https://arxiv.org/api/catIIoAdGrDnDqatvSazBWuZQiM 2026-04-01T11:33:09Z 107776 45 15 http://arxiv.org/abs/2603.29004v1 2026-03-30T21:05:15Z

The $n = 1$ Ruddlesden-Popper titanates, NaRTiO$_{4}$ (R = rare-earth), exhibit a structural behaviour where non-centrosymmetry is driven by cooperative oxygen octahedral rotations (OORs) rather than conventional second-order Jahn-Teller distortions. In this work, we present an \textit{ab-initio} investigation of the structural, electronic and hyperfine properties of the entire NaRTiO$_{4}$ series across the two disputed ground states, $Pbcm$ and $P\bar{4}2_1m$, and the high temperature $P4/nmm$ symmetries. Our results reveal an ionic-radius-dependent evolution from a tilt-dominated regime for small rare-earth ions to a distortion-dominated regime for larger cations, leading to an asymptotic regime in which the high-temperature phase becomes increasingly competitive with the ground-state structures as the ionic radius increases. In parallel, the electronic band gap follows a systematic evolution across the series, reflecting the underlying structural changes and the increasing dominance of octahedral distortions at larger ionic radii. The Electric Field Gradient (EFG) tensor reveals that, in the large-radius limit, all symmetries tend locally towards a similar environment. Away from this limit, the EFG tensor for different symmetries progressively diverges, providing a sensitive probe for phase transitions and revealing symmetry-specific fingerprints, particularly for the rare-earth and Ti sites. By establishing these EFG signatures, this work provides a roadmap for experimental techniques, such as Nuclear Magnetic Resonance (NMR) and Perturbed Angular Correlation (PAC), to resolve the ground-state symmetry of these structures.

2026-03-30T21:05:15Z L. F. Almeida A. N. Cesário P. A. Sousa P. Rocha-Rodrigues L. V. C. Assali H. M. Petrilli J. P. Araújo A. M. L. Lopes http://arxiv.org/abs/2603.28991v1 2026-03-30T20:45:34Z

This paper presents results from systematic investigations conducted in the HYPERION facility to quantify permeabilities of hydrogen isotopes in FLiBe over a temperature range of 773K - 973K. To address the knowledge gap resulting from widely scattered transport parameters reported in the earlier studies, HYPERION experiments incorporate specific provisions to probe unsubstantiated assumptions, including a one-dimensional permeation, membrane surface coverage by the salt, and ideal wettability of the salt-metal interface. Suppression of the isotopic transport behaviour for metal-side charging highlights the permeation barrier characteristics of a bubble-laden Ni-FLiBe interface, impacting permeability by up to 77%. This work attempts to resolve this issue via salt-side charging and informs constraints on the permeant charging methodology for future studies. The initial insights from HYPERION experiments call into question the design choices and estimated transport properties in earlier works. This study provides a plausible explanation for the observed scatter in H/D/T transport in FLiBe.

2026-03-30T20:45:34Z 21 pages, 13 figures Abhishek Saraswat Weiyue Zhou Nayoung Kim Jaron F. Cota Guiqiu Zheng Alexander A. Khechfe Caroline S. Barthel Michael P. Short Rémi Delaporte-Mathurin Kevin B. Woller http://arxiv.org/abs/2603.24873v2 2026-03-30T19:59:35Z

The recent experimental realization of two-dimensional (2D) transition metal nitrides (TMNs, e.g., Mo5N6, δ-MoN, and W5N6) opens new opportunities for exploring their fundamental physical properties at the two-dimensional limit. In this work, we propose a unified picture of transport phenomena in the nitrogen-rich 2D W5N6 and Mo5N6, and the stoichiometric 2D δ-MoN based on several observations and first-principles calculations. Temperature coefficient of resistance (TCR) and magnetoresistance (MR) from Hall measurements consistently suggest disorder-induced transport mechanism at low temperatures (10-30 K). Notably, we observe a transition from metal to semimetal driven by the variation of nitrogen content in TMNs, supported by the suppressed density of states at the Fermi energy in nitrogen-rich TMNs (e.g. Mo5N6) from first-principle calculations. Carrier density calculations of bulk TMNs and 2D TMNs with -NH termination groups further reveal the switching of majority carrier type of Mo5N6 at reduced thickness, which is in great agreement with Hall measurement results. Our findings demonstrate that high nitrogen content in metallic molybdenum nitrides can induce the transition to a semimetallic phase at the 2D limit, shedding light on both the fundamental aspects of these materials and directions in future material design.

