribological surfaces.

Percolation of a cohesive fine particle in a static bed

2026-05-19T13:40:04Z

Percolation of fine particles (fines) in a static bed of larger particles is central to many industrial and natural processes. Non-cohesive fines either pass through the bed or become trapped depending on multiple factors including particle sizes, friction and restitution coefficients, and size-polydispersity. Here we consider the additional factor of cohesion. We use the discrete element method to simulate gravity-driven percolation of cohesive fine particles through a static bed of randomly packed large particles; fines interact with bed particles but not with each other. A large-to-fine particle diameter ratio of 7 geometrically permits non-cohesive fines to pass the narrowest pore throats formed by the large particles so they can freely percolate. However, sufficiently large cohesion and friction lead to non-geometric trapping. Fines are trapped when they fail to rebound after a collision, due to large cohesion, low restitution, and low collision velocity, and any subsequent rolling or sliding is insufficient to cause detachment. This establishes a sequence of local interactions -- collision, adhesion, and post-contact motion -- that governs the ultimate fate of a fine particle. A collisional model that incorporates a trapping probability per collision and a collision frequency predicts the trapping distance in the regime dominated by collision-induced trapping. For non-rebounding collisions, frictional effects are enhanced by cohesion and, when large enough, prevent the fine particle from subsequently detaching. A static equilibrium condition based on force balance predicts whether a fine particle remains stationary after contact. These results show that percolation of cohesive fine particles is not determined by geometric accessibility alone, but also by particle-scale interaction dynamics that can override geometric expectations.

Dynamical renormalization group analysis of $O(n)$ model in steady shear flow

2026-05-19T11:21:24Z

We study the critical behavior of the $O(n)$ model under steady shear flow using a dynamical renormalization group (RG) method. Incorporating the strong anisotropy in scaling ansatz, which has been neglected in earlier RG analyses, we identify a new stable Gaussian fixed point. This fixed point reproduces the anisotropic scaling of static and dynamical critical exponents for both non-conserved (Model A) and conserved (Model B) order parameters. Notably, the upper critical dimensions are $d_{\text{up}} = 2$ for the non-conserved order parameter (Model A) and $d_{\text{up}} = 0$ for the conserved order parameter (Model B), implying that the mean-field critical exponents are observed even in both $d=2$ and $3$ dimensions. Furthermore, the scaling exponent of the order parameter is negative for all dimensions $d \geq 2$, indicating that shear flow stabilizes the long-range order associated with continuous symmetry breaking even in $d = 2$. In other words, the lower critical dimensions are $d_{\rm low} < 2$ for both types of order parameters. This contrasts with equilibrium systems, where the Hohenberg -- Mermin -- Wagner theorem prohibits continuous symmetry breaking in $d = 2$.

The fracture resistance of elastic networks increases with the density of defects like a random walk

2026-05-19T11:17:09Z

Disordered spring networks are a well-established model system to study fracture in a wide range of materials, from ceramics to polymer networks and mechanical metamaterials, across length scales from the atomistic to the macroscopic. A central quantity characterizing fracture is the apparent fracture energy $G^c$, which measures the resistance to the propagation of a preexisting dominant crack. While it is well established that disorder can increase $G^c$ through crack arrest by local inhomogeneities, its dependence on the degree of disorder remains poorly understood. Here, we study the effect of varying concentrations of missing bonds on crack propagation of an otherwise perfect two-dimensional triangular network of springs. For a given network with a fixed concentration of missing bonds, the apparent fracture energy $G^c(a)$ increases with crack advance $a$. This behavior can be explained by mapping the effect of the missing bonds onto an equivalent local fracture energy landscape $Γ^{loc}(a)$ and applying established theories linking planar crack arrest with fluctuations in $Γ^{loc}(a)$. For increasing fraction of missing bonds $ν$, the standard deviation of the fluctuations of $Γ^{loc}$ increases with $\sqrtν$, which we explain by considering a random-walk-like superposition of perturbations caused by individual missing bonds. We demonstrate that as a consequence of crack arrest by fluctuations in $Γ^{loc}$, the average $G^c(a)$ follows the same $\sqrtν$ scaling. Furthermore, we observe that the probability density of $Γ^{loc}$ has an exponential tail leading to a logarithmic increase of $G^c(a)$ with crack advance $a$. Our results quantitatively link microstructural disorder to macroscopic fracture energy and paves the way for quantitative predictions of the fracture energy in a wide variety of materials.

