https://arxiv.org/api/oky40/TIMnpP4uSvuRYDGy4vZfo2026-07-18T00:20:31Z1106356015http://arxiv.org/abs/2509.03489v3Dissipationless dynamics of spin supersolid states in a spin-1/2 triangular antiferromagnet with impurities2026-07-15T14:52:03ZMotivated by recent experimental evidence for spin supersolid states in triangular-lattice compounds, we numerically investigate the dynamical properties of magnetic field-induced phases in the spin-1/2 easy-axis triangular antiferromagnetic Heisenberg model in the presence of magnetic impurities. In both weak- and strong-field spin supersolid states, the gapless Goldstone mode at the $K$ points remains robust against impurities, which is a direct manifestation of spin superfluidity. By contrast, at the same impurity density, impurities induce a splitting of the magnon bands in the conventional magnetic state, the so-called up-up-down state. In addition, the finite superfluid stiffness probed by the twisted phase in the spin supersolid states is consistent with the excitation spectrum. We argue that the excitation spectrum with impurities provides direct spectroscopic evidence for dissipationless spin dynamics in the spin supersolid states, which is experimentally accessible via inelastic neutron scattering.2025-09-03T17:18:04Z13+5 pages, 7+6 figuresYixuan HuangYuan GaoWei LiSeiji YunokiSadamichi Maekawahttp://arxiv.org/abs/2607.13896v1Chemical short-range order controls deformation pathways in a complex concentrated alloy2026-07-15T14:39:37ZChemical short-range order (CSRO) is an intrinsic feature of complex concentrated alloys (CCAs), yet its influence on deformation mechanisms is controversial because of the inconclusive state of concurrent CSRO quantification during deformation. Here, we provide experimental evidence that CSRO acts as an intrinsic thermodynamic state variable governing stacking-fault energetics and deformation pathways in a Co30Cr40Ni30 alloy. By comparing quenched (CSRO-lean) and aged (CSRO-enriched) conditions with equivalent grain structure and phase constitution, we isolate the influence of atomic-scale chemical ordering on mechanical behavior. Calorimetry confirms reversible CSRO formation, while synchrotron X-ray diffraction and electron microscopy reveal that CSRO suppresses deformation-induced fcc-hcp martensitic transformation at both room and cryogenic temperatures. Despite differences in transformation dynamics, the macroscopic tensile response is still broadly similar. Atomistic simulations show that CSRO increases both stable and unstable stacking-fault energies, raising the energetic barrier for partial-dislocation activity and stabilizing the fcc lattice against transformation. Together, the experimental and computational results establish CSRO as an added degree of freedom for tuning stacking-fault energetics and controlling deformation pathways in complex concentrated alloys.2026-07-15T14:39:37Z25 pages, 7 figures, 8 supplementary information figures, 42 referencesAngelo F. AndreoliGabriela B. RibeiroGuilherme C. StumpfMaria F. L. ValverdeGustavo BertoliVinícius P. BacurauDavid D. S. SilvaPedro H. F. OliveiraEric M. MazzerMamta SilwalGarritt J. TuckerRodrigo FreitasMartin SahlbergDaniel MiracleFrancisco G. Couryhttp://arxiv.org/abs/2607.13893v1Revealing the MoS2 Growth Mechanism in Chemical Vapor Deposition: Real-Time Imaging and Statistical Analysis2026-07-15T14:38:50ZChemical Vapor Deposition (CVD) is a promising method for scalable synthesis of two-dimensional transitional metal dichalcogenides (TMDs) such as MoS2, but challenges in reproducibility and controllability persist due to an incomplete understanding of their dynamic growth mechanisms. While in-situ characterization methods could provide valuable insights, it remains challenging to track a large ensemble of crystals to enable quantitative, statistical analysis. Here, we address this gap by developing and applying a semi-automated image processing pipeline to analyze in-situ optical microscopy footage of MoS2 growth. This framework enables the high-throughput reconstruction of complete growth trajectories for over 400 individual crystals from a single experiment. Our statistical analysis demonstrates that MoS2 crystallization is governed by an edge-attachment-limited mechanism rather than by precursor diffusion. Furthermore, MoS2 crystals exhibit non-competitive growth, indicating that precursor supply does not limit the growth