Sensitivity of the As-Built Askaryan Radio Array to Ultra-High Energy Neutrinos

2026-05-05T20:02:36Z

The Askaryan Radio Array (ARA) is an ultra-high energy (UHE) neutrino observatory designed to detect the impulsive radio waves produced by relativistic particle cascades in the Antarctic glacial ice. Using a significantly enhanced simulation pipeline, which adds data-driven detector simulations and fully incorporates secondary particle production, we calculate the trigger-level acceptance of the entire array. We compare the resulting trigger-level sensitivity to constraints on the UHE neutrino flux from other detectors. Given its exposure from 2013 to 2023, we find that ARA achieves a world-leading sensitivity above about $10^{19}$ eV, depending on the details of the event selection used in a search. Moreover, we find that up to 13 neutrinos are predicted to have been observed in this period at trigger-level, assuming the most optimistic neutrino flux models. We show that observations of secondary particles account for up to 30\% of the total acceptance starting at $10^{19}$ eV, and we explore the potential signatures and implications of both multi-pulse (from direct and refracted pulses and/or from secondary particle interactions) and multi-station events. Finally, we comment on the implications of this study for the design of next-generation UHE neutrino experiments, in particular IceCube-Gen2 Radio.

Overview of the New Hubble Spectroscopic Legacy Archive

2026-05-05T18:03:32Z

The new Hubble Spectroscopic Legacy Archive (HSLA) provides coadded spectra of individual targets that have been observed with the Cosmic Origins Spectrograph (COS) and the Space Telescope Imaging Spectrograph (STIS) over their operating lifetime. HSLA uses data available in the Mikulski Archive for Space Telescopes (MAST). It automatically produces coadds whenever new data become publicly available or when there is newly recalibrated data. HSLA defines individual targets by their associated coordinates, accounting for proper motions, and uses SIMBAD, NED and the Phase II observing proposals to obtain astronomical classifications for each object. Coadded spectra are produced for each observing mode. In the case of COS far-ultraviolet observations there is one coadded spectrum for each lifetime position (LP). Additionally, a spectrum spanning the entire wavelength range covered by the observations is produced by abutting the spectra from a selection of individual modes. For each individual target, HSLA also provides a human-readable metadata file with key information that can be used in searches or for further exploration of the data. The HSLA project also makes the code used for coadding spectra publicly available along with several other tools (using Jupyter notebooks) for custom coaddition required in special cases. In this report we will describe the main components of HSLA and provide a brief description of how the data and metadata can be accessed.

Shaping the future of Global Interferometric Arrays: Imaging Strong Gravity and Magnetic Fields

2026-05-05T17:35:48Z

The observational validation of General Relativity (GR) has been propelled in recent years by recent breakthroughs in Very Long Baseline Interferometry (VLBI) augmented by ALMA. We explore ALMA2040 opportunities to transform these studies through greatly improved sensitivity and a multi-frequency approach. The focus will be on placing most stringent constraints on GR and alternative theories in the strong-gravity regime, and on understanding the formation and launching of relativistic jets.