2026-03-25T23:35:00Z Hongze Gao Da Zhou Nguyen Tuan Hung Chengdong Wang Zifan Wang Ruiqi Lu Yuxuan Cosmi Lin Jun Cao Michael Geiwitz Gabriel Natale Kenneth S. Burch Xiaofeng Qian Riichiro Saito Mauricio Terrone Xi Ling http://arxiv.org/abs/2603.28927v1 2026-03-30T19:04:03Z

The location of the hydrogen-helium (H/He) immiscibility boundary controls whether and where helium rain occurs in giant planets, yet it remains uncertain because high-pressure experiments are challenging and ab initio simulations are limited in system size and simulation time. We map this boundary by computing composition-dependent chemical potentials from large-scale molecular dynamics driven by machine learning potentials trained on three density functional approximations (PBE, vdW-DF, and the hybrid HSE). The three functionals yield consistent immiscibility boundaries, and the demixing temperatures are typically ~2000 K lower than previous ab initio simulations using small system sizes across the pressure range of 100-1000 GPa. Fitting the H/He mixing free energy to a Redlich-Kister regular solution model rationalizes the thermodynamic driving force for phase separation and provides a predictive representation of the boundary. Comparison with current planetary interior profiles indicates that helium rain is plausible in Saturn but unlikely in the warmer interior of Jupiter. Our results narrow the uncertainty in the H/He immiscibility boundary and provide inputs for planetary models that couple demixing, heat transport, and composition gradients in gas giants.

2026-03-30T19:04:03Z Xiaoyu Wang Sebastien Hamel Bingqing Cheng http://arxiv.org/abs/2510.12405v3 2026-03-30T18:40:33Z

To address pressing scientific challenges such as climate change, increasingly sophisticated generative models are being developed to efficiently sample the large chemical space of potential functional materials. The proliferation of these models has necessitated the establishment of rigorous evaluation metrics. While uniqueness (U), novelty (N), and stability (S) of samples serve as standard metrics, their current formulations show several limitations. U and N rely on binary comparisons of crystals, rendering them dependent on heuristic thresholds, incapable of quantifying the degree of similarity, sensitive to atomic coordinate perturbations, and not invariant to sample permutation. Similarly, the binary assessment of S risks a premature exclusion of marginally unstable yet potentially novel candidates. These limitations are addressed by making the aforementioned metrics continuous. Furthermore, we integrate them into a unified metric ``continuous SUN" (cSUN), which offers a smoother score distribution and greater tunability than the conventional binary SUN metric. Experimental results demonstrate that our continuous metrics provide granular insights into sample distributions and facilitate the identification of the most promising candidates. Finally, the use of cSUN as a reward signal in reinforcement learning is explored, showing that its adjustable weighting scheme effectively mitigates reward hacking and avoids local minima.

2025-10-14T11:38:21Z 23 pages (17 pages of main text). See https://github.com/WMD-group/xtalmet for the code. Significantly extended from the early version of this work, which was accepted to the AI4Mat workshop at NeurIPS 2025 Masahiro Negishi Hyunsoo Park Kinga O. Mastej Aron Walsh http://arxiv.org/abs/2603.28726v1 2026-03-30T17:44:03Z

