Active Quantum Particles from Engineered Dissipation

2026-03-19T16:20:18Z

We introduce and characterize different models for an active quantum particle where activity arises from engineered dissipation-- specifically, from a suitably coupled nonequilibrium environment. These include a model of a particle moving on a lattice with coherent and dissipative hopping, as well as quantum generalizations of well-studied models of active behavior, such as the active Ornstein-Uhlenbeck process, run-and-tumble dynamics, and the active Brownian particle. Despite the different microscopic mechanisms at play, we show that all these models display key features of active motion. Notably, we observe a crossover from diffusive to active-diffusive behavior at long times, leading to an effective Péclet number, as well as a strong sensitivity to boundary conditions which, in our open quantum system context, arises from the Liouville skin effect. We discuss the role of quantum fluctuations and experimental realizations with superconducting circuits or cold gases, closing with perspectives for many-body effects in quantum active matter.

Navigating complex phase diagrams in soft matter systems

2026-03-19T13:52:58Z

Colloidal fluids can exhibit complex phase behavior and determining phase diagrams via experiments or computer simulations can be laborious. We demonstrate that the dispersion relation $ω(k)$, obtained from dynamical density functional theory for the uniform density system, is a highly versatile tool for {\it predicting} where in the phase diagram complex crystals form. The sign of $ω(k)$ determines whether density modes with wavenumber $k$ grow or decay over time. We demonstrate the predictive power by investigating the complex phase behavior of particles interacting via core-shoulder pair potentials. With complementary Monte Carlo simulations, we show that regions of the phase diagram where $ω(k)$ has one or several unstable (growing) wavenumbers are also where crystalline phases occur. Going further, by tuning these unstable wavenumbers via the interaction-potential and state-point parameters, we design systems with quasicrystals in the phase diagram. We identify a system with a certain shoulder-range exhibiting at least 10 different phases. Our general approach accelerates considerably the mapping of complex phase diagrams, crucial for the design of new materials.

Avalanches in the Random Organization Model with long-range interactions

2026-03-19T13:45:43Z

Oscillatory sheared suspensions, when observed stroboscopically, exhibit a reversible-irreversible transition as a function of the strain amplitude, which is a kind of absorbing phase transition. So far studies of this transition focused on global quantities, e.g. quantifying the irreversibility on one side of the transition or the time to reach a reversible state on the other side. Here, motivated by the kin depinning transition, we focus on the intermittent dynamics near the transition. We perform simulations of a modified Random Organization Model (ROM), a minimal particle model which we recently adapted to take into account the generic presence of long-range interactions mediated by the fluid, taking the power-law-decay exponent $α$ as an additional control parameter of the model. We show that at the absorbing phase transition, this model displays power-law-distributed avalanches. We characterize the avalanche statistics in terms of avalanche size, duration and number of particles involved, and we determine the associated exponents. By varying the exponent $α$, the fractal dimension of avalanches crosses space dimension $d$, inducing a qualitative change of the spatial structure of avalanches, from compact avalanches when interactions have a short range, to sparse avalanches when interactions are long-ranged. Finally, we characterize the clusters within the avalanches, which we also find power-law distributed.

Entropy maximization underlies topology and mechanical properties in dynamic covalent hydrogels

2026-03-19T13:23:01Z

Adding dynamic bonds in polymer networks enables reprocessing and recycling; however the full impact of reversible bonds on dynamic network mechanics remains unclear. We build model dynamic networks and observe substantial deviations from classic theory. We rationalize these findings by considering that bond exchange enables the networks to rearrange and adopt a topology with a higher entropy. This allows us to accurately predict the gel point and elasticity of the dynamic networks. Further, we show by controlling bond exchange that network rearrangement can dramatically alter the mechanical properties, even without loss of bonds.

Guided elastic waves informed material modelling of soft incompressible media

2026-03-19T12:39:33Z

Identifying a universal material constitutive law, that describes the mechanical response of rubber-like solids for all deformation fields and achievable extensions, is an outstanding challenge. Here, we propose to exploit the propagation of elastic waves and demonstrate that monitoring incremental guided wave propagation in an elastomer plate undergoing uniaxial extension reveals model sensitivities that are inaccessible in the corresponding static test. We measure the dispersion relations of the three zero-order guided modes, propagating parallel and perpendicular to the direction of imposed elongation. We compare them with predictions from the acoustoelastic theory, that also take into account material rheology, using parameters extracted from fitting the uniaxial stress-strain curve across three successive elongation regimes, following the methodical procedure of Destrade $\textit{et al.}$ (Proc. R. Soc. A 2017). We evidence that our approach lifts the degeneracy between hyperelastic models with different functional forms of the so-called $C_2$ term, which remain undistinguishable from static uniaxial tension stress-strain measurements alone. However, like their static counterpart, our dynamics measurements cannot distinguish between different generalized neo-Hookean models.