NASA Exoplanet Exploration Program (ExEP) Science Gap List

2026-05-05T17:19:54Z

The Exoplanet Exploration Program (ExEP) is chartered by the NASA Astrophysics Division to carry out science, research, and technology tasks that advance NASA's science goals for exoplanets. The ExEP Science Gap List is a compilation of "science gaps", defined as either: 1) The difference between knowledge needed to define requirements for specified future NASA exoplanet missions and the current state of the art, or 2) Knowledge which is needed to enhance the exoplanet science return of current and future NASA exoplanet missions. It is annually updated and input is solicited from the exoplanet community via ExoPAG. Current gaps are: 1) Spectroscopic observations of the atmospheres of small exoplanets, 2) Modeling exoplanet atmospheres, 3) Spectral signature retrieval, 4) Planetary system architectures: occurrence rates for exoplanets of all sizes, 5) Occurrence rates and uncertainties for temperate rocky planets, 6) Yield estimation for exoplanet direct imaging missions, 7) Intrinsic properties of known exoplanet host stars, 8) Mitigating stellar jitter as a limitation to sensitivity of dynamical methods to detect small temperate exoplanets and measure their masses and orbits, 9) Dynamical confirmation of exoplanet candidates and determination of their masses and orbits, 10) Observations and analyses of direct imaging targets, 11) Understanding the abundance and distribution of exozodiacal dust, 12) Measurements of accurate transiting planet radii, 13) Properties of atoms, molecules and aerosols in exoplanet atmospheres, 14) Exoplanet interior structure and material properties, 15) Quantify and mitigate the impacts of stellar contamination on transmission spectroscopy for measuring the composition of exoplanet atmospheres, 16) Building the inventory of remotely observable exoplanet biosignatures and their false positives, 17) Understanding planet formation and disk properties.

ULTIMATE deblending I. A 50-band UV-to-MIR photometric catalog combining space- and ground-based data in the JWST/PRIMER survey

2026-05-05T15:53:36Z

Our understanding of the early Universe has long been limited by biased galaxy samples selected through various color criteria. With deep JWST infrared imaging, mass-complete galaxy samples can now be studied up to $z \sim 8$ for the first time. However, recent work has revealed systematic uncertainties in measuring physical properties of galaxies based solely on JWST/NIRCam and HST photometry, due to their limited wavelength coverage. This highlights the need for supplementary data, particularly in the rest-frame UV and near-infrared. Here we present the ULTIMATE-deblending project, which will eventually deliver self-consistent UV-to-Radio photometry for galaxies detected in deep JWST surveys, including both NIRCam and MIRI data. In this first paper, we release a 50-band photometric catalog spanning CFHT/U to JWST/MIRI F1800W, covering a total of 627.1 arcmin$^2$ across two JWST/PRIMER fields. We detail the reduction of JWST imaging data, the photometric procedures, and the SED-fitting methodology used to derive galaxy properties. Compared with photometry including only HST and JWST bands, the inclusion of deblended low-resolution photometry from ground-based telescopes improves the accuracy of photometric redshifts by $\sim$40%, while reducing the outlier fraction by $\sim$60%. This galaxy sample can serve as a key reference for statistical studies of galaxy formation and evolution in the early universe. The UV-to-MIR catalogs and JWST mosaics from the ULTIMATE-deblending project have been made publicly available.

Multipole Functions for Image Analysis II: Equal Area Weighting and Application to Supernova Remnant Images

2026-05-05T15:39:45Z

New basis functions for 2 dimensional (2D) image analysis with a circular boundary (referred to as multipole analysis) are derived which are equal-area weighted. We present open access Python code hosted by GitHub, with which users can apply the multipole analysis to images. The new multipole analysis is applied to a set of 28 supernova remnants (SNRs) which are selected to have both radio and X-ray images, and have been identified as Type Ia or Type CC. Each pair of SNR images (radio and X-ray) was convolved to the same spatial resolution prior to analysis. The resulting multipole radial powers and angular powers, from order 0 to 5, for a given SNR are different for different multipoles and for a given multipole are different between X-ray and radio images. The X-ray radial powers (for orders >0) are larger on average than the radio radial powers (more radial structure in X-rays than radio). The angular powers are smaller than the radial powers on average (more radial structure than angular structure). Comparing Type Ia and Type CC populations, the radial powers (for orders >0) are on average larger for Type CC than Type Ia for X-ray and radio images, with larger difference for X-ray images. The angular powers (for orders >0) are similar between Type Ia and Type CC for both radio and X-ray images.

