Flux-induced strengthening of the magnetic couplings in a flat-band diamond chain

2026-02-26T19:00:03Z

The physics in flat bands has emerged as an essential field in condensed matter physics where a plethora of phenomena can be unveiled, such as anomalous transport properties, superconductivity dominated by quantum geometry or exotic topological phases. Our goal here is to show that even in magnetic systems, the presence of flat bands can give rise to unexpected features. More precisely, we address the impact of an Aharonov-Bohm (AB) flux on the exchange couplings in magnetic diamond chains. The most remarkable result is the significant amplification of magnetic couplings at short distances induced by the AB flux, leading to a considerable increase in the thermal conductivity of the magnons. We have also shown that the flux-dependent decaying length of the couplings is connected to the quantum metric of the flat bands. Our results could be of interest for the control of magnetic properties in spintronic devices and relevant for the heat transport by magnons at the nanoscale in quantum technologies.

Kelvin wave and soliton propagation in classical viscous vortex filaments

2026-02-25T21:58:12Z

Vortex filaments are highly rotating localized structures of fluids that admits several types of excitation. Here, we study them by using numerical simulations of the three-dimensional incompressible Navier-Stokes equations. We first address the propagation of Kelvin waves, helicoidal excitations propagating along the filament, and measure their dispersion relation which turns out to be in good agreement with the original Lord Kelvin predictions. Then, inspired by the connection between vortex line dynamics and an integrable system, we show numerically the existence of solitons propagating along vortex filaments and study the collision of two of such structures. Finally, we show numerically the experimental feasibility of studying vortex solitons in the lab, by proposing an experiment for their generation.

Mitigating the sign problem by quantum computing

2026-02-25T14:15:46Z

The notorious sign problem severely limits the applicability of quantum Monte Carlo (QMC) simulations, as statistical errors grow exponentially with system size and inverse temperature. A recent proposal of a quantum-computing stochastic series expansion (qc-SSE) method suggested that the problem could be avoided by introducing constant energy shifts into the Hamiltonian. Here we critically examine this framework and show that it does not strictly resolve the sign problem for Hamiltonians with non-commuting terms. Instead, it provides a practical mitigation strategy that suppresses the occurrence of negative weights. Using the antiferromagnetic anisotropic XY chain as a test case, we analyze the dependence of the average sign on system size, temperature, anisotropy, and shift parameters. An operator contraction method is introduced to improve efficiency. Our results demonstrate that moderate shifts optimally balance sign mitigation and statistical accuracy, while large shifts amplify errors, leaving the sign problem unresolved but alleviated.

Shortcuts to Adiabaticity via Adaptive Quantum Zeno Measurements

2026-02-25T12:39:43Z

We consider the quantum Zeno dynamics arising from monitoring a time-dependent projector. Starting from a stroboscopic measurement protocol, it is shown that the effective Hamiltonian for Zeno dynamics involves a nonadiabatic geometric connection that takes the form of the Kato-Avron Hamiltonian for parallel transport, stirring the evolution within the time-dependent Zeno subspace. The latter reduces to counterdiabatic driving when projective measurements are performed in the instantaneous energy eigenbasis of the quantum system. The effective Zeno Hamiltonian can also be derived in the context of continuous quantum measurements of a time-dependent observable and the non-Hermitian evolution with a complex absorbing potential varying in time. Our results thus provide a unified framework for realizing shortcuts to adiabaticity via adaptive quantum Zeno measurements.

