https://arxiv.org/api/jt7BQaYkVCMNiYfbpbkr4Pa2/mI 2026-09-11T19:55:03Z 46066 15 15 http://arxiv.org/abs/2609.11048v1 2026-09-10T03:51:11Z

The characteristic intersection angle of the desiccation crack relaxes from near \ang{90} toward \ang{120} under repeated drying--wetting cycles. However, the theoretical understanding of this relaxation is insufficient, especially the modeling of the drying--wetting cycles. Here we introduce a phase-field model of desiccation fracture, extending the model proposed in previous studies by adding crack healing and a scar effect left by past cracks. By repeating drying--wetting cycles in a finite element simulation, we find that the angle distribution develops a growing peak near \ang{120} as the cycle number increases, consistent with experiments. The standard deviation of the intersection angle from \ang{120} relaxes exponentially with a characteristic time of about 2.85 cycles. These results are consistent with experiments, except that the characteristic time is slightly smaller than the experimental value. Crack energy dominates the total energy and also relaxes exponentially with nearly the same characteristic cycle as the angle relaxation. This decay is driven mainly by a shortening of the effective crack length rather than a change in effective fracture toughness.

2026-09-10T03:51:11Z 38 pages, 10 figures Hiroki Fukushima Satoshi Yukawa http://arxiv.org/abs/2609.11036v1 2026-09-10T03:34:02Z

Saddle points in the energy landscape of granular packings dominate the discrete steepest descent dynamics and ultimately determine the path that an out of mechanical equilibrium packing will follow and the resulting stable minimum that it will find. The saddle points that ultimately determine the resulting minima tend to be low-index saddle points. For models with an analytic energy landscape, such as the $p$-spin model, the steepest descent minimization path is affected by higher-index saddle points, which pull the system towards saddle points of decreasing index before arriving at the minima. Here, we examine the steepest descent minimization path of granular packings and compare them to the $p$-spin model. We show that the granular packing steepest descent minimization paths act like their smooth energy landscape counterparts and get attracted by saddle points. The index versus time curves for all models follow a shifted, stretched exponential. We further show that the shape parameter for the granular packings is unchanged when the energy landscape is modified to become analytic (Gaussian potential in a harmonic well) or non-local (Mari-Krzakala-Kurchan). The $p$-spin, on the other hand, has a significantly larger shape parameter. The reason is not due to the dimensionality, packing fraction, nonanalyticity, or the locality of the Hamiltonian of the models. The exact reason for the discrepancy in the shape parameter is \st{still} an unsolved mystery.

2026-09-10T03:34:02Z 12 pages, 10 figures Eddie Bautista Eric Corwin http://arxiv.org/abs/2609.09057v2 2026-09-09T20:29:39Z

Discrete models are frequently used in multiparticle dynamics simulations to capture hydrodynamic interactions between colloidal particles and the solvent as well as to represent anisotropic pairwise interactions between colloidal particles; however, there is currently limited guidance on how to reliably parameterize these models. Here, we first compare strategies for selecting the density and mass of discrete surface sites used to couple colloidal particles to the solvent, finding that using a minimum of 2 sites per unit area with a scheme that matches the total mass and moment of inertia for a neutrally buoyant solid particle produces reliable and accurate results for the transport properties of colloidal particles at both infinite dilution and in suspension. We then compare strategies for representing the excluded volume of nearly-hard shape-anisotropic colloidal particles using a collection of discrete interaction sites with isotropic repulsion, finding that having a discrepancy between the nominal volume and the excluded volume of the particle can significantly affect suspension transport properties. This discrepancy can be mitigated by placing the interaction sites inside and tangent to the surface of the colloidal particle. We expect these findings to help construct discrete models for colloidal particles with less sensitivity to parameterization.