of neighboring flakes until physical impingement occurs. These findings provide direct, quantitative evidence that advances the fundamental understanding of TMD growth, establishing a powerful methodology for rational optimization of the CVD growth of two-dimensional materials.2026-07-15T14:38:50ZFaizal ArifurrahmanTianshu ZhaiYuguo WangJing ZhangAndrew L. HittJun LouMing Tanghttp://arxiv.org/abs/2405.15528v2Ligand Field Exciton Annihilation in Bulk CrCl32026-07-15T14:25:18ZThe layered van der Waals material CrCl3 exhibits very strongly bound ligand field excitons that control optoelectronic applications and are connected with magnetic ordering by virtue of their d-orbital origin. Time-resolved photoluminescence of these exciton populations at room temperature shows that their relaxation is dominated by exciton-exciton annihilation and that the spontaneous decay lifetime is very long. These observations allow the rough quantification of the exciton annihilation rate constant and contextualization in light of a recent theory of universal scaling behavior of the annihilation process.2024-05-24T13:20:04ZJ. Chem. Phys. 161, 114706 (2024)Samanvitha SridharArio KhansariShaun O'DonnellAlexandra T. BarthEvgeny O. DanilovFelix N. CastellanoPaul A. MaggardDaniel B. Dougherty10.1063/5.0223772http://arxiv.org/abs/2601.09513v2Nanoscale Spatial Tuning of Superconductivity in Cuprate Thin Films via Direct Laser Writing2026-07-15T14:19:57ZCuprate high-temperature superconductors, such as Yttrium Barium Copper Oxide (YBCO), are extremely promising for emerging technologies such as low-power computing, data storage, quantum sensors and superconducting electronics. However, the realization of high-performance functional nanostructures presents formidable challenges due to the difficulty of applying conventional nanofabrication methods to such sensitive materials, making the search for alternative methods a key enabling factor. Since YBCO's superconducting and normal-state properties are highly dependent on oxygen stoichiometry, precise nanoscale control of the oxygen content represents a highly appealing approach for creating advanced nanoengineered devices. In this work, we demonstrate the precise fabrication of sub-micrometer, grayscale patterns over large areas in epitaxial YBCO thin films, achieving finely tuned optical and superconducting transport properties by locally controlling the stoichiometry through maskless direct laser writing under ambient conditions. Cryogenic magneto-optical imaging and transport measurements in irradiated devices directly demonstrate the spatial tuning of the critical temperature and carrier density with the patterning conditions. Correlated Raman microscopy and reflectometry indicate a laser-power dependent oxygen depletion in the irradiated regions. The proposed laser-controlled stoichiometry approach provides a direct and scalable method to navigate the phase diagram of high-TC superconducting oxides, offering new possibilities for integrating functional nanostructures into superconducting devices.2026-01-14T14:26:35Z19 pages, 5 figuresIrene BiancardiValerio LevatiJordi AlcalàThomas GünkelNicolas LejeuneRiccardo GirelliAlejandro V. SilhanekValeria RussoNarcís MestresDaniela PettiAnna PalauEdoardo Albisettihttp://arxiv.org/abs/2607.13863v1Ultrafast altermagnetophononics2026-07-15T14:07:37ZAltermagnets feature symmetry-dictated nontrivial spin splitting in electronic structure promising for next-generation spintronics, yet their ultrafast dynamical manipulation remains largely unexplored. Here, we establish altermagnetophononics as an efficient route for magnetic control via selective symmetry breaking induced by coherent phonons. Using the prototypical altermagnet $α$-MnTe as an example, we demonstrate that the targeted excitation of B$_{1g}$ mode selectively lifts the symmetry constraints protecting altermagnetism (AM), driving ultrafast transition into a transient compensated ferrimagnetic (cFiM) phase characterized by a global spin splitting without net magnetization. Further, we show that the proposed mechanism is broadly applicable by demonstrating a multi-mode symmetry breaking pathway, and by realizing a ferrimagnetic order with reversible magnetic moment in metallic CrSb. These findings elucidate the potential to obtain desirable nonequilibrium properties in altermagnets via coherent phononic control over their spin splittings.2026-07-15T14:07:37Z6 