https://arxiv.org/api/LydEg5o5PTGiTwsqO8npCsxEq7s 2026-06-10T11:58:45Z 45264 135 15 http://arxiv.org/abs/2606.00470v1 2026-05-30T01:28:24Z

A passive monolithic compliant grasping mechanism that works based on the eversion of an elastically deformable bistable shell is conceptualized. It comprises grasping arms made of beam segments that work in conjunction with the everting shell. The grasper is capable of picking up a stiff object of any shape up to a maximum size and weight. The bistable shell everts upon contact with the object to enable the grasping arms envelop the object forming an enclosure. The mechanism then stays in that configuration until it is actuated again to turn the shell back to its original configuration and thereby opening the enclosure to release the object. The stiffness of the arms decides the payload of the mechanism. The size of the arms decides the largest object that can be grasped and held. The arms have distributed compliance so that they can conform to the shape of the object without applying undue force on it.

2026-05-30T01:28:24Z Mythra V. S. Balakuntala Safvan Palathingal G. K. Ananthasuresh 10.1007/978-981-15-4477-4_43 http://arxiv.org/abs/2606.00434v1 2026-05-29T23:48:10Z

The behaviour of biological cells depends on the mechanical properties, such as Elastic Modulus and Poisson's ratio, of the substrate they adhere to. Tunable materials such as polyacrylamide gels and hydrogels were previously used as substrates to understand this dependence. However, these substrates do not facilitate changing their elastic properties in situ while cells are growing on them. This work presents an alternate approach that enables this--substrates based on tunable compliant micro mechanisms. In particular, the mechanism proposed here has an invertible Poisson's ratio effect. In the first configuration, the effect is positive, and in the second, it is negative, with any desired magnitude. We achieve this by changing the stiffness between two internal points of a mechanism with the shape of a re-entrant structure. An increase in stiffness causes the direction of deformation along the lateral axis to reverse for a given reference load along the horizontal axis. We derive analytical expressions that relate the geometric parameters to the ratio of input and output displacements for both mechanism configurations. The analytical modelling is verified with finite element analysis and experiments on mesoscale design prototypes of both configurations.

2026-05-29T23:48:10Z Manu Sebastian Sreenath Balakrishnan Safvan Palathingal 10.1115/DETC2023-110544 http://arxiv.org/abs/2606.00319v1 2026-05-29T19:49:44Z

The impact of polymer solution droplets on granular beds is relevant to powder processing, binder jetting additive manufacturing, and environmental applications involving erosion control or spray deposition, yet most controlled studies of drop--grain interactions have focused on Newtonian liquids. In this study, we experimentally investigate the impact of viscoelastic polyethylene oxide (PEO) droplets on a dry granular bed and compare the resulting cratering dynamics with those of Newtonian liquids over a wide range of impact energies and Ohnesorge numbers. Crater morphology changes with impact energy, and this evolution occurs at lower energies for drops of polymer solution, consistent with their distinct liquid--grain interactions during impact. The crater diameter exhibits two distinct regimes: a low-energy plateau and a power-law growth at higher impact energies. We identify the transition between these regimes and show that, although the plateau size and the power law remain nearly unchanged, viscoelastic droplets reach the transition at lower impact energy than Newtonian droplets. This suggests that viscoelasticity modifies how the impact energy is partitioned between droplet deformation and dissipation in the granular bed.

2026-05-29T19:49:44Z Jooyeon Park Theophile Meiller Sreeram Rajesh Alban Sauret http://arxiv.org/abs/2605.31542v1 2026-05-29T16:57:33Z

We study the conditions for a three-phase contact line to return to a previous position. We drive a water-air-glass contact line between two horizontal plates, by slowly adding and removing water with a constant volume amplitude. For the first several cycles, the contact line ends each cycle with a different shape, in contrast with previously published work. Eventually the shapes begin to repeat, and the system has memory: a cycle with a smaller amplitude ends in a different shape, but even one cycle at the original amplitude recovers the steady-state shape. After a cycle at a larger amplitude, the steady-state shape is erased. We find that our tight control of the enclosed volume creates a global interaction, wherein only the least stable part of the contact line can move. Using theory and minimal models, we show that this interaction gives rise to the transient behaviors. Our study sheds light on the origins of reversibility and memory in a system where neither is guaranteed, and shows that the physics of contact line motion changes in a confined environment.

