All optical ultrafast pure spin current in the altermagnet Cr$_2$SO

2026-04-14T14:48:12Z

All-optical generation of pure spin current -- the flow of spin in the absence of a corresponding charge flow -- relies on a symmetry based compensation of valley charge. The 2d $d$-wave altermagnets, ideal spintronics materials due to a very low spin-orbit coupling, possess a magnetic point group and highly anisotropic valley manifolds that would appear to preclude such current compensation, excluding them as materials for the ultrafast generation of pure spin current. Here we show that infra-red valley excitation combined with a THz pulse envelope allows the generation of large and nearly 100\% pure spin currents in the altermagnet Cr$_2$SO. Our approach is based on a valley selection rule coupling linearly polarized light to spin opposite valleys, along with the intrinsic momentum shift that a co-occurring THz pulse imbues a valley spin excitation with. These results thus provide a practical and all-optical route to the generation of pure spin current in $d$-wave 2d altermagnets, opening a route to lightwave control of spin in an environment with very low intrinsic spin mixing.

Spintronic THz emitters based on NiCu alloys

2026-04-14T13:36:24Z

We study THz emission from ferromagnet / nonmagnetic material (FM/NM) spintronic nanostructures in which the $Ni_xCu_{1-x}$ alloy with different $x$ is used as an FM, an NM, or both layers. The stoichiometric composition of the NiCu alloys standing at two positions (we denote it as [FM] or [PM]) is chosen so that it is ferromagnetic at room temperature in the case it is used as the FM layer, and is paramagnetic at room temperature for the NM layer. Besides, we choose the nickel ratio $x$ close to each other for both [FM] and [PM] types of the alloy (the difference is only $10\%$). We show that although NiCu[PM] does not contain heavy metal it acts as an effective converter of spin current into the electric one in our structure showing only 2.8 times smaller efficiency than Pt. Besides, the NiCu[FM] alloy, despite having quite small Curie temperature (approximately $65 ^\circ C$), acts as an effective spin source having the efficiency only 2 times smaller than Co in similar structures. This shows up the importance of boundary matching in the spintronic THz sources. Our NiCu-based THz sources reveal a possibility of effective thermally induced control of emission of THz radiation due to a unique combination of high emission rate and relatively small Curie temperature.

Surface-induced vortex core restructuring in a spin-triplet superfluid

2026-04-14T12:51:12Z

Observing the structure of quantized vortices can provide evidence for the pairing nature of a superfluid or superconductor and pinpoint its order parameter. Spin-triplet superfluid $^3$He supports a variety of vortices, calculated and identified so far in bulk fluid. We show numerically that the vortex core in $^3$He is strongly altered near a surface, resulting in a structure inhomogeneous along the vortex line. The effect is asymmetric with respect to the relative orientation of the core order parameter anisotropy axis and the surface normal. In a wide range of external conditions, the vortex structure at the surface is found to be completely different from that in bulk. The effect originates from the combination of spin-orbit interaction in triplet pairing with the symmetry breaking by the surface. As an implication, surface-limited vortex core observations in a triplet-candidate system may not reflect the bulk structure. We propose an experimental verification of the effect by measuring a transition in the vortex structure in thin slabs of superfluid $^3$He-B.

Momentum-dependent charge-density-wave gap formation in ZrTe_{2.98}Se_{0.02}

2026-04-14T06:01:34Z

We investigated the energy gap formation across the charge density wave (CDW) transition inof ZrTe_{2.98}Se_{0.02}. By employing a laser photoemission microscopy, we clearly resolved one elliptical Fermi surface (FS) around the Brillouin zone (BZ) center, and two quasi-one-dimensional FSs along the BZ boundary. We further mapped the intensity difference between the FSs below and above the CDW transition temperature. We found that the energy CDW gap formation is limited to the momentum region 0.25 Å^{-1} < ky < 0.8 Å^{-1} along \bar{B}-\bar{D} line, which coincides with the location of one of the quasi-one-dimensional FSs. Characteristic momentum dependence in the energy CDW gap suggests the importance of both FS nesting and band-dependent electron-phonon coupling for understanding the CDW state in ZrTe_{3} system.