Apparatus to visualize flows in superfluid $^4$He below 1 K

2026-02-24T18:47:32Z

We describe a versatile apparatus for optical observations of experimental processes at temperatures down to 0.1 K. The cooling is achieved by a wet cryostat with a dilution refrigerator on a vibrationally-isolated platform, capable of continuous rotation at angular velocity of up to 3 rad/s. The illumination light beam from lasers on a non-rotating optical table at room temperature is introduced via an optical fiber. The images are transferred to the intensified camera at room temperature through a coherent bundle of $10^5$ optical fibers giving a spatial resolution of $\sim 30 μ$m, depending on the magnification used. The adjustment of the position of the illumination light, as well as of the focusing of the camera on the object under investigation, can be controlled remotely with the help of piezoelectric positioners. The apparatus was used for visualization of particles dispersed in superfluid helium at temperatures down to 0.14 K. In one version of experiment, fluorescent light from clouds of excimer molecules He$_2^*$, generated in liquid helium by electron impact from electrons injected by sharp field-emission tips, was recorded and analyzed. In another, fluorescent particles of diameters between 1 $μ$m and 6 $μ$m were initially loaded onto the horizontal surface of a piezoelectric crystal of LiNbO$_3$ and then injected into liquid helium by short bursts of high-amplitude oscillations at the crystal's resonant frequency 1 MHz. The particle trajectories were filmed at a frame rate of up to 990 fps and analyzed.

Anomalous temperature dependence of the electrical resistivity in R$_3$Co$_4$Ge$_{13}$ (R = Y, Lu) single crystals

2026-02-24T17:07:57Z

The presence of strong disorder can significantly impact electrical conduction in metallic systems. Here, we investigate the temperature dependence of the electrical resistivity, $ρ(T)$, in nonmagnetic single crystals of the Remeika-phase cage compounds R$_3$Co$_4$Ge$_{13}$ (R = Y, Lu). Contrary to the density of states (DOS) calculations in the literature, the experimentally measured $ρ(T)$ in both compounds exhibits semiconducting-like behavior, which we attribute to the strong structural disorder due to its unique crystal structure and low carrier-density. A detailed analysis of the electrical resistivity data reveals that neither the Arrhenius thermal activation law nor variable-range hopping (VRH) models can adequately describe their temperature dependence over the broad temperature range of 2-350 K. However, a model incorporating parallel conduction through both semiconducting and metallic channels provides an adequate explanation. In addition to a dominant metallic conduction below $\sim 10$~K, a negative temperature coefficient of the electrical resistivity ($dρ/dT$) is found in both samples. In the absence of magnetic impurities, the observed $dρ/dT < 0$ is interpreted in terms of the structural Kondo mechanism.

Generative Deep Learning for the Two-Dimensional Quantum Rotor Model

2026-02-24T11:06:16Z

The advancement of diverse generative deep learning models and their variants has furnished substantial insights for investigating quantum many-body problems. In this work, we design two models based on the foundational architecture of generative adversarial networks (GANs) to investigate the ground-state properties and phase transition characteristics of the two-dimensional quantum rotor model (QRM). Within a semi-supervised learning framework, we incorporate multiple layers of transposed convolutions in the generator, enabling the conditional GAN to more efficiently extract low-dimensional encoded information. Analysis of one-dimensional latent variables associated with ground-state samples for different system sizes allows us to pinpoint the location of the critical point. In addition, we introduce dynamically adaptive weighting factors related to the distributional characteristics into the loss function of the deep convolutional GAN, and utilize upsampling techniques to enlarge the generated sample sizes. Comparisons of the optimization processes for mean magnetization and potential energy density across different magnetization regimes of QRM demonstrate that our model can efficiently generate valid ground-state samples, significantly reducing computational time. Our results highlight the promising potential of generative deep learning in quantum phase transition research, especially in critical point identification and the auxiliary generation of simulation data for quantum many-body models.

Dynamic Lattice Disorder and Collective Dipole Coupling Give Rise to Dicke Physics in Perovskite Quantum Dots

