https://arxiv.org/api/WvI30Tx1d1EDEm+AOLsnVUO2nbY 2026-07-21T07:29:38Z 110727 150 15 http://arxiv.org/abs/2607.15049v1 2026-07-16T14:29:38Z

Characterizing the mechanical response of materials traditionally requires solving optimization problems in which model parameters are calibrated or trained to minimize the discrepancy between model predictions and experimental data. This process can be computationally expensive and time-consuming. To overcome this limitation, we propose two neural operator architectures that directly map experimentally measured data to the constitutive functions governing the mechanical response of the material: Physics-Augmented Neural Operators (PANO) and Constitutive Artificial Neural Operators (CANO). The proposed neural operators approximate the mapping between the infinite-dimensional input space of full-field displacement measurements and net reaction forces, and the infinite-dimensional output space of hyperelastic strain-energy density functions. The displacement fields are encoded through Laplacian eigenfunctions to obtain discretization-independent and noise-robust predictions. Our framework constrains the output space to physically admissible material models that satisfy fundamental physical requirements by design. The neural operators are trained on simulated data tuples of displacement fields and reaction forces for a range of material models. Once trained, the neural operators enable near-instantaneous material characterization and require only a single forward pass to infer the strain-energy density function from a given experimental dataset. We test the predictive power of the neural operators for unseen data, noisy data, data with missing information, data from different spatial discretizations, and data from geometries of different sizes.

2026-07-16T14:29:38Z Moritz Flaschel Burigede Liu Ellen Kuhl http://arxiv.org/abs/2607.15032v1 2026-07-16T14:14:31Z

Liquid transport growth (LTG) is a horizontal flux growth technique that is closely analogous to chemical vapor transport, with the key distinction that a molten flux rather than a vapor serves as the transport agent. Unlike conventional flux growth, LTG spatially separates charge dissolution and crystal precipitation and couples them through continuous solute transport under a deliberately imposed temperature gradient. This enables crystal growth to begin before the charge is completely dissolved, removes the equilibrium solubility constraint on the starting charge/flux ratio, and allows large yields of single crystals to be obtained from a single growth. Recent studies have further shown that by spatially separating dissolution and crystallization and maintaining crystallization at a nearly constant temperature, LTG is particularly effective for two classes of materials: compounds that crystallize only within a narrow temperature and/or composition window, and compounds whose stoichiometry, defect concentration, and thus physical properties are sensitive to the crystallization temperature. In this review, we discuss representative examples including Fe$_3$Sn$_2$, CrTe$_3$, YFe$_2$Ge$_2$, UTe$_2$, CeRh$_2$As$_2$, MoTe$_2$, WTe$_2$, and LuNb$_6$Sn$_6$ to illustrate the unique capabilities of LTG for producing high quality single crystals of diverse quantum materials. We also summarize practical considerations for LTG experimental design, including furnace selection, growth time, melt stability, and ampoule geometry, and discuss future opportunities for transforming LTG from an empirical growth method into a more predictive crystal growth technique.

2026-07-16T14:14:31Z Comments are welcome Jiaqiang Yan Brenden Ortiz http://arxiv.org/abs/2607.15009v1 2026-07-16T13:56:15Z

Extending valleytronics from discrete points to continuous lines in momentum space transforms dispersionless bands into a controllable degree of freedom. Here we introduce ridge--spin--layer coupling (RSLC) in two-dimensional (2D) altermagnets, where a one-dimensional continuous line of dispersionless electronic states (a ridge) in momentum space locks to both spin polarization and atomic sublayer. This ridge-induced quenching of kinetic energy mimics flat-band physics, yet crucially, RSLC grants external control, allowing for layer-selective switching of ridge orientation in reciprocal space, spin-filtered transport in real space, and a distinct electric Hall response. Guided by collinear spin layer group symmetry, we identify three 2D candidate materials, namely Mg$_2$Mo$_2$(PO$_5$)$_2$, Ca(FeP)$_2$, and Mg$_2$V$_2$(SO$_5$)$_2$, each featuring a crossed-ridge structure with two ridges, one per spin channel and sublayer. Our work establishes ridgetronics as a controllable platform for direction-discriminating currents, bridging dispersionless bands with multifunctional device operation.