Polymer-free van der Waals assembly of 2D material heterostructures using muscovite crystals

2026-04-14T04:28:27Z

The advent of van der Waals (vdW) heterostructures has enabled formation of bespoke materials with atomic precision, where numerous quantum and topological phenomena have already been discovered. This atomic-layer tunability, however, comes at a cost: individual 2D layers must be picked up, moved, and placed in a deterministic manner while keeping their interfaces atomically clean. Recent advances in machine learning and robotics place even stronger emphasis on the deterministic aspect of vdW assembly. Current polymer-based transfer methods satisfy neither the determinism nor cleanliness requirements. To this end, solutions are needed where adhesion can be dynamically and deterministically controlled without leaving organic contamination. Here, we present a polymer free transfer technique employing thin muscovite (mica) crystals. Temperature control over mica adhesion enables deterministic pick-up, stacking, and release of 2D materials, while their crystalline, inorganic nature ensures pristine interfaces and suppresses strain. Fully compatible with existing fabrication workflows, this approach enables the assembly of demanding vdW heterostructures, including those with exposed conductive layers, moiré superlattices and suspended membranes. Our method represents a promising strategy for vdW heterostructure fabrication toward its automatization.

Surface Plasmons in the Continuum

2026-04-13T19:54:16Z

The interest to foster plasmonic applications at energies in the ultra-violet, has escalated research initiatives in clusters of unconventional plasmonic materials like aluminum and indium,for which the surface-plasmon resonance appears above the ionization potential. Naturally, the quantum mechanical description calls for the incorporation of the ionization process, thereby making the ab initio calculations challenging. We present a robust approach within the time-evolution formalism of the time-dependent density-functional theory to calculate surface plasmon resonance in the continuum of metal clusters. Using the much studied Al$_{13}^-$ as a system of reference, we show that accurate description of the continuum and of the ionization of the cluster allow to capture a broad surface-plasmon in the UV. Application of this approach in aluminum clusters has given the size-dependent evolution from discrete spectral features in Al$_{6}$ to the surface-plasmon in larger clusters in the deep ultra-violet.

Ultrafast ghost Hall states in a 2d altermagnet

2026-04-13T12:01:57Z

Two-dimensional materials that exhibit optically active spin and valley degrees of freedom represent one of the most fascinating -- and potentially most technologically useful -- platforms for the ultrafast interaction of light and matter. Here we show, via the example of Cr$_2$SO, that two dimensional altermagnets host valley states controllable by femtosecond laser light: linearly polarized light pulses excite charge at one of two inequivalent valleys, with which valley charge is excited at determined by the polarization vector direction. This underpins a rich spin and valley physics including: (i) valleytronics $-$ the generation of nearly 100$\%$ spin polarized valley currents, as well as (ii) a "ghost Hall" effect $-$ the ultrafast creation of states in which spin and charge currents are orthogonal without invoking Hall physics. Our findings establish 2d altermagents as a platform providing a new route for the control of spin- and charge currents at ultrafast times.

Strong and weak wave turbulence regimes in Bose-Einstein condensates

2026-04-13T06:59:50Z

When a turbulent Bose-Einstein condensate is driven out-of-equilibrium at a scale much smaller than the system size, nonlinear wave interactions transfer particles towards large scales in an inverse cascade process. In this work, we study numerically wave turbulence in a three-dimensional Bose-Einstein condensate in forced and dissipated inverse cascade settings. We observe that when the forcing rate increases, thereby increasing the particle flux, the turbulence spectrum gradually transitions from the weak-wave Kolmogorov-Zakharov cascade to a critical balance state characterized by a range of scales with balanced linear and nonlinear dynamic timescales. Further forcing increases lead to a coherent condensate component superimposed with Bogoliubov-type acoustic turbulence. The role of vortices in such a strongly forced state is marginal, which makes this new state very different from the strongly turbulent state composed of a tangle of quantized vortex lines. We then use our predictions and numerical data to formulate a new out-of-equilibrium equation of state for the 3D inverse cascade.

Parent Hamiltonian Construction of Generalized Calogero-Sutherland Models

2026-04-13T06:56:13Z

The Calogero-Sutherland model is a paradigmatic integrable system describing one-dimensional non-relativistic particles with inverse-square interactions. At interaction strength $λ=2$, the CSM exhibits a deep connection to anyon physics, featuring the Laughlin-Jastrow polynomial as its exact ground state. Motivated by this structure, we develop a general reverse-engineering construction of positive semi-definite continuum parent Hamiltonians for trial states admitting a rational conformal field theory description with central charge $c<1$. By leveraging the null-vector structure of the underlying primary fields and the associated Belavin-Polyakov-Zamolodchikov equations, we derive corresponding many-body annihilation operators. We then apply this construction explicitly to the Moore-Read and $k=3$ Read-Rezayi states - relating to Ising and Fibonacci anyons, respectively - obtaining continuum Hamiltonians for which these Jack-polynomial states are exact zero modes. We emphasize, however, that our construction does not by itself establish ground-state uniqueness or determine the nature of the excitation spectrum.

