https://arxiv.org/api/Qde7fvtXpZGuCGUDtiLeoEusOCE2026-06-10T11:08:29Z4526412015http://arxiv.org/abs/2606.01752v1Stress relaxation in fiber networks via force-dependent stochastic severing2026-06-01T06:13:56ZFiber networks contribute to the mechanical stability of various biological systems, from cells to tissues. Such systems have been modeled by networks of springs or fibers that exhibit rigidity transitions as a function of either connectivity or applied strain. For a fiber network under constant applied strain, severing can reduce the connectivity and destabilize an initially rigid structure. Here, we investigate stress relaxation in spring and fiber networks in the presence of stochastic, force-dependent severing. A computational model to predict stress relaxation with mechanochemical feedback of stress on severing is developed. We also examine the effects of severing on the network topology and onset of rigidity transition. Using 2D triangular lattice-based computer simulations, we explore different limits of the feedback and demonstrate the shift in the onset of rigidity depending on the limit. The limit of tension-suppressed severing delays stress relaxation and shifts the transition into the bending-dominated regime to lower-than-expected connectivity. In contrast, tension-enhanced severing accelerates relaxation and shifts the transition to higher-than-expected connectivity. It is also found that the magnitude of this shift depends on the applied shear strain and the strength of the feedback. Our theoretical approach clarifies some microscopic aspects of these phenomena. Understanding the impact of such feedback mechanisms can provide valuable insights into designing systems by tuning the feedback to the desired response.2026-06-01T06:13:56ZPrathamesh KulkarniAnatoly B. KolomeiskyFred C. MacKintoshhttp://arxiv.org/abs/2606.01593v1Resonant Coupling and the Non-Phononic Flat Band in Amorphous Solids2026-06-01T02:42:45ZRecent experiments and simulations provide compelling evidence for the emergence of a non-phononic flat band in the dynamical structure factor of two- and three-dimensional amorphous solids. This feature has been suggested to be connected to the excess in the reduced vibrational density of states of glasses, commonly known as the boson peak, and displays several apparently universal characteristics. First, it is nearly dispersionless, with an energy close to the boson-peak frequency. Second, its intensity is negligible below a critical wave vector of the order of the first diffraction peak. Third, its reduced intensity exhibits a strong correlation with the static structure factor. Here, we revisit the resonant-coupling model, a single-mode harmonic realization of the soft-potential scenario in which acoustic phonons interact with single frequency quasi-localized vibrations. We show that this minimal framework naturally reproduces the main features of the observed flat band and clarifies its connection to the boson peak.2026-06-01T02:42:45Zv1: comments welcomeMatteo BaggioliBingyu Cuihttp://arxiv.org/abs/2602.08049v4Continuum-statistical dynamics of colloidal suspensions under kinematic reversibility2026-05-31T20:30:52ZWe present a linear response theory that establishes the continuum-mechanical origin of Onsager reciprocity in colloidal motion. By decoupling hydrostatic and hydrodynamic stress, we show that Onsager reciprocal relations emerge when the Lorentz reciprocal theorem is applied under kinematic reversibility to the auxiliary flow problem of colloidal sedimentation. Our framework applies to suspensions containing multiple species of microparticles and derives all non-equilibrium contributions to colloidal diffusion from a single application of the Lorentz reciprocal theorem, irrespective of whether a slip or no-slip hydrodynamic boundary condition is imposed at the colloidal surface. Furthermore, a boundary-layer treatment is only assumed for ciliary motion, while the hydrostatic forces giving rise to non-equilibrium thermodynamic motion are fully resolved beyond the boundary-layer approximation. In particular, our framework is consistent with classical osmosis through a semi-permeable membrane, where fluid flow occurs without interfacial potential interactions. For diffusiophoresis due to volume exclusion of a solute, our results therefore predict colloidal motion towards higher solute concentration for thin excluded-volume layers, whereas the opposite trend is recovered for longer-ranged, moderately repulsive