Elastocapillary lifting and encapsulation of water by a triangular elastic film under gravity

2026-03-19T12:20:13Z

We investigate the encapsulation of water by a thin elastic film as a minimal model of elastocapillary self-folding with fluid transport. An equilateral triangular polydimethylsiloxane film is lifted quasi-statically from a water surface, while its side length and thickness are systematically varied. Depending on these parameters, the film exhibits three distinct morphologies: folding, recoiling, and liquid encapsulation. We show that the observed morphology is selected by the competition between surface energy, gravitational energy of the liquid, and bending energy of the film. In particular, encapsulation occurs in a narrow parameter region corresponding to the intersection of the elastocapillary, elastogravity, and capillary length scales. This result provides a simple physical criterion for liquid encapsulation by elastic films, based on the balance of bending, capillary, and gravitational energies.

Mechanically concealed holes

2026-03-19T10:10:10Z

When a hole is introduced into an elastic material, it will usually act to reduce the overall mechanical stiffness. A general ambition is to investigate whether a stiff shell around the hole can act to maintain the overall mechanical properties. We consider this effect from a macroscopic continuum perspective down to atomistic scales. For this purpose, we focus on the basic continuum example situation of an isotropic, homogeneous, linearly elastic material loaded uniformly under compressive plane strain for low concentrations of holes. As we demonstrate, the thickness of the shell can be adjusted in a way to maintain the overall stiffness of the system. We derive a corresponding mathematical expression for the thickness of the shell that conceals the hole. Thus, one can work with given materials to mask the presence of the holes simply by adjusting the thickness of the surrounding shells, with no need to change the materials. Our predictions from linear elasticity continuum theory are extended to atomistic levels using molecular dynamics simulations of a model Lennard-Jones solid. These extensions attest the robustness of our predictions down to atomistic scales. Thus, they open a straightforward possibility to adjust the strategy of mechanical cloaking via atomistic manipulations. From both perspectives, the underlying concept is important in the context of light-weight construction.

Tuning polymer architecture for quasicrystal self-assembly

2026-03-19T09:53:06Z

Using computer simulations and theory, we investigate the ultrasoft interactions between dendrimers formed of a central polymer connected by stiff linkers to a corona of flexible polymers, forming `pompoms' at the ends of the linkers. We show that the resulting coarse-grained interaction potential between pairs of dendrimers exhibits tunable lengthscale competition based on properties of the core and corona polymers. We present a simple model for this pair potential, which we confirm using accelerated Monte Carlo methods. We then demonstrate the connection between dendrimer structure and mesoscopic phases by presenting parameter choices that result in stable dodecagonal quasicrystals, and show that the size of the region in the phase diagram where quasicrystals are stable can be controlled by tuning details of the polymer architecture alone. These results pave the way for experimental realization of soft matter quasicrystals by identifying what overall molecular architecture leads to their stability.

Dielectric response in proteins: The proteotronics approach

2026-03-19T08:47:58Z

The dielectric properties of proteins, particularly in their hydrated state, have been extensively studied. Numerous theoretical and experimental investigations have reported values of both the permittivity and the intrinsic dipole moments of specific proteins under well-defined hydration conditions. Since even approximate estimates of these properties are relevant from both fundamental and applied perspectives, we propose a easy-to-use method to calculate the relative permittivity that can be readily integrated into proteotronics workflows. To validate the proposed approach, we compare the results with those obtained using a classical macroscopic method. The outcomes are consistent and contribute further insight into this long-debated issue.

Non-equilibrium (thermo)dynamics of colloids under mobile piston compression

2026-03-19T08:39:55Z

We investigate the non-equilibrium compression of a confined hard-sphere colloidal fluid driven by a mobile boundary within dynamical density functional theory. The system consists of a fluid confined between two parallel walls, one acting as an overdamped piston subjected to a sudden increase in external pressure. The piston motion is controlled by a mobility parameter $K$, which sets the relative timescale between mechanical driving and diffusive relaxation. By varying $K$ over several orders of magnitude, we identify a crossover from quasi-static compression to a diffusion-limited strongly driven regime. For small $K$, the system evolves close to equilibrium and the total injected work approaches the equilibrium free-energy difference. For large $K$, the piston rapidly adjusts and the dynamics becomes governed by diffusive relaxation, leading to saturation in the piston trajectory, pressure--position relation, particle currents, and center-of-mass velocity. In this regime, the injected work and entropy production are bounded, reflecting constraints imposed by diffusive transport. The maximum injected power scales linearly with $K$, while the entropy-production peak exhibits a crossover from quadratic growth to saturation, with peak times displaying $1/K$ scaling. The entropy change of the thermal bath interpolates between a reversible limit and a strongly driven dissipative regime. Finally, the evolution of configurational entropy and external potential energy reveals a dynamical decoupling between confinement and structural relaxation, including transient non-monotonic behavior. These results provide a quantitative thermodynamic characterization of boundary-driven compression.