2026-07-16T13:56:15Z 7 pages, 4 figures Mu Tian Run-Wu Zhang Chaoxi Cui Zhi-Ming Yu Yugui Yao http://arxiv.org/abs/2607.15008v1 2026-07-16T13:54:35Z

We present non-equilibrium molecular dynamics simulations of lubricated sliding between rough, deformable surfaces under conditions representative of boundary and mixed lubrication. One aim is to reduce the gap between highly idealized simulations of smooth interfaces and real, rough, load-bearing contacts. Another aim is to determine whether favorable tribological properties of two-fluid lubrication reported for solvated hydrophilic-hydrophobic polymer-brush interfaces can also be realized in rough contacts without brushes. To this end, we compare aqueous (water), hydrocarbon ($n$-dodecane), which has a similar equilibrium viscosity to water at ambient conditions, and immiscible two-fluid lubrication under identical geometric conditions. For the single-component lubricants, the simulations reproduce established trends: Water shows stronger speed dependence but reduced load-bearing capacity than $n$-dodecane, despite their similar ambient viscosities. Beyond this expected behavior, the simulations reveal that the combination of strong confinement and large height gradients can cause plug flow and cavitation after asperity collisions. For a high-surface-tension liquid like water, cavitation provides a mechanism for abrupt shear-stress release observable on scales much exceeding the size of the cavity. The mixed lubricant exhibits the lowest friction and material transfer, while maintaining plug flow to the lowest sliding velocity. It is also the only system in which folding lips form, occasionally developing into transient wear particles at high speeds.

2026-07-16T13:54:35Z 57 Ref, 33 pages, 10 figures Shubham Agarwal Martin H. Müser http://arxiv.org/abs/2607.14994v1 2026-07-16T13:45:00Z

Prediction of material durability is both very important and very difficult. In many cases, material durability is measured by subjecting a sample to repeating oscillatory cycles (in shear or tension-compression) until it fails in either ductile or brittle fashion. Typically, the stress amplitude is denoted S, and the number of cycles N, so the resulting dependence is known as the SN-curve. For many materials, SN curve has been shown to obey the empirical Basquin's law, N = AS^(-m), where the prefactor A was a function of the temperature, load frequency, and sample history, and the power law m was a real number, usually between 3 and 12. Here, we derive the Basquin's law using a linearized version of the Long's plasticity model and demonstrate that within this framework, m = 3. We also derive the expression for the prefactor A. Finally, we show that our theory successfully describes experimental data for three amorphous polymers, PS, PMMA, and PVC.

2026-07-16T13:45:00Z 17 pages, 4 figures, 1 table Valeriy V. Ginzburg Oleg V. Gendelman Alessio Zaccone http://arxiv.org/abs/2607.14978v1 2026-07-16T13:30:52Z

Single-crystal diamond is a leading material platform for high-power electronics and solid-state quantum technologies, yet many device architectures require micrometer-scale membranes with deeply etched features, patterned from commercially available substrates. In this work, we demonstrate a complete through-etch of a 16 μm -thick NV-doped single-crystal diamond membrane using a single-layer SiO2 hard mask combined with a multi-step oxygen-based ICPRIE process. With a diamond-to-SiO2 selectivity of 15:1, this non-metallic mask strategy can achieve etch depths of few tens of μm with well-defined sidewalls, conserved surface roughness and negligible micromasking. Furthermore, we use the oxide layer that remains after etching to serve as the bonding surface in a subsequent integration step. The etched microstructures are transferred onto SiO2 substrates and bonded at room temperature using O2 plasma surface activation and a sodium silicate interlayer. The resulting siloxane film is optically transparent across the visible spectrum and introduces no detectable parasitic photoluminescence, preserving the optical readout of the embedded NV centers. Together, this deep-etch and room-temperature bonding process provides a scalable and contaminationfree route from bulk diamond membranes to diamond-on-silica heterostructures for integrated quantum photonics and sensing applications.