The First Look of Gaia: Daily data quality and instrument health assessment with automated early warnings

2026-05-05T13:07:08Z

The ESA Gaia mission is a 10+ year astrometric whole-sky scan, demanding consistent data quality over the whole timespan of operations Aims. The Gaia First Look (FL) is a system whose aim is monitoring the data quality to identify problems, which includes early warning capabilities for potential upcoming issues. Methods. In order to achieve its goals, the Gaia FL implemented its own limited astrometric solution, and used the daily calibrations from other segments of the Data Processing and Analysis Consortium (DPAC), as well as the diagnostic data from the satellite itself, in order to obtain a complete picture of the situation of the Gaia satellite on a daily basis. This led to a short-term health and data quality check, but also to a broader overview of the longer-term trends and evolutions within the payload. Potential issues that were encountered were reported to other groups within DPAC for further analysis purposes. When required, ways to mitigate the problems were discussed, and implemented. Results. We show a number of findings by the Gaia FL concerning longer-term evolution, individual but common effects, as well as detrimental impacts, all of which occurred over the operational phase of the Gaia mission

A public dataset of Ariel simulated observations for developing exoplanetary atmosphere data reduction pipelines

2026-05-05T13:06:37Z

Detecting and characterising exoplanet atmospheres remains challenging because atmospheric signals can be comparable to residual noise and instrumental/astrophysical systematics. Spectral features span from a few ppm for small planets up to $\sim 10^3$ ppm for warm/hot giants, while high-quality JWST time-series spectroscopy typically reaches $\sim 10$--$50$ ppm (occasionally $\sim 100$--$200$ ppm in the presence of stellar variability or stronger systematics), making correlated noise across temporal and spectral dimensions a key limitation. With JWST delivering an increasing volume of high-precision transmission spectra, and Ariel set to extend this to a homogeneous survey of $\sim 10^3$ exoplanet atmospheres, robust benchmarking resources with known ground truth are essential to develop and validate data-driven (including ML-based) detrending approaches. As a major step towards this goal, we use ExoSim2 and TauREx to generate one of the most comprehensive public datasets based on the current payload design of the ESA Ariel mission, specifically intended to benchmark detrending algorithms. We also provide a deep neural network baseline for time-series reduction, and use it to highlight the limitations of ML based detrendng methods, i.e. the risks posed by dataset shift when observed distributions diverge from those of the training set, a scenario likely to arise in real observations. This dataset is featured in the Ariel Data Challenge 2024 on Kaggle and has been field-tested for robustness and simulation fidelity. By making these resources publicly available, we aim to support the community in developing, comparing, and stress-testing scalable and reliable methods for exoplanet transmission spectroscopy.

Differentiable Forward Modeling for Efficient and Accurate Shear Inference

2026-05-05T12:13:19Z

Forthcoming Stage-IV dark energy optical surveys, such as LSST, have the ambitious goal of measuring cosmological parameters at sub-percent precision. Realizing their full scientific potential requires very precise measurement of the cosmic shear signal and control of corresponding systematics. In this work, we present a modern implementation of the Bayesian shear inference framework in Schneider et al. (2014), in the case that the PSF and sky background are known. This framework automatically propagates the pixel-noise measurement error from each galaxy into the final shear estimate, and thus requires no external calibration to handle noise bias. As a first application of this new implementation, we infer the cosmic shear posterior from simulated images consisting of isolated exponential galaxies with LSST-like levels of shape and pixel noise. In this simplified scenario, we estimate the absolute multiplicative bias $|m|$ of our approach to be below $0.9 \times 10^{-3} \, [3σ]$ when the intrinsic distribution of galaxy properties is known, and below $1.3 \times 10^{-3}\, [3σ]$ when these distributions are inferred alongside shear. Both results are within the LSST requirement of $|m| < 2 \times10^{-3}$. Additionally, we make progress towards the algorithm's computational feasibility in the context of modern wide-field surveys, where billions of galaxies must be processed, by leveraging differentiable forward models of galaxies, gradient-based samplers, and GPUs. Our final galaxy-fitting MCMC produces $300$ effective samples of galaxy properties in $0.45$ seconds per galaxy using a single A100 GPU. In the future, we seek to generalize our algorithm to handle selection, detection, and model shear biases so it can be applied to real survey data.