Direct measurement of osmotic pressure and interparticle interactions in colloidal dispersions

2026-03-19T04:19:18Z

Colloidal dispersions are widely found in systems ranging from natural environments to industrial materials.Their macroscopic properties such as viscosity and light scattering depend on their dispersibility, which is characterized by interparticle interactions. Osmotic pressure is induced in a solution with a concentration gradient, in which dispersity is one of the major factors governing the behavior of solutes. Thus, examining the relationship between the interparticle interactions and osmotic pressure may reveal colloidal dispersive properties. Although measuring the osmotic pressure is useful to understand dispersion systems, osmotic pressure is usually extremely low, and only limited experimental methods are available. In this study, we demonstrate that both osmotic pressure and interparticle interactions can be measured within the same experimental system, an optical tweezer system. The directly measured pressure is consistent with both the Brownian dynamics simulation and theoretical results based on the hard-sphere model, both of which were calculated using the interparticle interactions directly measured in the experiment. This agreement demonstrates the applicability of the proposed technique for investigating dispersive properties across multiple scales, linking microscopic particle-level interactions to macroscopic osmotic pressure within a single system. The proposed technique enables bottom-up design of colloidal materials through particle-level modifications.

Parity Breaking at Faceted Crystal Growth Fronts during Ice Templating

2026-03-19T00:22:07Z

Directional solidification of water-based solutions has emerged as a versatile technique to template hierarchical porous materials, but this nonequilibrium process remains incompletely understood. Here we use phase-field simulations to shed light on the mechanism that selects the growth direction of the lamellar ice structure that templates those materials. Our results show that this selection can be understood within the general framework of spontaneous parity breaking, yielding quantitative predictions for the tilt angle of lamellae with respect to the thermal axis. The results provide a theoretical basis to interpret a wide range of experimental observations.

Phase-Field Model of Freeze Casting

2026-03-19T00:17:05Z

Directional solidification of water-based solutions has emerged as a versatile technique for templating hierarchical porous materials. However, the underlying mechanisms of pattern formation remain incompletely understood. In this work, we present a detailed derivation and analysis of a quantitative phase-field model for simulating this nonequilibrium process. The phase-field model extends the thin-interface formulation of dilute binary alloy solidification with anti-trapping to incorporate the highly anisotropic energetic and kinetic properties of the partially faceted ice-water interface. This interface is faceted in the basal plane normal to the <0001> directions and atomically rough in other directions within the basal plane. On the basal plane, the model reproduces a linear or nonlinear kinetic relationship that can be linked to experimental measurements. In both cases, spontaneous parity breaking of the solidification front is observed, leading to the formation of partially faceted ice lamellae that drift laterally in one of the <0001> directions. We demonstrate that the drifting velocity is controlled by the kinetics on the basal plane and converges as the thickness of the diffuse solid-liquid interface decreases. Furthermore, we examine the effect of the form of the kinetic anisotropy, which is chosen here such that the inverse of the kinetic coefficient varies linearly from a finite value in the <0001> directions to zero in all other directions within the basal plane. Our results indicate that the drifting velocity of ice lamellae is not affected by the slope of this linear relation, and the radius and undercooling at the tip of an ice lamella converge at relatively small slope values. Consequently, the phase-field simulations remain quantitative with computationally tractable choices of both the interface thickness and the slope assumed in the form of the kinetic anisotropy.

Stable soap bubble clusters with multiple torus bubbles: getting a bit more exotic

2026-03-18T23:51:56Z

Recently, numerical examples of stable soap bubble clusters with multiple torus bubbles have been presented. The geometry of these clusters is based on the Platonic solids whose vertices have valence $3$ (in order to fulfill Plateau's laws): the tetrahedron, the cube, the dodecahedron. The clusters respectively contain a bubble of genus $3, 5, 11$. The construction is quite generic and can be used with any convex polyhedron. If stable, the cluster obtained using a polyhedron with $n$ faces has $3n+2$ bubbles and one of these bubbles has genus $n-1$. We propose here to show that is it possible to get stable soap bubble clusters with multiple torus bubbles using a geometry based on prisms and Archimedean solids as well.

Synthesis, Solvent-dependent Self-Assembly and Partial Oxidation of Ultrathin Cerium Fluoride Nanoplatelets

2026-03-18T20:43:23Z

Two-dimensional colloidal nanoplatelets (NPLs) with atomically defined thickness exhibit unique physical properties, yet understanding their formation mechanism and assembly remains essential for tuning their collective behavior. We report an optimized synthesis of triangular cerium-based NPLs with narrow size and shape distributions via thermal decomposition of cerium trifluoroacetate. Combining X-ray diffraction, XPS, and high-resolution STEM, we show that the expected CeF3 NPL structure undergoes partial oxidation, yielding an oxyfluoride composition CeOxFy. Beyond their composition, we investigate how these oleic acid-capped NPLs organize in solution and at interfaces. The choice of solvent governs both the solution-phase organization and the resulting superstructures formed upon evaporation at the liquid--air interface. In solvents that promote face-to-face stacking in solution, evaporation produces films organized into columnar assemblies tens of micrometers long, with the NPL planes oriented perpendicular to the interface. In contrast, solvents in which NPLs remain individually dispersed yield extended hexagonally ordered superlattices with edge-to-edge stacking spanning several micrometers, where the NPLs lie parallel to the interface in an edge-to-edge arrangement. These results highlight that solvent-mediated interactions and pre-existing organization in solution are decisive factors in determining the outcome of evaporative self-assembly of colloidal nanocrystals.