2026-07-16T13:30:52Z 12 pages, 5 figures R. Chembra Vasudevan A. Hammouti J. Le Pouliquen T. Batte P. Pirasteh Y. Dumeige P. Huillery http://arxiv.org/abs/2607.14972v1 2026-07-16T13:27:41Z

Using a combination of static and dynamic density functional theory simulations, we systematically investigated how phosphorus doping and oxygen vacancies on the CeO$_2$(111) surface influence the oxidation mechanisms of formaldehyde (HCHO). Our results reveal that P cations (P$^{5+}$) substitutionally replace Ce$^{4+}$ in the lattice, forming Ce$-$O$-$P bonds that reduce the band gap (from 2.26 eV to 2.09 eV) and generate localized Ce$^{3+}$ states through charge redistribution. This synergistic effect of P doping combined with oxygen vacancy strengthens HCHO adsorption by decreasing the adsorption energy from -0.62 eV on pristine CeO$_2$(111) to -2.65 eV on the defective P-doped surface. Importantly, P doping lowers the C$-$H bond cleavage barrier by 0.84 eV relative to pristine CeO$_2$(111), accelerating formaldehyde oxidation on the defective surface. In addition, the rapid desorption of CO$_2$ and H$_2$O ($τ\sim 0.59 s$ at 300 K) indicates weak product-surface interactions, which favor efficient catalyst regeneration during continuous operation. These findings highlight P-doped CeO$_2$(111) as a promising system for low-temperature HCHO oxidation and provide insights into the design of ceria-based catalytic materials.

2026-07-16T13:27:41Z Tarek Ayadi Mourad Debbichi Michael Badawi Fabien Pascale Adel Mesbah Sébastien Lebègue http://arxiv.org/abs/2607.14951v1 2026-07-16T12:59:35Z

Sulfur vacancy migration has a crucial impact on electronic transport and the functional behavior of MoS$_2$-based devices such as memristors and memtransistors. According to recent atomistic simulations, vacancy migration proceeds via cooperative, vacancy-assisted sulfur jumps, implying strongly correlated defect dynamics. Here, we investigate the collective behavior of sulfur-vacancy clusters in MoS$_2$ using kinetic Monte-Carlo simulations with transition rates derived from machine learning interatomic potential molecular dynamics simulations. We identify three transport regimes: At low concentrations, vacancies are immobile or confined within small clusters, whereas at high concentrations, classical diffusive transport with a constant diffusion coefficient is observed, and vacancies aggregate into anisotropically extended clusters. A well defined intermediate regime is characterized by clusters merging into a connected, fluctuating network with a concentration-dependent diffusion coefficient. This regime is characterized by a broad distribution of cluster sizes. The strong dependence of the vacancy diffusion coefficient on the average defect concentration provides new insights into the origin of memristive behavior observed in MoS$_2$.

2026-07-16T12:59:35Z Aaron Flötotto Benjamin Spetzler Martin Ziegler Erich Runge Christian Dreßler http://arxiv.org/abs/2607.14922v1 2026-07-16T12:40:35Z

We demonstrate the use of high-resolution spot-profile analysis low-energy electron diffraction to determine the mean grain size of plasma-enhanced chemical vapor deposition grown few-layer graphene on sapphire (Al$_2$O$_3$). The diffraction patterns exhibit broadened graphene spots, pronounced diffuse scattering, and azimuthally extended features, indicating finite crystallite size and rotational disorder. By analyzing the finite-size broadening of the specular (00) spot with an Airy-type diffraction profile, we determine a mean grain diameter of 3.7$\,$nm for the as-grown graphene layer. Post-growth annealing under ultrahigh-vacuum conditions increases the mean grain size to about 5.7$\,$nm and 6.8$\,$nm, respectively. These results establish SPA-LEED as a sensitive reciprocal-space method for quantifying the structural coherence of directly grown graphene on insulating substrates.

2026-07-16T12:40:35Z The following article has been submitted to Applied Physics Letters Niels Ganser Marko A. Kriegel Umut Kaya Jixi Zhang Rodney D. L. Smith Marika Schleberger Wolfgang Mertin Gerd Bacher Michael Horn-von Hoegen http://arxiv.org/abs/2511.18938v2 2026-07-16T12:01:34Z

Structural phase transitions generate complex microstructures that often govern material functionality, yet directly resolving their three-dimensional organisation in bulk samples remains challenging. Here we employ scanning three-dimensional X-ray diffraction to resolve the bulk microstructure of La$_{1.675}$Eu$_{0.2}$Sr$_{0.125}$CuO$_{4}$, a prototypical 1/8-doped cuprate in which structural and electronic heterogeneity is well established. We reveal remarkably broad tetragonal-like domain wall regions within the nominally orthorhombic crystal structure, and, upon cooling to 100 K, a fine microstructure of orthorhombic-like stripes embedded within the tetragonal matrix that has significant consequences for interpreting the interplay between structural and electronic heterogeneity in this class of materials. More broadly, this work establishes 3DXRD as a powerful approach for resolving bulk microstructures and understanding their role in emergent functionality.