2026-02-24T02:43:21Z

Halide perovskite quantum dots exhibit cooperative optical phenomena that are absent in conventional semiconductor nanocrystals, including exciton superradiance, superabsorption, and biexciton superradiance within individual dots. Here we develop a microscopic theory that identifies the physical origin of these Dicke effects and establishes how they can be controlled by materials parameters. The central result is that cooperative emission emerges from a competition between collective coupling of optical transition dipoles and lattice-induced disorder, with the balance governed by the Raman-derived phonon spectral density and the excitonic oscillator strength. At elevated temperature, strong Fröhlich coupling and glassy lattice dynamics produce dynamic disorder that suppresses dipole synchronization and yields incoherent emission. Upon cooling, lattice fluctuations freeze and cooperative coherence emerges when the collective coupling exceeds residual static disorder, defining size- and composition-dependent crossover temperatures that we map as phase diagrams. Extending the framework to biexcitons, we show that a confined biexciton constitutes a single correlated charge distribution dressed by a shared lattice configuration, enabling pathway-indistinguishable decay and cooperative radiative enhancement. The theory quantitatively accounts for observed size, composition, and temperature trends in radiative-rate constant ratios and biexciton binding energies, while explaining why full Dicke saturation is not universal. More broadly, the results establish Raman spectral weight and oscillator strength as design parameters for engineering cooperative quantum-optical behavior in quantum materials.

Transient Plastic Spin Labeling with Chlorine Dioxide

2026-02-23T22:11:47Z

Plastic waste, being one of the most important problems for humankind, poses severe threats to ecosystems, wildlife, and human health. Tracing, quantifying, and identifying types of plastic waste is of crucial importance to understand its environmental pathways and develop targeted strategies for reduction, recycling, and remediation. To contribute to addressing this global issue, we investigated the spin-labeling capabilities of aqueous chlorine dioxide (ClO$_2$) radicals upon introduction into poly(ethylene terephthalate) and utilized electron spin resonance spectroscopy for detection. The technique is capable of identifying plastic species as the unpaired electron of the radical molecule is strongly sensitive to its local environment through its coupling parameters. Temperature-dependent measurements revealed that the molecules are immobilized at low temperatures and exhibit well-resolved anisotropic and hyperfine spectra that are quantitatively described by a model spin Hamiltonian. Even above the melting point of water, some degrees of freedom remain blocked as a result of the polymer matrix. Furthermore, employing a time-series measurement at room temperature enabled us to determine the diffusion coefficient of the molecule in the polymer.

Selective decoupling in multi-level quantum systems by the SU(2) sign anomaly

2026-02-23T15:00:51Z

We investigate dynamical decoupling operated by $2π$-pulses in a two-level subspaces of a multilevel system showing that it may leads to selective decoupling. This provides a flexible strategy for decoupling transitions in a quantum network, when control to directly address them is not available which can be use to control internode interaction or actively suppress decoherence

Bismuth-substituted Lutetium Iron Garnet Films with Giant Visible-Range Magneto-Optical Sensitivity

2026-02-23T12:47:53Z

Magneto-optical materials are indispensable across modern physics, serving as the foundation for precision magnetic sensing, nonreciprocal photonics, and optical isolation technologies. The continual pursuit of materials with high Verdet constants has driven the development of garnet-based compounds exhibiting extreme magneto-optical sensitivity. In this work, we report the growth and comprehensive magneto-optical characterization of bismuth-substituted lutetium iron garnet (LuBiIG), a material that combines the large spin-orbit coupling of bismuth with the lattice stability of lutetium iron garnet. The films exhibit an exceptionally high Verdet constant of up to -0.120 deg/um/mT, peaking in the visible spectral range near 520nm. LuBiIG films with thicknesses between 80 and 220nm were grown by pulsed laser deposition and characterized at room temperature over the 500-820nm wavelength range. These results position LuBiIG as a highly sensitive magneto-optical material suitable for advanced cryogenic detection and hybrid quantum applications.

Bridging atomic and mesoscopic length scales with Replica Scanning Tunneling Microscopy: Visualizing the intra-unit cell pair density modulation of superconducting FeSe at micron length scale