2026-09-08T17:13:43Z Michaela Bush Michael P. Howard http://arxiv.org/abs/2508.11000v4 2026-09-09T19:48:09Z

Phase separation driven by nonequilibrium fluctuations is a hallmark of both living and synthetic active matter. Unlike equilibrium systems, where ordered states arise from the minimization of free energy, active systems are fueled by a constant injection of energy at the microscopic scale. The emergence of ordered phases in such driven systems challenges our conventional views of domain growth and interfacial structure. In this study, we investigate the coarsening of colloidal clusters in active liquids containing E. coli. Our experiments reveal that uniform dispersions of colloids and swimmers are inherently unstable, resulting in spontaneous phase separation characterized by fractal interfaces and unconventional kinetics. The correlation function of the order parameter displays dynamical scaling, with the size of colloidal domains initially growing as $t^{1/z}$, where $z \sim 4$, in contrast to the well-known growth laws for thermal systems with a conserved order parameter. Furthermore, the structure factor exhibits non-Porod behavior, indicating domains with fractal interfaces. This non-Porod behavior also manifests itself as a cusp singularity in the correlation function. We elucidate our experimental findings using a scalar field theory in which the nonequilibrium fluctuations arising from swimmer activity are modeled as spatio-temporally correlated noise. It quantitatively reproduces the domain growth law and non-Porod structure factor resulting from fractal interfaces observed in experiments. In addition, it also reveals a fluctuating microphase separation, where the initial growth of the domain is eventually arrested, thus shedding new light on the microscopic origins of the unconventional phase separation of colloids in active liquids.

2025-08-14T18:06:26Z Pragya Kushwaha Pratikshya Jena Partha Sarathi Mondal Nayanthara J R Sanjay Puri Shradha Mishra Vijayakumar Chikkadi http://arxiv.org/abs/2605.06773v3 2026-09-09T19:37:33Z

We propose a test of conformal invariance in critical phenomena based on the study of a two-point correlation function in the presence of a boundary. This two-point function can be studied using X-ray or neutron scattering in the conditions of total reflection (so-called grazing scattering). The conformal Ward identity in momentum space is here expressed as a differential constraint on the scattering cross-section, as a function of the momentum transfer and the scattering angle. Experimental verification using X-rays and binary alloys appears well within the existing techniques, while feasibility for neutron scattering requires further study. This would be the first direct experimental test of conformal invariance in critical phenomena, a symmetry widely assumed but never directly verified.

2026-05-07T18:00:01Z 42 pages, 11 figures. v3: Minor changes, auxiliary files with numerical computations added, version accepted by Phys. Rev. B Alessandro Podo Slava Rychkov http://arxiv.org/abs/2609.10519v1 2026-09-09T17:51:12Z

The Jarzynski relation enables the estimation of equilibrium free energy differences from non-equilibrium, finite-time switching simulations. These estimates usually converge poorly because rare trajectories dominate the exponential work average. Here, we numerically determined and explored the sequence of intermediate Hamiltonians connecting initial and final states that minimize the mean squared error (MSE) of the Jarzynski estimator and thereby enhance convergence. For discrete-time Markov models, an exact tilted-master-equation representation of the MSE in the large-sample limit, combined with automatic differentiation, enables efficient gradient-based minimization over all intermediate energies. We applied our approach to three model systems of increasing complexity: a two-state model, a double-well potential, and a shifted potential well. In all three systems, the optimal intermediate Hamiltonians jump at the initial and final times. Extensive Monte Carlo simulations show that optimal intermediates can reduce the MSE by more than an order of magnitude compared with linear and logarithmic interpolation, most strongly for large changes in the energy landscape. Remarkably, they need not dissipate less work than intermediates yielding larger errors. Our results suggest heuristics for more efficient non-equilibrium free energy calculations of realistic molecular systems: optimal intermediate Hamiltonians jump at the initial and final times; for barrier-crossing problems, the barrier should be lowered rapidly and raised again later; and minimizing dissipation does not guarantee faster convergence.

