MOSES -- The MONET Star and Exoplanet Spectrograph

2026-06-05T04:29:09Z

We introduce MOSES, the new High-Resolution Echelle Spectrograph designated for the 1.2m MONET telescope at McDonald Observatory, Texas, USA. The science drivers are radial velocity experiments and activity monitoring in Sun-like stars. Set for installation in the final quarter of 2026, MOSES features a white pupil design and aims for a spectral resolution greater than 80,000 over the 380-680 nm wavelength range. It incorporates a pixel sampling rate of 3.5 and uses two fibers to facilitate a simultaneous calibration mode. Encased within a vacuum vessel and operating in a temperature-stabilized environment, MOSES is expected to achieve a radial velocity precision below 2 m/s, aided by a Fabry-Pérot etalon calibration system. This paper outlines the implementation of the fiber injection unit, the optical layout of the spectrograph, and the present status of the various subsystems under development.

The MICADO first light imager for the ELT: eliminating vibrations and excessive earthquake-loads on specific subsystems

2026-06-05T04:28:52Z

Ensuring earthquake resilience is paramount for the upcoming Extremely Large Telescope (ELT). Instruments positioned on the ELT's Nasmyth platform are anticipated to endure substantial seismic accelerations, peaking at 3.6g in specific scenarios. These instruments have to be designed not only to survive such events but also to only require minimal repairs for sustained optimal functionality. This paper presents our approach to mitigate the dynamic forces impacting the rotary platform. This platform hosts various critical components, including cryogenic control units and mosaic detector control systems, essential for the operation of MICADO in its mechanical de-rotating motion. Furthermore, this paper tackles the challenge of minimizing instrument-induced vibrations affecting the telescope's structure. Given that the ELT's optical system, composed of 798 segments, operates very similar to an interferometer, maintaining an extremely stable wavefront is crucial - a key insight learned from the Very Large Telescope Interferometer (VLTI). Our focus is on identifying potential sources of vibration within specific frequency ranges where the telescope demonstrates increased sensitivity. We will explore strategies for mitigating these vibrations to maintain a wavefront error below 50nm.

Investigating the Unresolved Binary Population in Gaia DR3 Using Multi-Wavelength Photometry

2026-06-05T02:56:37Z

The Gaia DR3 and Non-Single-Star (NSS) catalogs are currently the definitive sources for binary systems (Gaia Collaboration 2023). While this affords an invaluable asset to the astronomical community, there are suspected limitations. To address these constraints, we introduce a filtering regime that can be applied to raw data. This study introduces the "Triple Constraint" framework for use on Gaia DR3 data through the application of multi-wavelength cogent evidence. Using Topcat, we cross-matched the WDS Supplement with the Gaia DR3, 2MASS, and Pan-STARRS catalogs. The derived "Base-sample" (N = 199,786) and "Quad-sample" (N = 120,418) provide the basis for the examination employed to establish systemic limits within the Gaia single-star model. To verify the results and eliminate any bias introduced by employing the WDSS as the basis for the Base and Quad-samples, we exploited an independent sample of Gaia-2MASS cross-matched audit stars, the "Audit-sample" (N = 22,371). Only stars selected at high northern declinations (delta > 60 degrees) were employed for this sample to avoid potential distortions resulting from crowding. All of these samples manifested a -0.75 magnitude offset, indicating the presence of two stars of equal magnitude, creating a "Detection Gap" across all populations. We conclude, reinforced by a peer-reviewed independent external spectroscopic study, that a 7% floor of global sensitivity exists, representing a limitation of the Gaia pipeline. This suggests that local stellar mass density models require a quantifiable correction to accurately reflect the local baryonic mass budget.

