Molecular beam epitaxy of wafer-scale O-band InAs/InGaAs quantum dots on GaAs for quantum photonics

2026-03-31T16:07:14Z

We report a scalable molecular beam epitaxy strategy to achieve a low density of O-band electrically tunable InAs/InGaAs quantum dots (QDs) on GaAs(001) substrates. Our approach is based on a gradient deposition of InAs in the sub-ML regime and subsequent capping with an InGaA strain-reducing layer to redshift the emission wavelength. For different growth conditions, we investigate the optical properties of the dots using photoluminescence mapping and correlate with structural properties determined by scanning transmission electron microscopy. Using a surface roughness modulation technique and synchronizing InAs sub-monolayer deposition cycles with substrate rotation, we control the dot density and position low-density regions (< 1 QD per um^2) on the substrate. Hyperspectral imaging is used to map the spatial and spectral characteristics of many individual dots in the low-density region, confirming that our approach is universally applicable to conventional MBE growth on (001) surfaces. Finally, we tune the QD emission wavelength within the O-band using electric fields and demonstrate single-photon emission with g(2)(0) = 0.020(14).

Deep-UV bleaching of charge disorder in encapsulated graphene

2026-03-31T15:39:11Z

Disorder masks much of the rich physics in two-dimensional electronic systems, with charged impurities often the limiting factor. In graphene, progress in reducing disorder has largely stagnated since boron nitride encapsulation was introduced a decade ago. Here we show that a brief deep-UV exposure enhances the electronic quality of encapsulated graphene - typically by two orders of magnitude - by neutralizing charged impurities within boron nitride. Following illumination, standard graphene devices exhibit numerous evendenominator fractional quantum Hall states, including non-Abelian candidates, and frequently reveal hidden superlattice minibands. Even macroscopically inhomogeneous devices, seemingly unusable for transport studies, recover after deep-UV illumination and display Landau quantization in millitesla fields. This finding provides a straightforward route to exceptional-quality graphene, enabling further exploration of interaction-driven, topological and other quantum phenomena.

Gap edge eigenpairs from density matrix purification using moments of the Dirac distribution

2026-03-31T15:09:59Z

In this work, we propose a simple method to resolve the eigenstates located at the band gap edges of an electronic eigenspectrum using only the quasi-purified one-particle density matrix as input. The theoretical framework relies on the decomposition of the occupation number variance into a particle and hole moment. These moments, when purified using power narrowing iterations, allow to isolate the higher occupied and lower unoccupied single state projectors, giving readily access to the corresponding eigenpairs. We demonstrate that when degeneracy is encountered, power narrowing remains able to deliver relevant mixed states. From a benchmark of selected molecules, we show that the method is robust and efficient since it requires no more that a dozen of matrix-matrix multiplications at worst. The possibility of reducing the computational cost using Lanczos subspace approach is discussed. The very low algorithmic complexity of power narrowing makes it very easy to implement in electronic structure codes or libraries already featuring Fermi operator expansion or density matrix purifications.

Enhancing Spin Coherence of Optically-Addressed Molecular Qubit by Nuclear Spin Hyperpolarization

2026-03-31T15:08:13Z

Optically addressable molecular triplet spins provide a chemically tunable platform for quantum application, but their coherence is often limited by interactions with surrounding spin baths. Here we demonstrate controlled suppression of nuclear-bath-induced decoherence in photoexcited triplet spins of pentacene co-crystallized in high-purity naphthalene single crystals. By hyperpolarizing the proton spin bath through triplet dynamic nuclear polarization (triplet-DNP), magnetic noise generated by the nuclear spins is suppressed, leading to an extension of the electron spin transverse coherence time. Experimentally, we observe a 25\% enhancement of the spin-echo decay time with $60\%$ polarization of the proton spin bath. The measured scaling of the spin-echo decay time ($T_2$) with nuclear polarization quantitatively follows the predicted dependence derived from the polarization-controlled nuclear second moment. Both the enhancement and the absolute value of the coherence time are quantitatively reproduced by cluster correlation expansion (CCE) simulations. These results establish nuclear spin hyperpolarization as a general and actively tunable approach to engineering coherence in molecular qubits. This work provides a broadly applicable design framework for high-coherence molecular and solid-state spin systems.