2026-09-09T17:51:12Z 15 pages, 5 figures David Beyer Helmut Grubmüller http://arxiv.org/abs/2609.10393v1 2026-09-09T16:12:53Z

A compressible, non-isothermal dilute polymer solution is formulated as a Class-II binary mixture with separate solvent and polymer mass and momentum balances and with total energy and entropy balances for the complete mixture. The entropy exploitation is sharpened by a balance-anchoring axiom introduced here: in a fixed balance representative, each selected binary dissipative product contains a constitutive factor from an unclosed balance flux or source. Polymer configuration is resolved first by a connector distribution and then by its conformation tensor. Population kinematics fix polymer transport and, by moments, yield a two-velocity upper-convected rate; objectivity verifies covariance rather than selecting it. Within the total entropy balance, configurational transport and deformation powers cancel their chemical-potential and elastic partial-stress counterparts when deformation and stress-decomposition weights match. A Gordon--Schowalter test independently requires the affine upper-convected choice for the stated dumbbell free energy and Kramers stress unless an additional reversible channel is supplied. Coordinated stress--interaction changes shift the local entropy flux/production pair by a divergence, exposing representation dependence of local mechanism-wise production. An entropy-invariant Class-II-to-Class-I reduction selects a descendant entropy flux preserving the parent production and yields thermo-chemical, configurational-stress and partial-viscous-stress diffusion terms. The omitted quadratic relative-inertia flux is paired with relative kinetic-energy storage and transport and is a reversible truncation, not missing entropy production. The resulting compressible non-isothermal Hookean stress and temperature equations reduce to Oldroyd-B/UCM only after one-velocity, incompressible and isothermal limits.

2026-09-09T16:12:53Z Dieter Bothe http://arxiv.org/abs/2609.10359v1 2026-09-09T15:54:05Z

Quantifying the degree of order/disorder in many-particle systems remains an outstanding problem in physics, materials science, and mathematics. To this end, we consider the translational order metric $τ_T$, defined as the squared $L^2$ norm of the total correlation function $h(\mathbf{r})$, and introduce its bond-orientational analogue $τ_O$, defined from the weighted total correlation function $h_{\mathbf{f}}(\mathbf{r})$ using local orientational weights (S. Torquato et al., Phys. Rev. X 16, 011042 (2026)). The pair $(τ_T,τ_O)$ places both forms of order on a common two-point statistical footing. We compute both metrics for two nonhyperuniform sphere-packing models in 2D and 3D as functions of packing fraction $φ$: 1) equilibrium hard particles and 2) nonequilibrium random sequential addition (RSA) packings. For the nonhyperuniform systems, bond-orientational order remains subdominant along the equilibrium-fluid and RSA configurations; however, its magnitude relative to the translational metric increases near the upper end of the equilibrium-fluid branches, much more strongly in 2D than in 3D, and the two metrics become comparable along the sampled crystal branches. At common packing fractions, equilibrium fluids and RSA packings trace distinct $(τ_T,τ_O)$ trajectories, revealing preparation-dependent differences in structural order. As a representative hyperuniform family, we study 2D disordered stealthy hyperuniform (SHU) ground states for $0<χ<1/2$, where $χ$ is the stealthiness parameter. Within the disordered SHU phase, bond-orientational order remains subdominant, but its magnitude relative to the translational metric increases toward the disorder-to-order threshold. In all three models, $τ_T$ and $τ_O$ are positively correlated beyond the Poisson-reference regime: $τ_O$ increases monotonically with $τ_T$ across the sampled state points.

2026-09-09T15:54:05Z 17 pages, 24 figures Anirban Mukherjee Salvatore Torquato http://arxiv.org/abs/2401.14690v4 2026-09-09T15:28:40Z

Nonreciprocal interactions are known to produce distinctive dynamics in active matter. To shed light on how the stationary state of such systems is affected by breaking reciprocity, we consider interacting particles propelled by persistent noise, where reciprocity is broken by a transverse force perpendicular to the gradient of the interaction energy. Focusing on the steady-state distribution of positions, we show that the nonreciprocal coupling helps keep the system at its stable configurations. Specifically, we demonstrate this effect for a variety of active systems whose stable configurations are energy minima, finding that the nonreciprocal coupling stiffens springs, aligns spins, and improves associative memory. In contrast, the transverse force does not change the stationary distribution of positions at all when the noise is thermal. Preliminary simulations suggest that this nonreciprocal coupling plays a similar stabilizing role in other active systems, such as those exhibiting motility-induced phase separation, whose stable configurations are not energy minima.