Pulsar timing array analysis in a Legendre polynomial basis

2026-05-05T10:52:08Z

We use Legendre polynomials, previously employed in this context by Lee et al., van Haasteren and Levin, and Pitrou and Cusin, to model signals in pulsar timing arrays. These replace the (Fourier mode) basis of trigonometric functions normally used for data analysis. The Legendre basis makes it simpler to incorporate pulsar modeling effects, which remove constant-, linear-, and quadratic-in-time terms from pulsar timing residuals. In the Legendre basis, this zeroes the amplitudes of the the first three Legendre polynomials. We use this basis to construct an optimal quadratic cross-correlation estimator $\widehatμ$ of the Hellings and Downs (HD) correlation and compute its variance $σ^2_{\widehatμ}$ in the way described by Allen and Romano. Remarkably, if the gravitational-wave background (GWB) and pulsar noise power spectra are (sums of) power laws in frequency, then in this basis one obtains analytic closed forms for many quantities of interest.

Characterization of telecentric dual-etalon Fabry-Pérot systems from observational data. Properties of the CRISP2 instrument at the Swedish 1-m Solar Telescope

2026-05-05T09:47:01Z

Imaging Fabry-Pérot Interferometer (FPI) observations are commonly used in solar physics to infer physical parameters in the photosphere and chromosphere through modeling of the observations. Such techniques require detailed knowledge of the spectral instrumental profile in order to produce accurate results. In this study we present a method to characterize the spatial variation of parameters of dual-etalon FPI instruments mounted in telecentric configuration: spatially-resolved cavity separation and reflectivities of both etalons, as well as the prefilter variation across the field-of-view. Here, we aim at characterizing the field-of-view dependence of the parameters of the new CRISP2 FPI. We have implemented a forward model of the FPI instrumental degradation combined with a template average quiet-Sun spectrum at disk center in order to model two sets of observational data. Our method does not require any change in the optical setup or the utilization of external sources of illumination. We assess the validity of several functional forms in the calculation of the FPI transmission profiles. Our results show that (generally) the inclusion of the secondary transmission peaks at 1 FSR and a detailed estimate of the prefilter curve is necessary to obtain accurate values of both etalon reflectivities. Our results show that the cavity separation of CRISP2 is very flat, with an RMS variation below 2 nm over the entire field-of-view for both etalons. Reflectivity RMS variations are 0.4% and 0.3% for the primary and secondary etalons at 617.3 nm. The methods described in this paper are relevant for the characterization of present and future FPI instruments and we have made them publicly available to the solar community.

Iterative Poisson Solvers for Self-gravity with the GPU Code Astaroth

2026-05-05T09:36:58Z

We present the development and benchmarking of Poisson solvers for graphics processing units (GPUs). Implemented in the Astaroth platform, the solvers feature high computational efficiency. We present novel combinations of discretizations and smoothers and document practical and performance-focused implementations aimed at reducing time-to-solution for self-gravitating systems. We describe the solver architectures and validate their accuracy against known analytic solutions. We measure convergence and timing per iteration for various solver algorithms, including conjugate gradient, successive overrelaxation, and multigrid in Cartesian coordinates, along with biconjugate gradient stabilized in spherical coordinates. We also couple the solvers to the Astaroth hydrodynamics to simulate a classic time-dependent problem in star formation, measuring accuracy and time-to-solution, for self-gravity on three-dimensional structured grids. Our results demonstrate that the solvers achieve performance similar to other algorithms implemented in Astaroth, and provide a solid foundation for integration into production-scale astrophysical simulations.