Angular anisotropy landscape of vortex ensembles in polarized small-angle neutron scattering

2026-03-31T14:51:30Z

We present a symmetry-resolved classification of two-dimensional spin-flip small-angle neutron scattering (SANS) patterns arising from dilute ensembles of spherical nanoparticles hosting magnetic vortex states. Based on a linear vortex ansatz with an axially symmetric distribution of vortex axes and the corresponding analytical expression for the orientationally averaged spin-flip SANS cross section, we show that the angular scattering patterns organize into four distinct symmetry regimes: a four-fold anisotropy corresponding to coherent field-aligned magnetization, vertical and horizontal two-fold anisotropies associated with aligned and isotropically distributed vortex ensembles, and an isotropic ring-like condition separating the two two-fold regimes. The corresponding symmetry boundaries are obtained analytically and define a compact symmetry landscape in the parameter space of vortex amplitude and vortex-axis distribution width. Comparison with a nonlinear vortex profile shows that these symmetry regions are robust with respect to the detailed radial structure of the vortex core. The angular anisotropies are therefore governed primarily by rotational symmetry and by the statistical distribution of vortex axes, providing a compact and model-transparent classification framework of experimental polarized SANS data.

AMShortcut: An Inference- and Training-Efficient Inverse Design Model for Amorphous Materials

2026-03-31T14:39:49Z

Amorphous materials are solids that lack long-range atomic order but possess complex short- and medium-range order. Unlike crystalline materials that can be described by unit cells containing few up to hundreds of atoms, amorphous materials require larger simulation cells with at least hundreds or often thousands of atoms. Inverse design of amorphous materials with probabilistic generative models aims to generate the atomic positions and elements of amorphous materials given a set of desired properties. It has emerged as a promising approach for facilitating the application of amorphous materials in domains such as energy storage and thermal management. In this paper, we introduce AMShortcut, an inference- and training-efficient probabilistic generative model for amorphous materials. AMShortcut enables accurate inference of diverse short- and medium-range structures in amorphous materials with only a few sampling steps, mitigating the need for an excessive number of sampling steps that hinders inference efficiency. AMShortcut can be trained once with all relevant properties and perform inference conditioned on arbitrary combinations of desired properties, mitigating the need for training one model for each combination. Experiments on three amorphous materials datasets with diverse structures and properties demonstrate that AMShortcut achieves its design goals.

Superlinear Temperature-Dependent Resistivity and Structural Phase Transition in BaNi$_2$P$_4$

2026-03-31T14:29:49Z

The mechanism of anomalous superlinear temperature-dependent resistivity, $ρ(T)$, in the metallic unconventional clathrate BaNi$_2$P$_4$ was studied by examining its evolution with artificial disorder induced by low-temperature ($\sim$ 20 K) 2.5 MeV electron irradiation. We find a dominant effect of the tetragonal-orthorhombic transition at $T_s$ ($ \sim$373 to 378 K, depending on heat cycle rate and direction) on $ρ(T)$, with standard metallic $T-$linear resistivity above the transition and anomalous behavior in the orthorhombic phase below. The transition is accompanied by the formation of structural domains and a notable (about 4~K) hysteresis in the magnetization and resistivity measurements, clearly showing its first order character. Matthiessen rule is obeyed both above and below the transition, suggesting negligible changes in the electronic structure. This conclusion is supported by the smooth evolution of the Hall effect through the transition. The Hall number is in good agreement with band structure calculations both above and below the transition. The transition temperature is notably suppressed with electron irradiation. Raman scattering at temperatures above room temperature find softening of local Ba vibration mode in the orthorhombic phase on approaching the transition. $^{31}P$ NMR line splits in the orthorhombic phase, suggesting a partial shift of the Ba atom from the central position in the cage. We suggest that local Ba rattling leads to enhanced residual contribution to resistivity in the high temperature tetragonal phase, the decay of which is responsible for the anomalous temperature-dependent resistivity in the orthorhombic phase.