2024-01-26T07:23:09Z Matthew Du Andriy Goychuk Suriyanarayanan Vaikuntanathan http://arxiv.org/abs/2609.10247v1 2026-09-09T14:35:31Z

We compare three particle-scale measures of rearrangement in highly polydisperse materials under driven flow: (a) nonaffine motion defined relative to the time-averaged mean flow, (b) changes in nearest-neighbor connectivity, and (c) $D^2_{\min}$, which measures nonaffine motion relative to an affine deformation fitted locally in space and time [Falk and Langer, Phys. Rev. E 57, 7192 (1998)]. We apply these measures to previously published two-dimensional simulations [Jiang, Sussman, and Weeks, Phys. Rev. E 108, 054605 (2023)] and granular-flow experiments [Illing and Weeks, Phys. Rev. E 111, 045422 (2025)] with polydispersities up to $δ\approx0.50$. Changes in connectivity and $D^2_{\min}$ both require a definition of neighboring particles, making the choice of neighborhood nontrivial in highly polydisperse systems. For detecting changes in connectivity, we recommend radical Delaunay triangulation, which provides a size-aware topological definition of neighbors. For calculating $D^2_{\min}$, we recommend a size-aware pairwise cutoff distance method. We further show that changing the neighborhood definition can reverse the apparent dependence of $D^2_{\min}$ on particle size in experimental data. Thus, trends in $D^2_{\min}$ cannot be interpreted independently of the neighborhood used to calculate it. Overall, the three measures presented provide complementary information about rearrangements in highly polydisperse systems.

2026-09-09T14:35:31Z When particles come in every size, even deciding who counts as a neighbor can turn the story upside down. We show how that simple choice changes what you see when a material rearranges Waad Paliwal Eric R. Weeks http://arxiv.org/abs/2609.10188v1 2026-09-09T13:55:54Z

The organization of multiple knots along a polymer contour can depend sensitively on the topology of the constituent knots. Using coarse-grained Brownian-dynamics simulations, we investigate topology-dependent mixing of two knots in a flexible polymer at controlled normalized wall separation. We compare homogeneous ($3_1\otimes 3_1$) and heterogeneous ($3_1\otimes 5_1$) knot pairs using a contour-based coordinate that distinguishes mixed and demixed configurations. Starting from partially overlapping configurations, the $3_1\otimes 5_1$ pair is observed in mixed configurations more frequently over the simulation time window than the $3_1\otimes 3_1$ pair at intermediate wall separation. We further find that, over the intermediate range of normalized wall separation, mixing of the $3_1\otimes5_1$ pair produces a composite knotted region that occupies substantially less polymer contour than the two constituent knots collectively occupy in demixed configurations. The corresponding reduction in contour occupancy is much smaller for the $3_1\otimes3_1$ pair. This indicates that the heterogeneous constituent topologies can be accommodated within a smaller portion of the polymer contour in the composite configuration. These results establish that constituent topology can strongly influence multiple-knot organization in flexible polymers.

2026-09-09T13:55:54Z 13 pages, 10 figures Souradeep Sengupta Garima Mishra http://arxiv.org/abs/2604.05789v2 2026-09-09T13:55:35Z

The phenomenon of salt creeping along a free surface remains only partially understood, particularly with respect to its dynamics. In this work, combining a theoretical model with controlled experiments, we identify three distinct kinetic regimes: an initial exponential growth of the height of the crystallized salt deposit on vertical walls, followed by a linear regime, and a final stage where the height saturates while the crystal deposit thickens logarithmically. This unified description makes it possible to follow the macroscopic kinetics of salt growth on a free surface from its nucleation to saturation. In addition, we complement this macroscopic analysis with numerical simulations that shed light on the evolution of the microscopic crystal structure under varying external conditions (humidity and temperature).