2026-05-29T16:57:33Z 7 pages, 6 figures Ashbell Abraham Audrey Profeta Jeanette Smit Esmeralda Orozco Charity Lizardo Dani Medina Aidan McGuckin Bri Kroger Shae Cole Nathan C. Keim http://arxiv.org/abs/2605.31532v1 2026-05-29T16:45:51Z

Constitutive laws for inelastic materials must satisfy strict thermodynamic admissibility requirements, yet current data-driven approaches sacrifice interpretability, even when formal guarantees are provided by physics-encoded architectures. We propose a symbolic regression framework for the data-driven discovery of dissipation potentials governing the evolution of internal variables within the Generalized Standard Materials (GSM) formalism. Starting from the Clausius--Duhem inequality, we enforce the thermodynamic requirements, convexity and non-negativity, that the dual dissipation potential must satisfy to guarantee non-negative mechanical dissipation. These requirements are formulated in the general subdifferential setting, encompassing rate-dependent (viscoelastic) and viscoplastic dissipative mechanisms, including potentials with genuine elastic domains, within a unified framework. Candidate potentials are generated by a composition-extended convexity-preserving grammar that guarantees thermodynamic admissibility \emph{by construction}. The framework is validated on synthetic datasets spanning Newtonian, power-law, and Bingham viscoplastic ground truths under process and measurement noise, and on experimental oscillatory shear measurements of a synthetic elastomer across multiple strain amplitudes and frequencies, where the discovered potentials reproduce the amplitude-dependent softening of the dynamic moduli and outperform a calibrated linear Zener baseline.

2026-05-29T16:45:51Z Federico Califano Jacopo Ciambella http://arxiv.org/abs/2510.14769v2 2026-05-29T16:18:03Z

Solid interfaces resist sliding up to a threshold shear force, called static friction, beyond which they start moving and their resistance drops to the kinetic friction. Static friction at rough interfaces has long been described empirically using system-specific coefficients tabulated in engineering handbooks. Here, through nanometer-resolution sliding experiments, we show that it is set by a friction overshoot during the onset of sliding. We demonstrate that this overshoot originates from the collective configurational evolution of surface asperities under shear, and derive a minimal differential equation governing this evolution. Our theory predicts that such overshoots generically emerge when an athermal frictional system evolves smoothly toward a unique steady-state kinetic friction. These results show that static friction is not an intrinsic material property, but an emergent consequence of collective asperity dynamics.

2025-10-16T15:05:49Z Kasra Farain Daniel Bonn http://arxiv.org/abs/2605.31479v1 2026-05-29T16:06:56Z

We address the effective nonequilibrium drag force field that emerges from the microscopic interparticle interactions in steady states of counterdriven binary fluid mixtures. Using power functional scaling arguments for adaptive Brownian dynamics computer simulation results, we establish quantitatively the crossover between near-equilibrium linear response and far-nonequilibrium square root asymptotics. An algebraic expression captures both limiting cases and remains applicable in the crossover regime. Using simulation results as benchmarks, we verify that a local power functional approximation based on the scaling law reproduces the spatial nonequilibrium structure formation in inhomogenously driven systems. The crossover scenario transcends dynamical density functional theory and it sheds light on general nonequilibrium scaling of driven fluids.

2026-05-29T16:06:56Z 7 pages, 3 figures Jonas Köglmayr Florian Sammüller Matthias Schmidt http://arxiv.org/abs/2605.31462v1 2026-05-29T15:52:28Z

The stretching behavior of linear macromolecules undergoing conformational transitions is investigated. An exact solution is provided for a two-state system within the elastic freely jointed chain model. This minimal framework contains the smallest set of parameters required to describe such transitions: two Kuhn lengths, two elastic force constants, a free energy difference between both states and a nearest-neighbor interaction energy accounting for cooperativity. Explicit analytical expressions are derived for the chain extension and the probabilities of each state as functions of the applied force.The approach accurately reproduces the experimental force-extension curves of poly(ethylene-glycol) (PEG) and hyaluronic acid (HA), revealing no cooperativity for PEG and negative cooperativity for HA. It also describes the B-DNA to S-DNA conformational transition, a process that exhibits positive cooperativity.We analyze the mathematical conditions required for a transition and identify two fundamental driving mechanisms: differences in Kuhn lengths and differences in force constants.Extensions of the model to systems with more than two conformational states per Kuhn segment are also discussed. The results presented here apply equally to transitions that are intrinsic to the macromolecular structure or induced by ligand-receptor interactions, unifying both cases within a single thermodynamically consistent framework.