pages, 5 figuresChenyu WangYaxian WangSheng Menghttp://arxiv.org/abs/2607.13851v1Electron Beam Radiolysis-Assisted Growth of Rutile TiO2 Thin Films2026-07-15T13:59:29ZA new approach for growing crystalline thin films is developed that takes advantage of electron beam radiolysis being a constructive force to rearrange atoms into a crystalline structure. It is demonstrated that by irradiating the surface of a TiO2 film by an electron beam supplied by a reflection high energy electron diffraction (RHEED) gun inside the MBE chamber during growth, a crystalline film can be grown at much lower substrate temperatures, where deposited films typically appear amorphous. Here, rutile TiO2 films were grown using hybrid molecular beam epitaxy (MBE) allowing atomic level control of growth as well as an observation of radiolysis-driven crystallization. Analysis was carried out using a combination of SEM and atomic-resolution STEM imaging. It is also shown that by tuning the temperature of the substrate and the dose of the electron beam, the degree of crystallinity of the film can be controlled.2026-07-15T13:59:29ZSilu GuoNitin Sathish KumarSreejith NairSupriya GhoshBharat JalanK. Andre Mkhoyanhttp://arxiv.org/abs/2607.13848v1Temperature-driven sodium-ion dynamical-to-static crossover in the zig-zag ordered phase of Na$_{0.5}$CoO$_2$2026-07-15T13:57:25ZWe employ polarization-resolved Raman spectroscopy combined with first-principles calculations to study the sodium-ion lattice dynamics in a sodium zig-zag ordered cobaltate compound Na$_{0.5}$CoO$_2$. We detect two sodium phonon modes for the first time, and their mode frequencies are consistent with first-principles phonon calculations based on an orthorhombic unit cell. We find that they appear below around $T^*\sim300\pm50$K with large linewidth broadening, much lower than the sodium zig-zag ordering temperature $T_\text{S}\sim460$K, and then narrow at lower temperatures. We interpret the sodium-phonon anomalies occurring at $T^*$ as a dynamical-to-static crossover involving mainly the motion of sodium ions. Our results suggest that the gradual freezing of the sodium ions and the well-defined static sodium-zigzag order below $T^*$ set the stage for the emergent electronic and magnetic orders in the CoO$_2$ layer of Na$_{0.5}$CoO$_2$.2026-07-15T13:57:25Z17 pages, 12 figures, to appear in Physical Review BShangfei WuHengxin TanDong WuMingshu TanXinyu ZhouTianchen HuTao DongFeng JinQingming ZhangNanlin Wanghttp://arxiv.org/abs/2603.21969v2Visualizing spin-polarization of an altermagnet KV$_2$Se$_2$O via spin-selective tunneling2026-07-15T13:57:11ZAltermagnetism, a recently identified magnetic phase that combines vanishing net magnetization with momentum-dependent spin splitting, challenges the conventional dichotomy between ferromagnets and antiferromagnets. While several candidate materials have been proposed, direct experimental evidence linking crystal symmetry, electronic structure and d-wave spin polarization remains scarce. Here we report the visualization of a metallic d-wave altermagnet in KV2Se2O. Through spin-selective scanning tunneling microscopy powered by a topological insulator tip, we uncover symmetry-protected momentum-dependent spin splitting that follows a characteristic d-wave form factor. Our results establish KV2Se2O as a tunable platform to study the interplay between spin-valley locking, Fermi-surface instability and unconventional magnetism, and open a pathway toward symmetry-engineered spintronics without net magnetization.2026-03-23T13:33:25Z17 pages, 4 figures; Comments are welcomeGuofei YangChuang LiChengwei WangXudong ZhaoYifan WanHengrui GuiGuoqing ZengSaizheng CaoChuqiao HuQihe YuYujia ZhangDong ChenYu LiuYu SongYongjun ZhangFei LiuLun-Hui HuLin JiaoHuiqiu Yuanhttp://arxiv.org/abs/2607.13846v1First-principles Study of Structural and Electronic Properties of Mn-doped Cu2NiXY4 (X=Sn, Ge, Si; Y=S, Se) Chalcogenide Semiconductors2026-07-15T13:53:35ZIn this work, the effect of partial substitution of Mn by Ni on the structural and electronic properties of kesterite systems Cu2NiXY4 (X = Sn, Ge, Si; Y = S, Se) was studied using density functional theory (DFT). The mBJ+U method was used to characterize the bandgap more accurately. To the best of our knowledge, a systematic comparative study of Mn substitution in the entire Cu2NiXY4 (X = Sn, Ge, Si; Y = S, Se) family has not been previously