2025-11-24T09:44:06Z Manuscript of 9 pages and 3 figures with supplemental file of 13 pages and 9 figures Evie Ladbrook Mark S. Senn Jon Wright http://arxiv.org/abs/2607.14849v1 2026-07-16T11:17:31Z

Reproducibility remains a major challenge in materials synthesis, particularly for nanomaterials whose properties are highly sensitive to experimental conditions. Here, we present a systematic review and meta-analysis evaluating the reproducibility of two widely used synthesis routes: the Turkevich method for gold nanoparticles (AuNPs) and the chemical vapor deposition (CVD) growth of MoS2. An adapted PRISMA-based protocol combined with a modified SPIDER framework was applied to assess methodological transparency, parameter reporting, and experimental consistency across the literature. More than 1,300 articles for each case study were retrieved from Scopus and Web of Science and systematically screened using structured checklists and a Python-based text classification algorithm validated against independent human reviewers. Despite the extensive literature and the widespread perception of these methods as reproducible, only a small fraction of studies rigorously addressed synthesis reproducibility. Critical experimental parameters were frequently underreported, and statistical analyses were rarely included, limiting inter-laboratory comparability and reproducibility. These findings demonstrate the value of systematic reviews and meta-analyses as tools for identifying reproducibility gaps and guiding the development of more transparent and reliable synthesis protocols in materials science.

2026-07-16T11:17:31Z 36 pages, 5 figures, 132 references Julia S. Correa Leandro V. Silva Nichollas G. G. Silva Cesar Raitz Alex S. Lima Daniel Grasseschi http://arxiv.org/abs/2606.16385v2 2026-07-16T10:24:21Z

Generating experimentally relevant amorphous structures via melt-quench molecular dynamics is prohibitively expensive at the first-principles level. Universal machine-learning interatomic potentials (uMLIPs) could accelerate such simulations, but their reliability under non-equilibrium conditions remains unclear. Here, we examine eight leading uMLIPs for generating amorphous IrO2, using this electrocatalytically relevant oxide as a diagnostic case. Under the conventional melt-quench protocol, all models yield unphysically expanded structures with densities of 1-4 g/cm3, far below the ab initio molecular dynamics (AIMD) reference value of 10.04 g/cm3. Comparisons against ab initio references show that accurate energies and forces alone do not ensure stable NPT dynamics; correct energy-volume responses and pressure predictions are also essential. We identify two practical remedies: pressure-targeted fine-tuning and a revised NVT-quench/NPT-equilibration protocol that avoids unphysical volume expansion without additional ab initio training data. Both recover IrO2 densities and local structures consistent with AIMD. Across 30 chemically diverse materials, the volume-expansion failure proves general, and the revised protocol substantially improves density predictions, reducing the AIMD-referenced MAE from 2.46 to 0.35 g/cm3. This work establishes practical validation criteria and simulation strategies for robust uMLIP-driven amorphous structure generation.

2026-06-15T08:17:17Z Shuwei Li Yuqi An Xingyu Guo Wenqiang Yang Zhenbin Wang http://arxiv.org/abs/2607.12960v3 2026-07-16T10:17:36Z