This investigation demonstrates that the pentagonal PdTe2 (penta-PdTe2) monolayer is a highly tunable two-dimensional (2D) photocatalyst, characterized by the bandgap of 1.75 eV and high hole mobility. Using density functional theory calculations with the HSE06 functional, we show that tensile strain engineering (particularly at +2% and +3%) is essential for enabling spontaneous water splitting. At these strain values, the valence-band maximum and conduction-band maximum straddle the water redox potentials (H+/H2 and O2/H2O) in both acidic (pH=0) and neutral (pH=7) conditions. The monolayer's low hole effective mass facilitates rapid charge extraction, mitigating recombination and driving the oxygen evolution reaction (OER) more effectively than many hexagonal and pentagonal counterparts. The Gibbs free energy (ΔG) pathways indicate that overpotentials for the hydrogen evolution reaction (HER) and OER are highly sensitive to mechanical deformation, specifically biaxial strain, through which +3% tensile strain, yielding an optimized balance of overpotentials of ηHER = 0.70 V and ηOER = 0.72 V at pH=7. Finally, integrating optical absorption with thermodynamic driving forces results in a Solar-to-Hydrogen (STH) efficiency of 20.40% at pH 7. This exceeds the performance of several previously reported 2D catalysts, positioning penta-PdTe2 as a superior candidate for sustainable, solar-driven hydrogen production.

2026-03-30T17:44:03Z 23 pages, 6 Figures Narender Kumar Shambhu Bhandari Dario Alfè Nacir Tit Ravindra Pandey http://arxiv.org/abs/2603.28725v1 2026-03-30T17:42:18Z

Floquet engineering provides a powerful pathway for creating non-equilibrium phases of matter with tailored electronic structures and properties through time-periodic driving. As the original theoretical prototype, graphene established the framework in which the Floquet topological insulator with light-induced anomalous Hall effect was proposed. However, the defining spectroscopic signature of Floquet engineering in graphene--light-induced hybridization (avoided-crossing) gap at Floquet band crossings, has remained experimentally elusive. Here, we report direct observation of Floquet-induced hybridization gap in monolayer graphene under resonant driving by a strong light field. Time- and angle-resolved photoemission spectroscopy reveals gap opening at Floquet band crossings, accompanied by coherent Floquet sidebands. The gap exhibits pronounced momentum anisotropy, featuring two Dirac nodes protected by the spatiotemporal symmetry and tunable by light polarization. These results provide long-sought experimental demonstration of Floquet band engineering in graphene, opening up opportunities for light-field engineered quantum phases in graphene and related materials.

2026-03-30T17:42:18Z Nature Materials (2026) Fei Wang Xuanxi Cai Xiao Tang Jinxi Lu Wanying Chen Tianshuang Sheng Runfa Feng Haoyuan Zhong Hongyun Zhang Pu Yu Shuyun Zhou 10.1038/s41563-026-02549-y http://arxiv.org/abs/2603.28724v1 2026-03-30T17:42:02Z

Floquet engineering provides an emerging pathway for tailoring the electronic states of quantum materials through time-periodic drive. A critical step along this direction is achieving light-induced modifications of the dynamical electronic structure, such as avoided-crossing gap at the Floquet Brillouin zone boundary, via efficient coupling of electrons with the coherent light-field. Here, we report robust Floquet-induced gap in bulk graphite that persists despite the presence of interlayer coupling and photo-excitation. Using time- and angle-resolved photoemission spectroscopy with intense mid-infrared pumping, we directly reveal Floquet-induced gaps at resonance points both in the valence and conduction bands, accompanied by coherent Floquet sidebands. The gap and sidebands coexist with photo-excited carriers, yet their distinct timescales allow us to disentangle their origins. Our demonstration of robust Floquet-induced gaps establishes graphite as a platform for coherent manipulation of Dirac fermions and realization of light-engineered quantum phases.

2026-03-30T17:42:02Z Chinese Physics Letters (2026) Fei Wang Xuanxi Cai Wanying Chen Jinxi Lu Tianshuang Sheng Xiao Tang Jiansong Li Hongyun Zhang Shuyun Zhou 10.1088/0256-307X/43/5/050705 http://arxiv.org/abs/2603.13206v2 2026-03-30T17:29:22Z

The location of electrons governs phenomena ranging from chemical bonding and electric polarization to the topological classification of band insulators and the emergence of correlated states in quantum matter. While a prescription exists for finding local state representations of electrons in one-dimensional insulators, no comparably general theory exists in higher dimensions. Here, we introduce a general framework for finding the location of electrons in insulators in two and three dimensions based on the spectral properties of quantum-mechanical operators that we term Spatial Localizers. This framework naturally extends the notion of Wannier centers to insulators with boundaries, defects, and disorder, which we use to establish a position-space formulation of the bulk-defect correspondence for electronic charge. This framework also yields maximally localized electronic states. As two representative examples, we show that these states reduce to maximally localized Wannier functions in atomic insulators, whereas in Chern insulators they form coherent states that mirror the coherent-state structure of Landau levels in the quantum Hall effect.