Ensemble-Based Data Assimilation for Material Model Characterization in High-Velocity Impact

2026-03-31T14:22:24Z

High-fidelity simulations are essential for predicting material behavior under high-velocity impact (HVI), but their accuracy depends on material models and parameters that are often calibrated by manual fitting to multiple costly experiments. In this study, we develop an ensemble-based data assimilation framework for automatic calibration of selected plasticity, fracture, and equation-of-state (EOS) parameters in HVI simulations using data from a single HVI test. The framework combines Smoothed Particle Hydrodynamics, the ensemble Kalman filter (EnKF), and adaptive covariance inflation to mitigate variance collapse. A simple benchmark first shows that the framework is at least one order of magnitude more computationally efficient than Markov chain Monte Carlo at comparable identification accuracy. We then use synthetic back-face deflection data for an AZ31B magnesium plate to identify representative parameters in the Johnson-Cook plasticity and fracture models and the Mie-Gruneisen EOS. Results under under-biased, over-biased, and limited-observation cases show that parameters to which the data are sufficiently sensitive can be accurately recovered within about five iterations, with convergent ensemble standard deviations. In contrast, insensitive parameters tend to converge to incorrect values and retain large ensemble spreads. With fewer observations, convergence is still achieved for sensitive parameters but requires more iterations. Under extreme prior bias, a parameter rejuvenation strategy drives sensitive parameters toward the true values even when the truth lies outside the initial ensemble spread. These results show that ensemble standard deviation provides a practical diagnostic for parameter sensitivity, identifiability, and potential non-uniqueness. Overall, the proposed framework offers an efficient and robust approach for material model characterization in HVI problems.

Many-Body effects beyond excitons in second-harmonic generation of monolayer MoS$_{2}$

2026-03-31T13:47:48Z

We present a quantitative study of many-body effects including the three-particle level on second-harmonic generation in monolayer MoS$_2$. Our approach combines many-body perturbation theory with time-dependent current-density-functional theory within an \textit{ab initio} framework in the optical limit. The inclusion of two-particle excitonic effects \textit{via} a dynamical long-range linear exchange-correlation kernel reproduces the qualitative features of the second-harmonic response, but underestimates the experimentally reported magnitude by nearly a factor of two. By incorporating three-particle trionic correlations through a static long-range quadratic exchange-correlation kernel, we achieve significantly improved quantitative agreement with experiment. These findings highlight the role of many-body interactions beyond the excitonic level in accurately describing second-order optical responses in two-dimensional semiconductors.

RHINO-MAG: Recursive H-Field Inference based on Observed Magnetic Flux under Dynamic Excitation

2026-03-31T13:43:52Z

Driven by the MagNet Challenge 2025 (MC2), increased research interest is directed towards modeling transient magnetic fields within ferrite material. An accurate time-resolved and temperature-aware H-field prediction is essential for optimizing magnetic components in applications with quasi-stationary / non-stationary excitation waveforms. Within the scope of this investigation, a selection of model structures with varying degrees of physically motivated structure are compared. Based on a Pareto investigation, a rather black-box gated recurrent unit (GRU) model structure with a graceful initialization setup is found to offer the most attractive model size vs. model accuracy trade-off, while the physics-inspired models performed worse. For a GRU-based model with only 325 parameters, a sequence relative error of 8.02 % and a normalized energy relative error of 1.07 % averaged across five different materials are achieved on unseen test data. With this excellent parameter efficiency, the proposed model won the first place in the performance category of the MC2.

Perspective: Towards sustainable exploration of chemical spaces with machine learning

2026-03-31T13:29:20Z

Artificial intelligence is transforming molecular and materials science, but its growing computational and data demands raise critical sustainability challenges. In this Perspective, we examine resource considerations across the AI-driven discovery pipeline--from quantum-mechanical (QM) data generation and model training to automated, self-driving research workflows--building on discussions from the ``SusML workshop: Towards sustainable exploration of chemical spaces with machine learning'' held in Dresden, Germany. In this context, the availability of large quantum datasets has enabled rigorous benchmarking and rapid methodological progress, while also incurring substantial energy and infrastructure costs. We highlight emerging strategies to enhance efficiency, including general-purpose machine learning (ML) models, multi-fidelity approaches, model distillation, and active learning. Moreover, incorporating physics-based constraints within hierarchical workflows, where fast ML surrogates are applied broadly and high-accuracy QM methods are used selectively, can further optimize resource use without compromising reliability. Equally important is bridging the gap between idealized computational predictions and real-world conditions by accounting for synthesizability and multi-objective design criteria, which is essential for practical impact. Finally, we argue that sustainable progress will rely on open data and models, reusable workflows, and domain-specific AI systems that maximize scientific value per unit of computation, enabling efficient and responsible discovery of technological materials and therapeutics.