Neural Posterior Estimation of Terrain Parameters from Radar Sounder Data

2026-05-05T08:41:02Z

Radar sounders are electromagnetic instruments that can probe deep into the subsurface of Earth and other planetary bodies by processing the echo of transmitted radar waves. Conventional approaches for analyzing such data rely on approximate assumptions and often produce point estimates that ignore parameter correlations as well as galactic and measurement noise. We propose a simulation-based inference approach to terrain parameter inversion from radar sounder data, where synthetic observations from a GPU-based simulator are used to train a neural network-based density estimator for neural posterior estimation (NPE). By explicitly conditioning on reference surface assumptions, the proposed framework allows systematic evaluation of posterior robustness to reference surface variability. We demonstrate that our NPE model is well calibrated on simulated data and transferable to real Mars radar profiles, where we analyze terrain parameters using literature-informed reference values.

Identification and characterization of 15265 super-Nyquist frequencies in 1309 δ Scuti stars from Kepler photometry

2026-05-05T08:38:04Z

The frequency of pressure (p) mode in $δ$~Scuti stars can exceed the Nyquist limit of \textit{Kepler} long-cadence photometry. {These 'super-Nyquist frequencies' (SNFs) are observed as 'reflected' peaks at lower frequencies, i.e., they are Nyquist aliases that pose} a threat to asteroseismic diagnostics. Their impact on $δ$~Scuti p modes has yet to be comprehensively explored. We performed a systematic survey to search for SNFs in 1,838 \textit{Kepler} $δ$~Scuti stars through a novel technique based on sliding Lomb-Scargle periodogram, identifying 15,265 confirmed SNFs in 1,309 stars, from a total of 259,883 frequencies. We observe that the total number of detected frequencies per star remains featureless across the $δ$~Scuti instability strip; however, young stars pulsate in higher frequencies and so have significantly more SNFs on average. Both the number and the rate of SNFs diminishes accordingly as $δ$~Scuti stars become more evolved, which is consistent with both observation and stellar models. Furthermore, our method detects a greater fraction of modes as SNFs at higher frequencies, rising from approximately 1\% at 20 $μ$Hz to 23\% at the Nyquist limit. The rate of underdetection is highest amongst low-amplitude modes. The SNF modulation patterns can be well distinguished from phase modulations induced by binarity or nonlinear mode interactions. We provide a frequency catalog for future asteroseismic studies of $δ$~Scuti stars, wherein we identify each peak as being real or an alias, enabling further investigations into regular patterns of pulsation modes, linear combination frequencies, and theoretical modeling.

Mitigating effects of telescope jitter through differentiable forward-modeling

2026-05-05T07:28:53Z

Instabilities in telescope pointing, commonly referred to as jitter, introduce image degradation that can compromise the accuracy of critical scientific observables. This work presents a differentiable forward-modeling approach to both understand and mitigate the impact of jitter. We apply dLux -- a differentiable optical simulation framework built in the JAX numerical simulation framework -- to model the blurring effects of jitter on the final image. We categorize jitter into low-, medium-, and high-frequency regimes with respect to the camera frame rate and build simple jitter models based on its manifestation on the detector. The forward-model approach proves effective for low- and high-frequency regimes, but the inherent unpredictability of medium-frequency jitter may lead to model misspecification. As a test case we apply these models to the TOLIMAN mission, a forthcoming CubeSat telescope dedicated to detecting nearby Earth-analogue exoplanets through high-precision astrometry. Using Fisher information analysis, we quantify the effect of jitter on TOLIMAN's primary science observable -- the angular binary separation of the Alpha Centauri AB binary components. We find model misspecification does not introduce a systematic bias on the recovered binary separation except when fitting a one-dimensional jitter model to a two-dimensional motion, hence we recommend the use of a two-dimensional model. The forward-model approach offers a generalized method applicable to other telescope systems, including ongoing work with JWST's NIRISS instrument. This approach represents a significant step toward delivering higher accuracy measurements at modern observatories as demands on precision continue to rise.