A physicist-friendly primer on the Hamiltonian for quantum sensing in proteins: analytical expressions and insights for a toy model of the radical-pair mechanism

2026-04-13T01:56:44Z

Electron spin-dependent chemical reactions in proteins, often discussed under the 'radical-pair mechanism', remain the leading microscopic proposal for magnetic field sensing in biology. Yet the essential physics is often obscured by the complexity of realistic models. In this work, we present a physicist-friendly primer on the simplest radical-pair Hamiltonian that already captures many of the mechanism's best-known qualitative features. The contributions of this work are fourfold. First, we place on record a complete analytical solution of this toy model, which has previously been studied extensively, mostly through numerical and partial analytical approaches. Working in the experimentally relevant singlet-triplet basis, we derive closed-form expressions for the instantaneous singlet population and for two related time-averaged singlet yields. Second, we introduce a new interpretation of these results that makes several familiar features of radical-pair physics transparent. In particular, we show that the dynamics admit a bright-dark decomposition (in the sense of spin mixing), similar to structures studied in atomic physics. Third, through this bright-dark perspective, we clarify experimentally relevant features of the toy model. In particular, we show that the so-called 'low-field effect' arises from a coherence term between bright and dark sectors, and that the special role of zero field is best understood as a phase-locking phenomenon rather than merely as enhanced mixing. Fourth, we import methods developed in the context of technological quantum sensing to obtain further insight into the model. This allows us to clarify the role of initial state preparation and the trade-off between coherent phase accumulation and time-averaging penalties. The resulting toy model serves both as an analytically tractable benchmark and as a conceptual starting point for future work.

Surface ferrimagnetic order in RuO2 film

2026-04-12T14:22:29Z

RuO2, widely proposed as a prototypical altermagnet, remains intensely debated with regard to its magnetic nature. Here, we demonstrate that RuO2 is non-magnetic in the bulk, but possesses a spontaneous surface ferrimagnetic order. Using spin- and angle-resolved photoemission spectroscopy, we directly detect a narrow surface state with identical spin polarizations at opposite momenta and at the Brillouin-zone center, incompatible with the spin texture of any altermagnetic order. First-principles calculations identify the non-magnetic bulk state and reveal that the detected magnetism is confined to the fully oxygen-terminated surface, where the charge transfer from Ru to O at surface triggers a ferrimagnetic alignment between adjacent Ru sublattices with antiparallel moments of +0.48 uB and -0.04 uB. Our findings provide a unified explanation reconciling debating reports on the magnetism of RuO2, establishing surface ferrimagnetism as the origin of the observed magnetic signals, and distinguishing it unambiguously from altermagnetism.

A unified sharp-diffusive phase-field model for bulk and interfacial cohesive fracture

2026-04-12T12:58:53Z

In traditional phase-field modeling of multiphase materials, a significant challenge arises from the non-local nature of fracture energy regularization, where interfacial toughness is inherently coupled with the properties of the surrounding bulk phases. Achieving consistency with prescribed material properties typically necessitates complex corrections and exceptionally fine local mesh refinement near the interfaces. To address this fundamental issue, we leverage the capacity of the recently proposed $Ω^2$-model to manifest Dirac-like damage concentration and emergent displacement discontinuities, while introducing an analytical, strongly localized interfacial source term $q_φ$ into the phase-field formulation. It should be emphasized that the ``sharp" nature of the proposed model manifests as a naturally emergent strong discontinuity within a continuum framework, fundamentally distinguishing it from inherently discrete approaches such as cohesive element method. This allows for the independent and precise control of interface toughness in a straightforward manner. Theoretical analysis further reveals that the proposed framework can describe the cohesive failure of both bulk and interfacial regions using a unified set of parametric equations for the cohesive law, where the model parameters are directly determined by the local material properties without the need for additional corrections. The model's versatility is numerically validated through a series of benchmarks. The results confirm that the proposed model not only accurately reproduces diverse interfacial cohesive laws but also captures the intricate competition between interfacial debonding and matrix cracking. This sharp-diffusive phase-field model may provide a robust and computationally efficient tool for predicting complex fracture trajectories in sophisticated engineering materials.