Time-dependent global sensitivity analysis of the Doyle-Fuller-Newman model

2026-03-31T12:43:13Z

The Doyle-Fuller-Newman model is arguably the most ubiquitous electrochemical model in lithium-ion battery research. Since it is a highly nonlinear model, its input-output relations are still poorly understood. Researchers therefore often employ sensitivity analyses to elucidate relative parametric importance for certain use cases. However, some methods are ill-suited for the complexity of the model and appropriate methods often face the downside of only being applicable to scalar quantities of interest. We implement a novel framework for global sensitivity analysis of time-dependent model outputs and apply it to a drive cycle simulation. We conduct a full and a subgroup sensitivity analysis to resolve lowly sensitive parameters and explore the model error when unimportant parameters are set to arbitrary values. Our findings suggest that the method identifies insensitive parameters whose variations cause only small deviations in the voltage response of the model. By providing the methodology, we hope research questions related to parametric sensitivity for time-dependent quantities of interest, such as voltage responses, can be addressed more easily and adequately in simulative battery research and beyond.

Hunting Structural Demons in Digital Reticular Chemistry

2026-03-31T11:22:17Z

Digital reticular chemistry relies on accurate crystal structures to power computational screening, data-driven discovery, and structure-property analysis, yet recent studies reveal that more than half of the top-performing candidates in major computational screening campaigns are chemically invalid. In experimental MOF databases, structural errors arise when disordered or incomplete structural models are incorrectly converted into fully specified simulation inputs. In hypothetical MOF database, structures are complete by construction but may encode chemically implausible oxidation states, coordination environments, or charge distributions. We term these erroneous structural models "structural demons." This mini-review asks three questions: where these errors enter, how we find them, and how we prevent them. On the prevention side, the key steps are keeping diffraction data and synthesis details together from the start, using consistent curation when structures enter a database, and filtering topology choices before structure generation. Connecting these steps can keep many bad structures out of downstream databases and reduce the need to fix them later.

Early Prediction of Creep Failure via Bayesian Inference of Evolving Barriers

2026-03-31T10:36:16Z

Creep under a sustained load can persist for long times yet culminate in abrupt yielding or rupture, implying a finite lifetime even when the material appears solid. Here, we formulate lifetime prediction as Bayesian inference over an evolving activation-energy landscape. A time-dependent distribution of activation barriers controls deformation: stress lowers barriers, while irreversible rearrangements deplete the weakest sites and reshape the low-barrier tail. Using early-time acoustic emission data, Bayesian inference estimates the evolving barrier statistics in each sample and yields posterior predictive distributions for the time-to-failure. This approach provides online uncertainty-aware lifetime forecasts -- already at around 10~\% of the sample lifetime -- that link microscopic barrier evolution to macroscopic creep dynamics.

On the flash temperature in sliding contacts

2026-03-31T10:29:15Z

The temperature increase in the contact regions between solids in sliding contact can easily reach several hundred Kelvin and thereby dramatically affect friction and wear. The classical theories by Jaeger, Archard, and Greenwood, commonly used to estimate flash temperature, ignore the multiscale nature of real surfaces and instead approximate the frictional heat sources with circular or square shapes. Here, we present an analytical theory for the flash temperature valid for randomly rough surfaces with roughness across arbitrarily many decades in length scale. The theory extends established methods for stress correlation functions and peak stresses to temperature. Numerical results for rubber sliding on concrete, and granite on granite, are presented as illustrations. We show that classical theories for flash temperature fail severely for surfaces with multiscale roughness.