performed. Due to crystallographic constraints of the kesterite unit cell, the substitution of a single Ni atom with Mn corresponds to 50%. This configuration was chosen to study the effect of Mn substitution on the structural and electronic properties of Cu2NiXY4 (X = Sn, Ge, Si; Y = S, Se) compounds, whereas the study of lower concentrations requires the use of a supercell and is the subject of further research. The calculation results show that the partial substitution of Ni with Mn preserves the tetragonal structure of kesterite and significantly alters the electronic structure. In all the compounds studied, the bandgap decreases from 1.028-3.397 to 1.007-3.333 eV. For example, in the Cu2NiSnS4 system, the bandgap width decreases from 1.59 eV to 1.49 eV. The narrowing of the bandgap results from hybridization between the Mn-3d, Cu-3d, and S/Se-p orbitals near the band edges, leading to a redistribution of electronic states around the Fermi level. The results demonstrate that Mn substitution is an effective strategy for controlling the electronic properties of Cu2NiXY4 kesterites, offering great promise for use in optoelectronic devices where adjustable bandgaps are required.2026-07-15T13:53:35ZFunctional Thin Films and Energy Materials,2026,2,59-65Iskandar RaufzodaDilshod NematovAmondullo Burhonzoda10.66000/3110-9772.2026.02.04http://arxiv.org/abs/2607.13836v1A Showcase of Using the Partial-Structure R1 to Assemble Small-Molecule Crystal Structures2026-07-15T13:45:20ZUsing a few concrete examples this paper has demonstrated a few observations on using the partial-structure R1 (pR1) to assemble small-molecule crystal structures. (1) Assembling can start with orienting and/or placing large fragments or small fragments containing heavy atom(s). (2) It is handy to attach a fragment to a partial model as only the orientation needs to be optimized. (3) In a structure containing heavy atoms it is impossible to directly calculate the orientations of a light-atom-only fragment. Instead, it is necessary to use residual reflection intensities in which the contribution of the partial model containing all heavy atoms is deducted away. These observations indicate that pR1 is a useful tool for solving some small-molecule crystal structures.2026-07-15T13:45:20Z10 pages, 2 figuresXiaodong Zhanghttp://arxiv.org/abs/2607.13779v1Mapping recrystallization trajectories in GaAs using latent space diffraction analysis2026-07-15T12:37:50ZRecrystallization in disordered solids proceeds through a sequence of local structural rearrangements that are difficult to resolve using conventional diffraction analysis. In amorphous and partially ordered materials, subtle variations in diffuse scattering, short-range order, and defect-mediated symmetry emergence encode the pathways through which ordering initiates and propagates. Here, we introduce a latent space framework for mapping these pathways directly from \textit{in situ} 4D-STEM diffraction data. A convolutional autoencoder provides a compact representation of structural motifs, and unsupervised clustering identifies recurring microstructural states, including amorphous, paracrystalline, crystalline, twinned, and hybrid intermediates. By tracking these states across temperature, we construct phase trajectory models that reveal the topology of the recrystallization landscape, including metastable basins, branching pathways, hybrid states, and temperature-dependent reorganizations of accessible states.
Applied to ion irradiated GaAs, this approach uncovers two distinct recrystallization regimes separated by a transition near 250\textdegree{}C. At low temperature, recrystallization is growth-dominated and dominated by the persistence of amorphous and crystalline states. At high temperature, the transformation landscape reorganizes: hybrid and faulted states become metastable precursors to twinning, polycrystalline regions stabilize, and twinned structures emerge as dominant end states. The latent space representation also identifies amorphous patterns with weak symmetry signatures that precede recrystallization. This reveals structural precursors to ordering that are not captured by conventional descriptors give new insights into how recrystallization is initiated.2026-07-15T12:37:50Z22 pagesEllis Rae KennedyKwanghwi JeErik Thiedehttp://arxiv.org/abs/2607.12719v2Influence of compaction pressure on the impedance of Gadolinium Doped Ceria