Plastic deformation during strain-rate-controlled spherical nanoindentation is governed by the coupled evolution of constitutive strain-rate sensitivity and deformation length scale, making the intrinsic influence of strain rate difficult to isolate experimentally. This coupling is investigated in unirradiated and neutron-irradiated single-crystal tungsten using spherical nanoindentation, atomic force microscopy, high-resolution electron backscatter diffraction (HR-EBSD), and crystal plasticity finite element (CPFE) modeling. Nanoindentation experiments were performed at strain rates from 3.2e-5 to 3.2e-3 per second. AFM and HR-EBSD quantified surface pile-up, residual lattice strain, and geometrically necessary dislocation (GND) distributions. A strain-gradient CPFE framework incorporating thermally activated slip, GND hardening, irradiation-induced obstacle hardening, and strain-dependent softening was calibrated using a single experimental condition and validated across all remaining strain rates without further parameter adjustment. The validated model was then used to independently vary strain rate and indentation depth. Simulations show that strain rate primarily controls the stress required for thermally activated plastic flow, whereas indentation depth governs plastic-zone evolution, pile-up, and GND accumulation. Irradiation increases obstacle strength and promotes deformation localization while remaining consistent with a common thermally activated mechanism. The framework also predicts the compression response of a polycrystalline cube, demonstrating transferability across loading conditions and length scales, providing a robust basis for constitutive modeling of irradiation-hardened materials under transient loading.

2026-07-14T16:57:43Z 70 pages, 12 figures Prashil S. Joshi Bethany Jim Chris Hardie Angus Wilkinson David EJ Armstrong Suchandrima Das http://arxiv.org/abs/2607.14795v1 2026-07-16T10:13:01Z

Phase stability in multicomponent solid solutions depends on configurational entropy beyond the ideal mixing limit, but capturing it together with vibrational entropy within the same atomistic framework remains challenging. Here, we extend non-equilibrium thermodynamic integration to composition-dependent transformations through an alchemical interpolation of the interactions, combined with Monte Carlo identity exchange moves and molecular dynamics that sample the vibrational and non-ideal configurational entropy along the integration path. We apply the framework to the Au-Cu binary alloy using Atomic Cluster Expansion potentials trained on density functional theory data using the LDA, PBE, and r2SCAN functionals, and construct composition-temperature phase diagrams directly from atomistic free energies. We find that explicit configurational sampling lowers the AuCu order-disorder transition temperature predicted by the ACE potential trained on LDA data from approximately 810 K to 710 K, closer to the experimental value of 683 K, and substantially widens the stability range of the solid solution. At the same time, the much larger sensitivity to the exchange-correlation functional shows that this level of agreement should not be interpreted as general predictive accuracy. Non-ideal configurational entropy must therefore be sampled explicitly, alongside a careful choice of functional, for a reliable atomistic description of binary phase diagrams.

2026-07-16T10:13:01Z Sarath Menon Marvin Poul Tilmann Hickel Jörg Neugebauer Ralf Drautz http://arxiv.org/abs/2607.14764v1 2026-07-16T09:47:53Z

The boson peak (BP), a universal vibrational anomaly of disordered solids, has been predicted but not systematically characterized in calcium silicate hydrate (C-S-H), the binding phase of hardened cement. Building on a preliminary terahertz survey, we characterize the BP across five Ca/Si ratios (0.5-1.7) using terahertz time-domain spectroscopy (THz-TDS) and low-temperature calorimetry, two probes of vibrational dynamics that complement the static picture of conventional structural methods. After Bruggeman correction for crystalline impurities, both probes locate the BP near 1 THz; they agree on frequency but diverge in intensity. The terahertz integrated spectral weight and the calorimetric Cp/T3 peak both fall monotonically with Ca/Si, whereas the apparent terahertz peak height is maximal at Ca/Si = 1.0, where damping is low and oscillator strength still substantial. This decoupling marks a structural crossover between silicate-chain depolymerization and interlayer calcium filling. From the BP we obtain a medium-range dynamical correlation length of order 1 nm (0.3-2 nm) and a coherent-potential elastic-heterogeneity parameter that decreases from gamma = 0.98 to 0.48 as Ca/Si rises; the Debye-normalized BP frequency (nu_BP/nu_D = 0.15-0.17) places C-S-H within the range reported for silicate glasses. Because gamma governs the distribution of energy barriers for local structural rearrangements, it provides a quantitative, composition-resolved descriptor relevant to the intrinsic creep and thermal transport of C-S-H, linking nanoscale vibrational dynamics to the macroscopic durability of concrete. The dual-probe boson-peak approach is transferable to other amorphous solids, including the supplementary cementitious materials of low-carbon cements.

2026-07-16T09:47:53Z Xiangyu Li Ying Chen Jipeng Luo Ya Chen Linhao Wang Lidan Tian Gan Ding Zeyu Lu Zhangli Hu Biqin Dong Yue Li Zongjin Li