Constraining the inclination of binary system orbits with the astrometric excess noise from Gaia DR3

2026-06-05T02:14:24Z

Orbital inclination is crucial in determining the binary mass. The astrometric excess noise contains the orbital motion information, which can be used to constrain the inclination. We aim to constrain the orbital inclination of a binary system by combining radial velocity measurements with the astrometric excess noise from the Gaia DR3 solution. The astrometric excess noise is directly related to the orbital parameters. For a binary system with a radial velocity solution, it can be treated as a function of the orbital inclination. Using the Gaia nominal scanning law and the estimated centroid uncertainties, we simulate Gaia astrometric epoch observations to reproduce the expected excess noise. By sampling different inclinations and comparing the resulting simulated excess noise with the value reported in Gaia DR3, we can constrain the inclination to a specific interval. We have developed a method to constrain the orbital inclination within a specific range, enabling a more accurate determination of the binary mass, particularly for spectroscopic binaries. Internal and external validations demonstrate the robustness of the method, although certain limitations remain. It is most reliable for systems exhibiting a strong astrometric signal of binary motion, while caution is required when applying it to binaries with weak astrometric wobbles or poorly sampled orbits.

Full-spectrum infrared fingerprinting: A transformative AI paradigm for interstellar polycyclic aromatic hydrocarbons

2026-06-05T01:20:07Z

In the era of high-sensitivity infrared (IR) astronomy, traditional manual diagnostics are no longer sufficient to harvest the complex physical insights hidden within interstellar spectra. We introduce a machine learning paradigm that bypasses the limitations of empirical band ratios by treating the complete IR spectrum of polycyclic aromatic hydrocarbons (PAHs) as a high-dimensional fingerprint. Using a random forest classifier trained on over 23000 spectra, we achieve a robust F1-score of 0.963 across 12 size and charge categories, maintaining high performance on unseen molecular mixtures. Interrogating the model's decision-making process reveals that PAH size diagnostics are charge-dependent. Neutral PAHs are traced by C-H modes, while ionized species rely on 6-8 micron C-C morphology; however, the 12.5micron feature remains a versatile tracer across multiple charge states. This AI-driven paradigm redefines our understanding of IR signatures, providing a transformative lens to probe the chemical complexity of the interstellar medium.

A Compact, Ultra-High Resolution VIPA Spectrograph for Solar Spectroscopic Observations: Astrocomb Characterization and First Light

2026-06-05T00:41:41Z

We present a compact, high spectral resolution prototype spectrograph based on a Virtually Imaged Phased Array (VIPA), which is designed for solar spectral observations. This fiber-fed instrument has a size of only 53 $\times$ 20 $\times$ 18 cm$^3$. Wavelength calibration using an astrocomb ($f_{\text{rep}}=25$ GHz) established an operational bandpass of 592.76--657.07 nm and revealed an asymmetric instrumental profile. A Fano-Lorentz product function provides a significantly better fit to this profile than a Gaussian. The measured spectral resolution ranges between 290,000 and 340,000 across the band. Initial on-sky validation at the New Vacuum Solar Telescope (NVST, Yunnan Observatories) successfully demonstrated the prototype's capabilities: clear detection of solar five-minute oscillations ($\pm 300 \, \text{m s}^{-1}$) in the \ion {Fe}{1} 6280.57 Å~ line, resolution of magnetic broadening in sunspots using the \ion{Fe}{1} 6173.34 Å~ line, and the first ground-based definitive identification of the faint \ion{Si}{1} 6560.57 Å~ line within the H$α$ band. These results validate the VIPA as a promising platform for high spectral resolution solar spectroscopy. Its compact design and performance directly support future applications in multi-object solar studies, high spectral resolution observations for time-domain astronomy, including exoplanet detection, and potential space-borne instrumentation.

PyCBC Live Search for Compact Binary Mergers in Advanced LIGO and Virgo's Fourth Observing Run