Tiles from projections of the root and weight lattices of $A_n$

2026-04-12T10:37:22Z

Main purpose of this work is to introduce a general technique of projection of the Voronoi tessellation of the weight lattice $A_n^\ast$ and apply it for the lattice $A_4^\ast$. The projection of the Voronoi tessellation of the weight lattice $A_4^\ast$ produces a totally different tiling scheme than the tiling obtained from the Voronoi cell projection of the lattice $A_4$. The 2D faces of the Voronoi cell of the lattice $A_4^\ast$ are of two types: regular hexagons and squares in 4-dimensions but project into two types of hexagons and two types of rhombuses with edges of two lengths in proportion to golden ratio. The mathematical technique employed is also useful for the projections of the root lattice $A_n$. A convenient set of linearly dependent and non-orthogonal $\left(n+1\right)$ vectors $k_i$ is introduced. The simple roots and the fundamental weights are defined as $α_i=k_i-k_{i+1},\left(i=1,2,\ldots,n\right) ,ω_i=k_1+k_2+\ldots+k_i$, respectively. When the vectors $k_i$ are defined in an orthogonal basis, the first two components of $k_i$ determine the Coxeter plane. Projection of the Delone cells of $A_n$ and $A_n^\ast$ on the Coxeter plane displays the same type of tiles and tilings but the Voronoi cell projection of these lattices yields different tiles and tilings. Vertices of the Voronoi cell $V(0)$ of $A_n$ is the union of the orbits of the weight vectors $W(a_n){(ω}_1)\cup W\left(a_n\right)(ω_2)\cup\ldots\cup W\left(a_n\right)(ω_n)$ and the 2D faces are the rhombuses. The Voronoi cell ${V(0)}^\ast$ of $A_n^\ast$ is the permutohedron of order $(n+1)$ and its vertices are the permutations of the vectors ${k}_i$ of the vertex $\frac{1}{n+1}[\left(n+1\right)k_1+nk_2+\ldots+k_{n+1}]$. It has regular hexagons and squares as 2D faces in $n$-dimensions.

Thermodynamic conditions ensure the stability of third-order extended heat conduction

2026-04-11T16:01:03Z

In a recent work, Somogyfoki et al. (J. Non-Equilib. Thermodyn. 50, 59-76, 2025) analysed the linear stability of homogeneous equilibrium in third-order non-Fourier heat conduction within the framework of non-equilibrium thermodynamics with internal variables. They identified a stability condition, their equation (49), which could not be derived from the standard thermodynamic inequalities for the 2X2 conductivity blocks, and concluded that the Second Law does not guarantee stability in the most general case. Here we show that this conclusion was due to an overly conservative proof strategy: the standard thermodynamic conditions (concave entropy and non-negative entropy production, as expressed by the $2\times2$ block positive-definiteness inequalities (19)-(20) of the original paper) do suffice for linear stability. The key observation is that all coefficients of the dispersion polynomial remain positive for all physical wave numbers because their structure prevents positive real roots. This result confirms that thermodynamics, understood as a stability theory, ensures fundamental dynamic stability in all thermodynamically consistent third-order extended heat conduction theories. A comparison with the rate-equation approach of Giorgi, Morro and Zullo (Meccanica 59, 1757-1776, 2024) is also presented.

Nonlocal current-response theory of structured-light dichroism

2026-04-11T03:21:09Z

We develop a microscopic theory of optical absorption and structured-light dichroism in a nonlocal minimal-coupling framework. Starting from the minimal-coupling Hamiltonian, we express absorption as a bilinear functional of the electromagnetic vector potential and the nonlocal current response, providing a general description of light--matter coupling in optical vortex beams and other inhomogeneous fields. Dichroic signals are identified as helicity-odd projections of the nonlocal response kernel, and the response is resolved into symmetry, tensorial, and mode-space sectors. For single helical modes, the theory yields diagonal OAM-resolved contributions together with the corresponding selection rules and symmetry constraints. For mixed modes, interference between distinct OAM components provides access to off-diagonal coherence of the nonlocal kernel, with a tensor structure determined by the polarization composition of the field. The theory also clarifies how local structures associated with symmetric spatial dispersion, optical chirality, and tensorial anisotropy emerge as gradient-level manifestations of the underlying nonlocal response.