2026-02-23T10:21:09Z

Scanning Tunneling Microscopy (STM) is a cornerstone technique for visualizing the electronic density of states with atomic resolution (typically below 0.1 nm). While the field of view of most STM setups extends up to a few microns, obtaining atomic resolution over these large areas is often impractical and excessively time-consuming. This is due to the need to acquire maps with a point number reaching 107 or more with a full current or conductance vs voltage curve at each point. The standard procedure is to make large scale maps and then select small regions to zoom-in for high-resolution atomic scale analysis. However, this approach fails to address a question which is often critical: Does a specific atomic-scale modulation of the electronic density of states persist over much larger, mesoscopic length scales? Here we present a new method: Replica STM (R-STM), that overcomes this limitation, allowing the study of atomic-scale phenomena up to micron length scales. We obtained new large-area STM tunneling conductance maps in UTe2 and FeSe, spanning areas over 200 nm in size. In these large scale maps we discovered signals with wavelengths significantly exceeding interatomic distances. We show that these large-wavelength signals are replicas of the underlying atomic-scale density of states modulations. R-STM leverages these replica signals to efficiently track atomic-scale features over large areas. Using this novel technique, we show that the pair density modulation discovered recently in FeSe persists with the same characteristic wavelength up to hundreds of nm length scales. R-STM provides a powerful and practical new capability for STM to compare atomic scale with micrometer scale phenomena. The proof of principle of R-STM can be extended to any other scanning probe microscopy experiment where a periodic signal is traced as a function of position.

Anisotropic magnetoresistance and magnetic field-tunable Weyl nodes in Weyl metal SrRuO$_{3}$ thin films

2026-02-23T04:36:45Z

Weyl semimetals are a unique class of topological materials, possessing Fermi-arc surface states and exhibiting the chiral anomaly effect. The chiral anomaly refers to non-equilibrium charge transfer within a Weyl-node pair of opposite chirality under the condition of aligned electric and magnetic fields ($\bf{E} \parallel \bf{B}$), leading to non-conserved chiral charges and thus enhanced electrical conductivity. In experiments, such an enhanced conductivity due to the chiral anomaly manifests as a negative longitudinal magnetoresistance (MR) when the external field $\bf{H}$ is applied along the bias current direction $\bf{I}$. In this work, we present rigorous $φ$- and $α$-dependent magnetotransport measurements to investigate such a negative longitudinal MR due to the chiral anomaly in a sunbeam-shaped device fabricated from an untwinned Weyl metal SrRuO$_{3}$ (SRO) thin film. Here, $φ$($α$) represents the angle between $\bf{I}$ and the in-plane $\bf{H}$(SRO monoclinic [001]$_{\rm o}$). Unusual $φ$ dependences of in-plane MR and Hall effects were uncovered at low temperatures, accompanied by the emergence of the fourfold-symmetric component in the in-plane MR. These results indicate that the chiral anomaly and resistivity anisotropy in SRO play important roles. In particular, the dramatic variation of Weyl nodes near the Fermi level through magnetic field manipulation of the magnetization orientation, as revealed by band structure calculations, is consistent with the observed in-plane MR and Hall effect.

Random purification channel made simple

2026-02-21T23:05:49Z

The recently introduced random purification channel, which converts $n$ i.i.d. copies of any mixed quantum state into a uniform convex combination of $n$ i.i.d. copies of its purifications, has proved to be an extremely useful tool in quantum learning theory. Here we give a remarkably simple construction of this channel, making its known properties -- and several new ones -- immediately transparent. In particular, we show that the channel also purifies non-i.i.d. states: it transforms any permutationally symmetric state into a uniform convex combination of permutationally symmetric purifications, each differing only by a tensor-product unitary acting on the purifying system. We then apply the channel to give a one-line proof of (a stronger version of) the recently established Uhlmann's theorem for quantum divergences.

Lecture Notes on Quantum Many-Body Theory: A Pedagogical Introduction

2026-02-21T11:37:42Z

In these notes, we present a rigorous and self-contained introduction to the fundamental concepts and methods of quantum many-body theory. The text is designed to provide a solid theoretical foundation for the study of interacting quantum systems, combining clarity with mathematical precision. Core topics are developed systematically, with detailed derivations and comprehensive proofs that aim to make the material accessible to graduate students and beginning PhD students. Special attention is given to formal consistency and pedagogical structure, so as to guide the reader through both the conceptual and technical aspects of the subject. This work is intended as a reliable starting point for further exploration and research in modern quantum many-body physics.