potentials.2026-02-08T16:36:16ZJerome Burelbachhttp://arxiv.org/abs/2606.01327v1Particle Force-Based Continuum Model for Multicomponent Size Segregating Mixtures2026-05-31T16:24:29ZWe investigate size difference driven segregation in dense granular flows of multicomponent mixtures down a periodic chute using continuum model and Discrete Element Method (DEM) simulations. A previously developed particle force-based segregation model for binary mixtures is systematically extended to mixtures comprising three or more particle species differing in size. The generalized model accounts for inter-species interactions by computing the net force on each component in the presence of all others, without relying on empirical percolation velocity. This segregation model is coupled with a mixture rheology model and incorporated into the species transport and momentum balance equations to develop a continuum model that predicts the spatial and temporal evolution of species concentration and velocity fields. The continuum model predictions are found to be in agreement with DEM simulation data for ternary and quaternary mixtures over a wide range of mixture compositions and chute inclinations at moderate size ratios for well-mixed and small-near-base configurations. For larger size ratios, the one dimensional model predictions capture the qualitative segregation trend while showing relatively larger quantitative differences from DEM data. For an initial configuration, having large particles near base and small particles near the free surface, a Rayleigh-Taylor like instability at early times is observed. Due to the presence of this instability, two dimensional evolution of the species concentration fields is present for initial part of the flow. Predictions of such features requires the extension of the one dimensional continuum model to two dimensions.2026-05-31T16:24:29ZSoniya KumawatAnurag Tripathihttp://arxiv.org/abs/2606.01251v1Polymer-Regulated Freezing of Water Droplets Revealed by Synchrotron X-ray Imaging and Raman Spectroscopy2026-05-31T14:10:35ZAdding a polymer to a sessile water droplet not only lowers its freezing point but also suppresses the tip singularity that forms during its freezing on cold substrates. Here, we employ synchrotron X-ray and Raman imaging to elucidate the spatiotemporal mechanism underlying tip suppression in an aqueous polyvinyl alcohol (PVA) solution, a model polymer solution. As the polymer concentration increases, we observe slower propagation of the freezing front, reduced bubble entrapment, and a progressively more rounded apex across the volumes and molecular weights examined. X-ray tomography reveals that frozen PVA droplets retain low X-ray transmittance domains in their interiors and at the surface, and Raman spectral mapping confirms that these domains correspond to PVA-enriched regions, providing direct evidence of freeze-induced polymer segregation. These findings indicate that PVA is redistributed heterogeneously during water solidification rather than shifting bulk properties homogeneously, providing a spatially resolved framework for interpreting the observed tip blunting and the suppression of discrete bubble entrapment. Our work identifies freeze-induced polymer segregation as a pathway by which a dissolved polymer regulates both the external shape and the internal structure of a freezing droplet, and these findings shed light on potential applications in freezing-based processes such as freeze-casting and cryopreservation.2026-05-31T14:10:35ZHyeonjun AnBomi KimJae Kwan ImMin Woo KimSeob-Gu KimJae-Hong LimKitae KimJoonwoo Jeonghttp://arxiv.org/abs/2603.23856v2A simple model for conserved intracellular dynamics exhibits multiscale pattern formation, traveling protein domains and arrested coarsening of lipid domains2026-05-31T13:18:26ZWe model the spatiotemporal dynamics of cellular protein concentrations relevant to cell polarity near membranes composed of different lipids. Therefore, we consider a three-variable continuum model for membrane-bound protein, cytosolic protein, and the local composition of a binary lipid membrane. The model contains two globally conserved quantities: the total protein content and the average fractions of the two lipid species. It combines a conserved reaction-diffusion model for the protein dynamics, undergoing an active phase separation, with a Cahn-Hilliard equation for lipid demixing. Linear stability analysis of the homogeneous steady state and direct numerical simulations