2026-04-07T12:24:14Z Baptiste Guilleminot Élodie Harlé Timothée Herbeau http://arxiv.org/abs/2606.19418v2 2026-09-09T11:01:09Z

Predicting detailed atomistic structures of self-assembling systems remains a challenge for all-atom molecular dynamics simulations. Replica exchange with solute tempering (REST) has been used to study those systems by accelerating all monomers in a global and uniform manner. While such a global approach can in principle predict any morphology of the system, it has computational drawbacks such as inefficient replica traversal due to order-disorder transitions and the growing number of replicas with system size. To address these issues, here we propose an alternative, stepwise construction approach to modeling supramolecular polymers under the assumption of one-dimensional polymerization. Specifically, we generate polymer structures by adding new monomers one by one to the system and applying REST to the new monomers to find their optimal binding positions based on an energy-based scoring function. The monomer addition and enhanced sampling are repeated sequentially until a polymer of desired length is obtained. We test the above procedure using a model supramolecular polymer in explicit solvent, and show that it can generate a polymer structure with characteristic H-bonding patterns at reduced computational costs, while also improving the efficiency of replica traversal significantly. We thus expect that the sequential REST will be useful for modeling supramolecular polymers, particularly for cases where global REST simulations are too demanding computationally.

2026-06-17T17:54:38Z 13 pages, 9 figures Hadi H. Arefi Takeshi Yamamoto http://arxiv.org/abs/2609.10014v1 2026-09-09T10:45:30Z

We studied the 2-Temperature induced phase separation (2-TIPS) in a system of soft repulsive sphe rocylinders (SRS), confined on the surface of a sphere. We used two different anchoring conditions for the SRS on the spherical surface- free and tangential. For the free anchoring, increasing either the packing fraction or the rod aspect ratio suppresses phase separation between the active and passive subsystems, and the system corresponds to a dense-dilute phase co-existence. These phenomena can be explained via the trapping effect and are emergent due to the confinement. For the tangential anchoring, the system phase separates from its initial isotropic state into a locally ordered dense region and a disordered dilute region. Our work provides useful insights into phase separation in binary mixtures under spherical confinement.

2026-09-09T10:45:30Z 10 pages, 7 figures, submitted to Soft Matter for a themed collection Jaydeep Mandal Chandan Dasgupta Prabal K. Maiti http://arxiv.org/abs/2609.09936v1 2026-09-09T09:27:17Z

Self-assembly of hard particles with diverse shapes gives rise to a rich variety of structures through excluded-volume constraints alone. Here we show that even a minimal system of three hard squares confined in a two-dimensional periodic box exhibits nontrivial configurational behavior relevant to structure selection. As the packing fraction increases, radial distribution functions obtained from Markov-chain Monte Carlo and uniform non-overlapping insertion sampling agree at low densities, deviate markedly over an intermediate range, and converge again at higher densities. Pressure measurements provide strong numerical evidence that the discrepancy originates from the separation of the allowed configurational space into two disconnected regions above a characteristic density. We identify the separation density as $φ_{\rm sep}=3/5$, construct explicit overlap-free transition pathways connecting the two regions immediately below it, and quantify their relative configurational-space volumes. At higher packing fractions, an approximately L-shaped arrangement of the particle centers becomes strongly favored over a staggered one, revealing a structural motif characteristic of tetratic and square-lattice ordering in larger hard-square systems. These results show that excluded-volume geometry can govern both configurational connectivity and local structure selection even in a three-particle system, revealing how signatures of many-particle self-assembly can already emerge in the few-particle limit.

2026-09-09T09:27:17Z 6 pages, 4 figures and Supplemental Material Yuheng Yang Meng Xiao Duanduan Wan