Engineering Tunable Synthetic Su-Schrieffer-Heeger Chains in Liquid Crystal Microcavities

2026-05-19T10:57:31Z

Optical microcavities have emerged as a powerful platform for emulating topological phases challenging to realize in conventional materials, offering precise control over dispersion, light confinement, and interactions. Among them, liquid crystal microcavities (LCMCs) offer exceptional tunability at room temperature, enabling voltage-controlled polarisation splitting, photonic spin-orbit coupling, and photonic potentials generated by self-assembled textures, such as cholesteric torons and uniform lying helix (ULH). Here, we design a LCMC hosting a dimerized ULH texture and show that the corresponding photonic potential describes two coupled Su-Schrieffer-Heeger chains with orthogonal linear polarisations, acting as an effective pseudospin degree of freedom. The applied voltage tunes the interchain coupling, enabling polarisation-dependent interactions. These results establish LCMCs as a versatile platform for tunable synthetic topological Hamiltonians.

Tracking Coupled Granular Temperature and Entropy Dynamics in Granular Materials via Dielectric Spectroscopy

2026-05-19T09:04:12Z

In glass-forming liquids, structural dynamics are governed by configurational entropy and temperature, with dielectric relaxation time scaling alongside structural relaxation time as described by the Adam-Gibbs (AG) model. Under Edwards's athermal statistical thermodynamics, a modified AG law similarly governs granular matter, provided that granular temperature and configurational entropy are appropriately defined. This study investigates whether variations in the structural relaxation of granular systems can be probed via thermally activated processes, specifically electric charge hopping and trapping. By progressively reducing the volume of graphite powder to vary its packing fraction, we estimated relative configurational entropy and granular temperature from volumetric data, while evaluating electrical conductivity and capacity via impedance spectroscopy. We demonstrate that the logarithm of the dielectric relaxation time, derived from complex impedance, scales with granular temperature and entropy across both loose and compact states. Consequently, changes in the complex impedance resulting from packing fraction variations are tuned by granule configuration, strictly adhering to an AG-like relationship for thermal systems. These findings establish dielectric spectroscopy as a viable, non-destructive tool for tracing configurational dynamics in granular matter, analogous to its established use in polymers and glass formers.

PACSim: A Flexible Simulation Framework for Polymer-Attenuated Coulombic Self-Assembly

2026-05-19T02:15:52Z

Polymer-Attenuated Coulombic Self-Assembly (PACS) is a flexible experimental approach for generating crystals from simple colloidal building blocks. The central components are charged spherical particles coated with a polymer brush that prevents irreversible aggregation. Whether oppositely charged colloids crystallize, and which structures they form, depends on several factors, including colloid concentration, charge, and size, as well as the salt concentration of the solution. Molecular dynamics (MD) simulations are a powerful tool for predicting the outcomes of PACS assembly experiments and also provide particle-level insight into the assembly processes. Here, we present an open-source simulation framework, PACSim, that enables MD simulation studies of assembly by PACS across a range of experimentally relevant scenarios. PACSim is built on top of OpenMM, a flexible MD simulation framework that readily supports the implementation of different interaction potentials, as well as integration with other tools such as enhanced-sampling and machine-learning frameworks. We describe the motivation for PACSim, outline its features, report methodological advancements inspired by this framework, and provide examples of its use.

Mass Generation from Embedding Geometry in Surface Nematics

2026-05-18T23:07:51Z

We show that a nematic field constrained to a curved embedded surface develops an emergent geometric mass in its leading isotropic interaction sector. An auxiliary embedding-space closure mediated by the surface spin connection yields a massive scalar mode $χ_n$ with mass set by the extrinsic curvature invariant $m^2=K_{ab}K^{ab}$. This mass arises directly from embedding geometry, promoting the intrinsic massless nematic interaction into a geometry-controlled massive field. The resulting theory identifies Gaussian curvature as a distributed geometric charge and establishes embedding geometry as the regulator of defect interactions on curved nematic membranes.

Importance of nuclear quantum effects on the structure of supercooled water around its liquid--liquid critical point

2026-05-18T22:57:00Z

Supercooled water is expected to exhibit a liquid--liquid phase transition between low- and high-density liquid states, possibly terminating in a liquid--liquid critical point in the experimentally difficult no man's land. Because the hydrogen atoms are light, nuclear quantum effects (NQE) may alter the structural signatures used to identify this transition. Here, we compare classical molecular dynamics and path-integral molecular dynamics simulations of a flexible q-TIP4P/F-like water model in the deeply supercooled regime. The classical simulations show a pronounced density change at 180 K between 180 and 220 MPa, whereas the path-integral simulations exhibit a smoother pressure dependence. Radial distribution functions and bond-order parameters show that NQE broaden pair correlations, reduce the tetrahedral order of the first hydration shell, and slightly increase the Steinhardt $Q_6$ parameter. These results demonstrate that NQE modify both low- and high-density liquid structures and therefore need to be included when interpreting structural signatures of the liquid--liquid transition in supercooled water.