2026-03-13T17:42:11Z Haylen Gerhard Yifan Wang Alexander Cerjan Wladimir A. Benalcazar http://arxiv.org/abs/2601.18911v2 2026-03-30T14:37:09Z

This work investigates the propagation of elastic waves in periodic Kelvin-cell chains, focusing on symmetry-breaking geometric modifications induced by twisting the cell's faces. By imposing such twists, the original lattice topology is preserved, while mirror symmetries are strategically broken through modifying a single geometric parameter, allowing wave characteristics to be adjusted without additional resonators or mass augmentation. The complex-valued Bloch-Floquet analysis reveals that twisting activates two distinct wave attenuation mechanisms: Bragg-type band gaps associated with periodicity-induced scattering, and polarization-dependent band gaps arising from longitudinal-torsional mode coupling and avoided crossings. To obtain qualitative and quantitative insight into these mechanisms, a simplified analytical model with coupled translational and rotational degrees of freedom is considered. The finite-element wave transmission calculations are experimentally validated on SLA-printed three-cell specimens, for which wave attenuation reaches up to 20 dB within the predicted band-gap frequencies. Note that high prediction accuracy requires accounting for viscoelastic material behavior, underscoring the importance of material behavior on the wave propagation characteristics. Overall, the findings show that modest geometric modifications to a classical Kelvin-cell lattice can enhance wave-filtering behavior, offering a tractable design strategy for vibration control in lightweight architected lattices.

2026-01-26T19:19:23Z 32 pages including supplementary material, 12 figures Lukas Kleine-Wächter Anastasiia O. Krushysnka Romain Rumpler Gerhard Müller http://arxiv.org/abs/2603.22849v2 2026-03-30T14:12:17Z

Platinum oxides are vital catalysts, but their limited thermal stability hinders applications. Recent studies have uncovered a structural transition in two-dimensional platinum oxides that significantly enhances their thermal resilience by several hundred Kelvin. Herein, we demonstrate that this enhanced stability stems from the mechanical robustness of the elastic network at the atomic scale. Prior to the transition, an over-constrained lattice generates localized states of self-stress through an incommensurate Moiré pattern with the platinum substrate, reducing thermal endurance. After the transition, the oxide shifts to a mechanically flexible structure with balanced degrees of freedom and constraints. The isostatic network, together with the platinum substrate, forms a commensurate Moiré superlattice that relaxes elastic energy and enhances stability. These findings highlight the fundamental role of network connectivity in governing thermal stability, and provide a design principle for catalysts in extreme environments.

2026-03-24T06:40:12Z 11 pages, 9 figures Fangyuan Ma Mengzhao Sun Xuejian Gong Jun Cai Zhujun Wang Di Zhou http://arxiv.org/abs/2603.20113v2 2026-03-30T14:05:31Z

In solid-state batteries, ceramic solid electrolytes are penetrated by dendrites when plating above a critical current density $J_\mathrm{crit}$. A dendrite will propagate by metal deposition at a pre-existing dendrite tip if the mechanical energy required to crack the ceramic open is less than the electrical energy (Joule heating) wasted by forcing the current to detour around the dendrite to the flat electrode surface. Based on this principle of minimal power dissipation, a dependence of $J_\mathrm{crit}\propto c_\mathrm{max}^{3/2}$ is derived. $c_\mathrm{max}$ is the length of the longest preexisting, sufficiently thin interfacial defect. Consequentially, scattering of $J_\mathrm{crit}$ between samples must follow a Weibull-distribution, similar to the tensile strength of ceramic components.