show that the lipid dynamics undergoes classical phase separation, whereas the protein dynamics exhibits oscillatory phase separation for intermediate total protein contents, associated with a long-wavelength instability and traveling domains. In parameter regions where both instabilities are present, we find multiscale patterns with larger-scale traveling and rotating protein domains coexisting with smaller-scale stationary lipid domains. In this regime, traveling protein domains coexist with arrested coarsening of stationary lipid domains above a critical coupling. We further show that the main instabilities and phase diagram are well captured by an extension of a recently proposed conserved FitzHugh-Nagumo model for non-reciprocal pattern formation. The extended model consists of two non-reciprocally coupled Cahn-Hilliard equations with different interface tensions, reflecting the distinct physical properties of lipids and proteins. This also explains the observed asymmetry between static lipid patterns and traveling protein patterns.2026-03-25T02:34:18Zadded figure 3 and reworked introduction for clarityBenjamin WinklerSergio AlonsoMarkus Bärhttp://arxiv.org/abs/2510.15856v3Shape matters: Body dynamics underlies efficient jumping2026-05-31T11:20:41ZMany small animals, particularly insects, use power-amplification to generate rapid motions, such as jumping, that would otherwise be impossible given the standard power density of muscle. A common framework for understanding this power amplification is Latch-Mediated, Spring Actuated (LaMSA) jumping, in which a spring is slowly compressed, latched in its compressed state and the latch released to allow jumping. Motivated by the jumps of certain insect larvae, we consider an external latching mechanism via adhesion to a substrate that is quickly released for jumping. We show that the rate at which this adhesion is lost is crucial in determining the efficiency of jumping and, indeed, whether jumping occurs at all. As well as showing how release rate should be chosen to facilitate optimal jumping, our analysis underscores the importance of the interaction between latch-release dynamics and the elastic deformation of the jumper for power amplification, thereby providing new insight into the post-latch control of jumping.2025-10-17T17:50:26Z6 pages main text + Supplementary InformationMarc SuñéLucas SelvaCristóbal ArratiaJohn S. WettlauferDominic Vellahttp://arxiv.org/abs/2606.04012v1Deformable Charge Dynamics in Biological Environments: An Extended Structural Dynamics Foundation for Biological Electrostatics2026-05-31T05:30:52ZThe point-charge approximation is one of the most successful idealizations in molecular biophysics, but it becomes strained in strong fields, confined geometries, and crowded aqueous environments. We develop a minimal Extended Structural Dynamics (ESD) model in which charged entities are treated as finite, deformable objects with an internal breathing mode rather than as structureless points. Starting from a Hamiltonian description and a controlled coarse-graining procedure, we derive an effective generalized Langevin equation for the center-of-mass motion. The reduced dynamics contain a memory kernel with three physically distinct contributions: finite-size causal delay, inertial deformation, and crowding-induced deformation. The derivation rests on explicit assumptions of small deformation, local dielectric screening, one dominant internal mode, and adiabatic elimination of the fast structural coordinate. Parameters are determined by independently measurable inputs -- ionic radius, charge, mass, and the high-frequency dielectric constant of water -- with one exception: the dimensionless coupling lambda governing crowding-induced deformation, discussed in detail in the paper. Two primary predictions follow. First, transport through confined geometries should show dynamical deviations from point-charge baselines scaling with ionic deformability, beyond static potential-of-mean-force predictions. Second, polarization response should preserve ionic-radius ordering across alkali ions. Two secondary consequences are identified: a field-dependent effective charge radius and a deformation-dependent correction to near-surface mobility. Amplification of these effects in confined settings is treated as a plausible extension rather than a derived result. The framework recovers standard electrostatic models as limiting cases.2026-05-31T05:30:52ZPart of a series on Extended