2026-05-29T15:52:28Z Javier Orradre Pablo M. Blanco Sergio Madurga Marina I. Giannotti Francesc Mas Josep L. Garcés http://arxiv.org/abs/2510.03140v2 2026-05-29T15:13:54Z

Understanding solution-phase aggregation and dynamics in complex fluids is critical for material processing, yet widely used dynamic light scattering (DLS) fails for strongly attenuating systems such as conjugated polymers. We use X-ray photon correlation spectroscopy (XPCS) to probe the dynamics of a polymer, PM7, in toluene, revealing unexpected oscillations in the autocorrelation function that show vertical flow during measurement. Despite the relatively low X-ray absorption, measured flow velocities scale with X-ray beam power and suggest convective transport. Our analyses reveal both mobile and static scatterers that together produce oscillatory, heterodyne features in the measured correlation functions. Finite element simulations predict flow velocities much larger than observed, suggesting that entanglements of the aggregates slow their motion. These results provide a direct measurement of ultra-slow convection and highlight the need to explicitly account for even modest beam heating in interpreting XPCS results. Moreover, the observation of distinct scatterer populations underscores the structural complexity of conjugated polymer solutions.

2025-10-03T16:10:30Z Newton (2026) Thomas P. Chaney Samuel D. Marks Dylan M. Ladd Andrei Fluerasu Federico Zontone Yuriy Chushkin Sebastian Frücht Dina Sheyfer Kelsey Levine Amnahir E. Peña-Alcántara Hans-Georg Steinrück Michael F. Toney 10.1016/j.newton.2026.100464 http://arxiv.org/abs/2605.31355v1 2026-05-29T14:30:27Z

Active fluids generate motion and stress internally, but in living systems this activity is often regulated by environmental fields that the organisms consume or produce. Here we show that oxygen gradients organise and destabilise dense suspensions of the flagellated microswimmer \textit{Euglena gracilis}. In circular chambers open to air at the periphery, oxygen exchange and cellular consumption generate a radial chemical gradient. An initially homogeneous suspension spontaneously forms a dense cellular ring through oxygen-dependent motility and bidirectional oxytaxis. The ring then develops collective rotation and destabilises into a long-lived corona of protrusions. We reproduce this sequence with an oxygen-coupled polar active-fluid model in which oxygen controls both the direction and speed of cell motion, while dipolar active stresses drive the instability of the dense interface. The simulations show that oxygen taxis creates the annular active interface, but the subsequent corona is an activity-driven interfacial instability. Our results reveal how a self-generated chemical gradient can position and activate a living fluid, providing a route to environmental control of active-matter flows and interfaces.

2026-05-29T14:30:27Z Azam Gholami Sangram Gore Sai V. R. Ambadipudi Iraj Gholami Albert J. Bae http://arxiv.org/abs/2603.17642v2 2026-05-29T14:16:35Z

We present experiments on the collective dynamics of macroscopic photoactive self-propelled particles subjected to spatiotemporally varying excitation. The particles move within an arena divided into two regions with different illumination intensities, creating alternating bright (more active) and dark (less active) zones. Under such conditions, the system exhibits a robust migration from the more active region toward the less active region, demonstrating a strong response to external modulation. This response depends sensitively on the frequency of the illumination pattern: at low frequencies, particles follow the changing landscape, whereas at higher frequencies, the response diminishes. We show that this behavior arises from the interplay between the imposed excitation and the intrinsic dynamics of the particle clusters that form spontaneously. To explain these features, we extend a kinetic model previously introduced in Lévay et al. [Phys. Rev. Lett. 135, 098301 (2025)], hence revealing the most important parameters governing the transition between the responsive and unresponsive regimes.

2026-03-18T12:03:30Z Physical Review E 113, 055423 (2026) Sára Lévay Axel Katona Raúl Cruz Hidalgo Iker Zuriguel 10.1103/q1s2-xw9x http://arxiv.org/abs/2605.31297v1 2026-05-29T13:33:32Z