2026-03-20T16:37:08Z Uploaded for discussion Ansgar Lowack http://arxiv.org/abs/2603.28461v1 2026-03-30T14:01:55Z

Molybdenum disulfide (MoS2) is a promising 2D transition metal dichalcogenide (TMD) for optoelectronics and quantum technology applications, but faces challenges in scalable synthesis and defect engineering. Oxygen-assisted chemical vapor deposition (O-CVD), which introduces in-situ oxygen during growth, shows excellent potential in resolving both issues at once. Although co-flowing oxygen shows improvement in growth, the underlying mechanistic role of oxygen remains unclear. In this work, a combination of oxygen dosing experiments, density functional theory (DFT) calculations, computational fluid dynamics (CFD) simulations, and ab initio molecular dynamics (AIMD) simulations, uncover the dual role of oxygen in O-CVD. Firstly, AIMD reveals that oxygen increases MoO3 sublimation and enhances Mo3O9 supply. Concomitantly, DFT reveals that sulphur oxides, due to their bulkier nature than pure S2, limit the formation of reactive MoS6 intermediates. Subsequently, by experimentally varying the oxygen flow-interval, flow-rate, and flow-time, and correlating them with CFD simulations, we decouple oxygen's roles in source-poisoning prevention (i.e. MoO3 evaporation) and growth regulation. We find that maintaining a low sulphur-to-oxygen (S:O2) ratio at the MoO3 boat and substrate during nucleation, and a high S:O2 ratio at the substrate during growth is the key to obtaining large-area high-quality monolayer MoS2, confirmed by our optical measurements. Based on our understanding, we present a kinetic phase diagram for MoS2 synthesis, which will enable controlled oxygen dosing as a tuning parameter for scalable, defect-controlled monolayer MoS2 synthesis.

2026-03-30T14:01:55Z 42 pages, 6 main text and 11 supplementary figures Keerthana S Kumar Abhijit Gogoi Madhavan DK Nampoothiri Bhavesh Kumar Acharya Manvi Verma Ananth Govind Rajan Akshay Singh http://arxiv.org/abs/2512.24372v3 2026-03-30T13:55:59Z

Electrochemical systems are important for a sustainable and defossilized energy system of the future. While accurate and precise, the corresponding electrochemical measurements, in which many reactions may occur simultaneously, often do not contain enough information to understand the underlying mechanism and processes. This information, however, is crucial towards rational materials and devices as well as process development and for inventing innovative concepts. In this perspective, we introduce explicitly the concept of "X-ray Coulomb Counting" in which X-ray methods are used to quantify on an absolute scale how much charge is transferred into which reactions during the electrochemical measurements. This allows to interpret the electrochemical measurements in detail and obtain the desired phenomenological and mechanistic understanding. We show a few recent examples from the Li-ion battery literature in which the concept of X-ray Coulomb Counting was employed to obtain foundational understanding.

2025-12-30T17:31:12Z Chuntian Cao Hans-Georg Steinrück http://arxiv.org/abs/2603.28424v1 2026-03-30T13:31:39Z

The exchange bias (EB) in ferromagnetic/antiferromagnetic (FM/AFM) bilayer systems causes a shift of the magnetic hysteresis curve after field cooling through the Néel temperature of the AFM. In some cases, this shift is accompanied by an asymmetry between ascending and descending branches. In the past, this asymmetric magnetization reversal has been studied in different bilayer systems, including polycrystalline Co/CoO thin films. Here we investigate the asymmetric magnetization reversal in an epitaxial fcc-Co(001)/CoO(001) thin film grown on MgO(001) by molecular beam epitaxy at varying temperatures up to room temperature after field cooling along the easy and the hard axes. Room temperature measurements of the longitudinal and transverse magneto-optic Kerr effect show different magnetization reversal processes via stable intermediate states for different angles between external magnetic field and magnetic easy axes. Once the sample is cooled below the blocking temperature, a pronounced asymmetric magnetization reversal can be observed. We show that in contrast to polycrystalline bilayers, the loop asymmetry stays constant after multiple training cycles and that the magnitude of the asymmetry is directly correlated with the magnitude of the EB.

2026-03-30T13:31:39Z Maik Gaerner Judith Bünte Finn Peters Inga Ennen Hermann Tetzlaff Johannes Fiedler Tomasz Blachowicz Luana Caron Andreas Hütten Andrea Ehrmann Martin Wortmann