Structural Dynamics. Companion papers: arXiv:2505.09650, arXiv:2603.02249, arXiv:2603.11064, arXiv:2605.16337. Also, the ESD framework has been peer reviewed in the context of plasma transport (BarAvi 2026c, Transport Phenomena, De Gruyter Brill, in press)Patrick BarAvihttp://arxiv.org/abs/2606.00921v1Solubility enhanced surfactant-induced flow in air-liquid-air sheets2026-05-30T23:07:55ZLiquid interfaces appear throughout nature and engineering and are typically contaminated by surface active agents (surfactants), which are characterized by a wide range of solubility. We demonstrate that solubility enhances by an order of magnitude surfactant-induced flow in air-liquid-air films, in contrast to previously studied geometries where solubility dampens the flow. The enhancement is described by a single parameter comparing the depletion length to the film thickness. Our experiments are well described by an asymptotic theory of the Navier-Stokes equations with surfactant kinetics.2026-05-30T23:07:55ZJun EshimaTristan AuréganEmmanuel VillermauxHoward A. StoneLuc Deikehttp://arxiv.org/abs/2606.00882v1High Resolution Study of the 2D ANNNI Model Using a Two-replica Cluster Algorithm and Population Annealing2026-05-30T20:32:54ZThe axial next-nearest-neighbor Ising (ANNNI) model in two dimensions is studied using population annealing combined with a two-replica cluster algorithm. We are able to fully resolve the sequence of sharp specific heat peaks that characterize the finite-size incommensurate floating phase. We also show that the two-replica cluster algorithm is much more effective in equilibrating the system than either single-replica cluster methods or the Metropolis algorithm when these are combined with population annealing. We argue that effectiveness of the new algorithm is due to its ability to move groups of defect lines between replicas combined with resampling in population annealing, which removes replicas from the population that have larger numbers of defect lines.2026-05-30T20:32:54Z13 pages, 14 figuresShane KeiserJon Machtahttp://arxiv.org/abs/2606.00659v1Tensor gradient flow with quasi-entropy for smectic liquid crystals and discretizations keeping coupled physical constraints2026-05-30T10:21:16ZA gradient flow for the concentration and a $2\times 2$ tensor is constructed to describe smectic liquid crystals. The free energy consists of the entropy term and interaction term involving squared second order spatial derivatives. The entropy term incorporates the concentration in the quasi-entropy originally proposed for the tensor only, which is a strictly convex and lower semicontinuous function imposing coupled constraints between the concentration and the tensor. An evolution equation for the boundary normal derivative of the concentration is proposed in addition to the equations for the concentration and the tensor, giving an energy dissipation system. Numerical schemes are designed with emphases on using the entropy term to keep the coupled constraints, and the discretization of the boundary normal derivatives satisfying summation by parts. Existence, uniqueness, energy dissipation and error estimates are established. Numerical results indicate the efficiency and robustness of the scheme. Configurations of defects different from other layer structures are observed.2026-05-30T10:21:16Z33 pages, 8 figuresJie XuXiaomei Yaohttp://arxiv.org/abs/2605.30185v2Theory of distribution skewness effect on polydisperse random close packing2026-05-30T09:28:32ZWe investigate the random close packing density, $φ_\textrm{RCP}$, of polydisperse hard sphere systems using a theoretical framework based on the equilibrium model of crowding. We derive a closed-form solution for $φ_\textrm{RCP}$ in terms of the moments of the diameter distribution, enabling an analytical exploration of the effects of polydispersity ($δ$) and skewness ($S$) on packing density. For a binary mixture, it is possible to explore a broader range of dependence of $φ_\textrm{RCP}$ on $δ$ for a given $S$ or on $S$ for a given $δ$. We show that the dependencies of $φ_\textrm{RCP}$ on skewness for a variety of continuous distributions collapse onto a theoretical master curve obtained for the binary mixture case. By correcting the theory so that it obeys known exact limiting behaviours for extreme size asymmetry, our analytical predictions not only agree with previously obtained numerical results, but also predict previously unexplored regions of the $φ_\textrm{RCP}$ parameter