electrolytes for IT-SOFCs2026-07-15T12:27:57ZGadolinium doped ceria (GDC) is one promising oxygen-ion conducting ceramic electrolyte for intermediate-temperature solid oxide fuel cells (IT-SOFCs), due to its high ionic conductivity at reduced operating temperatures, favorable defect chemistry, and compatibility with a broad range of electrode materials [1,2]. Despite extensive understanding of its intrinsic ion transport mechanisms, the influence of ceramic processing parameters on the effective electrical behavior of polycrystalline GDC electrolytes remains an active topic for investigation [3-5]. In particular, processing steps that govern green body formation and sintering can strongly affect microstructural features such as density, grain size, grain boundary character, and residual porosity, which in turn determine the macroscopic conductivity [4-6]. In this work, dense GDC ceramic pellets were fabricated under systematically varied isostatic compaction pressures ranging from 49 to 140 MPa, followed by sintering at 1350 C for four hours under identical thermal conditions. Platinum electrodes were deposited on both sides of the pellets by electron-beam deposition, and the electrical properties were characterized by electrochemical impedance spectroscopy (EIS) over a wide temperature range. The results demonstrate a dependence of the impedance with respect to compaction pressure.2026-07-14T12:43:54ZRenato A. N. de OliveiraCeleste Z. A. AquinoMagna Monteiro SchaererRafael Galiza YoshimuraLiliana MogniMaurico ArceDiego G. LamasLucia ToscaniMaria Belén Arcentales VeraEsteban Elvis Asto RamosMarcia Carvalho de Abreu FantiniTaofeeq Oladayo BelloTereza da Silva MartinsDanilo Waismann LositoJames Moraes de AlmeidaValeria Spolon MarangoniLeopoldo SuescunandSantiago Figueroahttp://arxiv.org/abs/2607.13734v1Microscopic constitutive theory of stress overshoot, yielding, and strain hardening in amorphous materials2026-07-15T11:47:06ZWe develop a microscopic constitutive theory for the nonlinear deformation of metallic and polymer glasses based on nonaffine elasticity coupled to irreversible many-body relaxation. The theory predicts the full stress--strain response, from linear elasticity through stress overshoot and yielding to steady plastic flow. We show that stress overshoot originates from the competition between a nonaffine elastic instability induced by strain-driven loss of mechanical connectivity at the atomic/molecular level, and viscous dissipation associated with structural relaxation. For polymer glasses, finite chain extensibility naturally accounts for strain hardening at large deformation. The stretched-exponential relaxation exponent is obtained independently from stress or modulus relaxation measurements and provides the primary dynamical input to the theory. Using a small set of physically meaningful parameters, the model quantitatively reproduces experimental stress--strain curves for metallic glasses, polycarbonate, PMMA, and epoxy resins over a broad range of strain rates. These results establish a unified microscopic framework linking relaxation dynamics, yielding, plastic flow, and strain hardening in amorphous solids.2026-07-15T11:47:06ZAnkit SinghValeriy V. GinzburgAlessio Zacconehttp://arxiv.org/abs/2605.31531v2Multiplet-Selective Photoelectron Diffraction from an Altermagnet2026-07-15T11:41:21ZDirect real-space probes of altermagnetic order remain scarce. Here we introduce multiplet-selective photoelectron diffraction (PED), a methodology in which different regions of a transition-metal core-level multiplet act as distinct photoemission source waves. Using multiple-scattering calculations for the metallic altermagnet candidate CrSb, we show that selected Cr $3p$ multiplet features with predominantly $Y_1^{+1}$ and $Y_1^{-1}$ character generate robust diffraction asymmetries sensitive to altermagnetic domains. We demonstrate that both circularly and linearly polarized light provide access to the effect, while suitable combinations of domains, light polarizations, and multiplet-energy windows suppress nonmagnetic diffraction backgrounds. The proposed approach can be implemented using standard momentum-resolved photoemission instrumentation and establishes core-level PED as a practical route toward domain-resolved studies of altermagnets.2026-05-29T16:43:39Z6 pages and 3 figures in the main text. 6 pages, 9 figures in the supplementL. Plucinski