The generalized Langevin equation (GLE) is widely used to model complex soft-matter systems, including biomolecular dynamics, by incorporating memory effects and colored noise into coarse-grained descriptions. However, recent results suggest that combining memory with non-linear forces, ubiquitous in soft matter, introduces fundamental analytical inconsistencies. Here, using a simplified model, we investigate the practical numerical consequences of these analytical results. We show that non-linear forces generate cross-correlations with the noise, modifying the fluctuation-dissipation theorem and rendering the noise position-dependent and irreversible. This implies that the commonly assumed reversible Gaussian noise in GLE simulations fails to capture essential features of the microscopic fluctuations. For weak non-linearities, these issues can be partially resolved either by using an iterative optimization of memory or by using microscopically consistent noise, which unexpectedly synchronizes GLE trajectories with the underlying microscopic dynamics. For stronger non-linearities like high barriers or shoulders in the external potential, however, iterative reconstruction fails and we observe desynchronization, indicating that the non-linear GLE no longer correctly reproduces the microscopic dynamics. Our results show in which situations non-linear GLEs can be accurately applied and when they fail, thus providing practical guidance for their application to coarse-grain soft-matter systems.

2026-05-29T13:33:32Z Bernd Jung Gerhard Jung http://arxiv.org/abs/2605.31258v1 2026-05-29T12:53:59Z

Elasto-capillarity of a droplet wetting an elastic sheet provides an interesting system, both for fundamental and applied research. The droplet sinks into the sheet and assumes the shape of a lens. To determine the equilibrium shape in simulations, we formulate a boundary element method (BEM) extending our earlier approaches, and apply the BEM to three specific protocols for the boundary conditions of the sheet. For a clamped elastic sheet, we use various morphological metrics to demonstrate that the lens shape crucially depends on the sheet thickness. Stretching the sheet isotropically, allows for an additional control parameter to influence the droplet shape and the tension in the sheet, which we quantify by radial profiles of the azimuthal and radial elastic stresses. We further demonstrate how the focal length of a liquid lens can be tuned by varying the applied tension. Finally, stretching the sheet along one direction, elongates the droplet, and the sheet shows folds and dimples.

2026-05-29T12:53:59Z 18 pages, 9 figures Salik Sultan Josua Grawitter Gonçalo C. Antunes Holger Stark http://arxiv.org/abs/2605.31078v1 2026-05-29T09:45:59Z

Inertia effects in the Langevin dynamics of a lopsided elastic dumbbell are investigated using exponential-time-differencing (ETD) integrators for the corresponding stiff stochastic equations at small mass limit. Starting from the bead-level underdamped Langevin model, we formulate the dynamics in modal coordinates, highlighting two distinct friction scales: an additive friction $ζ_{\rm trans}=ζ_1+ζ_2$ controlling translation ($ζ_i, i=1,2$ are the friction factor on bead $i$), and an effective internal friction $1/ζ_{\rm eff}=1/ζ_1+1/ζ_2$ controlling configurational relaxation, with relaxation time $τ_R=ζ_{\rm eff}/H$ for a Hookean spring of stiffness $H$. We benchmark ETD against Euler--Maruyama and overdamped Brownian dynamics using equilibrium statistics, time-domain autocorrelations, and frequency-domain power spectra of the end-to-end vector. When time is rescaled by $τ_R$, configurational and orientational relaxation curves collapse across asymmetry ratios, showing that the dominant long-time structural dynamics remains close to the overdamped description. Inertial signatures are instead confined to short-time transients, high-frequency modifications of the configurational spectrum, and a transient coupling between translational and internal modes. This study provides a practical and accurate route for lopsided dumbbells across overdamped and weakly underdamped regimes, and clarify how mass and friction asymmetry affect the translational and internal dynamics.

2026-05-29T09:45:59Z Transport Phenomena 1(2) 2026 Lei Song Dingyi Pan Nhan Phan-Thien 10.1515/tp-2026-0048 http://arxiv.org/abs/2511.06807v2 2026-05-29T07:49:10Z

Friction is fundamental to mechanical stability across scales, from geological faults and architectural structures to granular materials and animal feet. We study the mechanical stability of a minimal friction-stabilized structure composed of three cylindrical particles arranged in a triangular stack on a floor under gravity. We analyze the yield force, defined as the threshold compressive force applied quasi-statically from above at which the structure collapses due to sliding at the floor contact. Using singular perturbation analysis, we derive an expression which quantitatively predicts the yield force as a function of the static friction coefficient and a small dimensionless parameter $ε$ characterizing elastic deformation.

2025-11-10T07:49:44Z Main: 7 pages, 4 figures. SI: 4 pages, 4 figures Ryudo Suzuki Takashi Matsushima Tetsuo Yamaguchi Marie Tani Shin-ichi Sasa