space.2026-05-28T16:30:20ZMissing refs. addedVinay VaibhavCarmine AnzivinoAlessio Zacconehttp://arxiv.org/abs/2606.00626v1Sliding contact creates universal self-affine fractal surfaces2026-05-30T09:00:25ZSurface roughness evolves during sliding, a process known as run-in, and the resulting topography controls friction, leakage, and failure from machines to geological faults. Yet the physical rule selecting this state remains unclear. We show that metals, rocks, and glasses develop universal self-similar roughness at short wavelengths, while retaining a material-dependent roll-off. A two-process model explains this behavior: junction formation and rupture drive universal roughening, whereas larger-scale deformation and/or fracture limit its growth.2026-05-30T09:00:25ZRuibin XuHaohao RenAdriane ClercGuilhem MollonWenbo ShengFeng ZhouB. N. J. Perssonhttp://arxiv.org/abs/2606.00560v1Velocity Resetting of Inertial Run-and-Tumble Particles in Non-Newtonian Media: Velocity Distribution, Diffusion and First-Passage Time2026-05-30T06:23:51ZWe study the dynamics of an athermal inertial run-and-tumble particle moving through a non-Newtonian medium in $d=1$, where the particle's velocity $v$ is reset to zero at a constant rate $r$. The drag force from the non-Newtonian medium is represented by a nonlinear velocity-dependent function $g(v)$. The run-and-tumble dynamics is modeled by a symmetric dichotomous noise with strength $Σ$ and flipping rate $λ$. We begin with the Fokker-Planck (FP) equation for the velocity distribution $P(v,t)$ of the particle. In the presence of resetting, however, the FP equation does not yield a closed-form solution even in the steady state. We therefore compute the steady-state velocity distribution $P_s(v)$ directly from particle trajectories and compare it with the numerical solution of the FP equation, finding good agreement between the two approaches. For sufficiently large $r$, $P_s(v)$ shows a cusp-like singularity at $v=0$ and the particles display diffusive motion at long times. The effective diffusion coefficient $D_{\mathrm{eff}}$ decays as $r^{-2}$ in the large-$r$ regime. These results hold irrespective of the specific form of $g(v)$ and the values of $λ$ and $Σ$. However, the mean first-passage time exhibits a strong dependence on the nature of the medium as the resetting rate $r$ is varied. In shear-thickening media, there exists an optimal resetting rate that minimizes the time required to reach the target velocity $v_t$. In contrast, no such optimal resetting rate is observed in shear-thinning media.2026-05-30T06:23:51Z19 Pages, 6 Figures, Accepted in Physics of FluidsSubhanker HowladerSayantan MondalPrasenjit Dashttp://arxiv.org/abs/2603.02410v2Invariant Curves and the Variational Structure in Tubular Origami Dynamical Systems2026-05-30T05:19:30ZWe present a theoretical and numerical dynamical-systems analysis of tubular origami tessellations by identifying the inverse module number, $N^{-1}$, as a perturbation parameter within the framework of Kolmogorov--Arnold--Moser (KAM) theory. In the large-module limit ($N \to \infty$), we show that the conservative dynamics formally converges to an integrable map with a variational structure, whose generating function corresponds to the total discrete mean curvature. From the viewpoint of KAM theory, nonresonant invariant curves of the integrable limit are expected to persist for sufficiently large $N$. Consistent with this expectation, numerical computations with increasing $N$ show that large regions of the phase space are filled with structures that appear to be invariant curves. By adjusting mountain-valley fold assignments and fold lengths, the system can be transformed into a nontwist map that exhibits multiple zero frequencies. The frequency profile in the integrable limit and the persistence of invariant curves allow us to control the number and arrangement of stable folding regions appearing as coexisting elliptic islands. These islands provide a phase-space interpretation of distinct folding modes, separated by invariant curves that act as geometric barriers to continuous deformation and obstruct transitions without self-intersection. Finally, we analyze the expanding and contracting dynamics of the origami structure within the framework of conformally symplectic systems. By introducing a virtual auxiliary fold as a drift control mechanism, we numerically confirm the existence of stable quasi-periodic attractors.2026-03-02T21:39:05ZRyutaro IchikawaMitsuru Shibayama