2026-06-04T20:44:12Z

PyCBC Live is a low-latency search pipeline that identifies gravitational waves from compact binary coalescences and provides alerts for electromagnetic follow-up. This paper presents improvements to PyCBC Live that were implemented for the fourth observing run (O4) of the LIGO-Virgo-KAGRA network, which operated from May 2023 to November 2025. The ranking statistic was enhanced to incorporate time-dependent background modeling using data quality streams and daily updates of the noise model. Follow-up capabilities were improved through refined probability of astrophysical origin calculations, optimized SNR recovery with reduced computational cost, and a method to incorporate Virgo as a sky-map-only detector. An Early Warning search was implemented to detect binary neutron star and neutron star-black hole systems before merger, providing pre-merger alerts with a pipeline latency of 2.5-3.5 seconds and warning times up to 60 seconds before coalescence. The autogating procedure was extended to apply to the full strain buffer rather than individual analysis segments, improving rejection of loud and rapidly successive glitches. Performance validation using the Mock Data Challenge showed sensitivity improvements of factors of 1.7 to 2.3 for the coincident search depending on source mass at an inverse false alarm rate of 10 years, and factors of 1.3 to 1.7 for the single-detector search. For injections in two-detector time, the O4 configuration identified 1979 of 2495 injections with a decisive SNR greater than 6 at a false alarm rate below one per year (79.3%), compared to 1262 (50.6%) with the O3 configuration. For injections in single-detector time, the O4 configuration identified 218 of 1174 injections (18.6%), compared to 170 (14.5%) with the O3 configuration. The search maintained a median latency of 15.94 seconds from merger to candidate upload.

Where Not to Look: A Parametric Avoidance Model for SETI Target Selection

2026-06-04T20:14:35Z

We present a simple, rule-based filter for SETI target selection that flags stars unlikely to host complex life and produces an audit-ready exclusion catalog. Using seven stellar parameters, including age, metallicity, and multiplicity, the model excludes roughly half of a 1.74 million-star Gaia DR3 sample, retaining 777,835 high-priority targets, mainly K dwarfs and quiet M dwarfs. Age and metallicity dominate the rejections. Importantly, using Gaia's age upper bounds instead of point estimates saves 355,086 stars from exclusion. A comparison of empirical and synthetic proxies shows that while the overall exclusion rate is robust, individual target assignments change significantly; for instance, the commonly used RUWE indicator flags 2.7x more binaries than Gaia's own non-single-star flag. Cross-matching with the Breakthrough Listen target list reveals a 56.5% exclusion rate, highlighting the complementary nature of habitability-driven and proximity-driven surveys. The catalog, pipeline, and a generalized community tool are publicly available.

Low Level RF and Timing System Design for the Cool Copper Collider

2026-06-04T18:27:58Z

The Cool Copper Collider (C3) is a linear accelerator (LINAC) concept based on compact, high gradient, and normal conducting accelerator technology to support Higgs boson studies at 250 GeV and 550 GeV center of mass. The C3 accelerator is ten kilometers in scale and consist of 2,200 RF stations for 550 GeV center of mass. To maintain the stringent beam quality required by the collider across the LINACs, each of the cavities has a dedicated low-level RF (LLRF) system to stabilize the phase and amplitude of the field in the cavities from pulse to pulse and to compensate the fluctuation of the RF field within each pulse introduced by the beam loading process. To meet the design goals of being compact and affordable for future accelerators, we have designed the next generation LLRF (NG-LLRF) with a higher integration level based on radio frequency system-on-chip (RFSoC) technology. The NG-LLRF system samples RF signals directly and performs RF mixing digitally. The NG-LLRF has been characterized in loopback mode to evaluate the performance of the system and has also been tested with a standing-wave accelerating structure, a prototype structure for the C3 with peak RF power level up to 16.45 MW. This paper will focus on introducing the LLRF system design and timing system for C3 and the current NG-LLRF design. The high-power test results at different stages of the test setup with several pulse modulation schemes, including square pulse, pulse with phase reversals, and pulse trains, will be summarized, analyzed, and discussed.

The short and long of iPhoton science for a boosted Hubble

2026-06-04T18:00:01Z

Boosting the Hubble Space Telescope (HST) will provide unique opportunities to carry out precursor science for the Habitable Worlds Observatory (HWO). Chief among them are science cases for determining the properties of star forming galaxies that contribute to creating and sustaining the universe in a mostly ionized state. The farUV and nearUV spectroscopic capabilities of the Cosmic Origins Spectrograph (COS) and the Space Telescope Imaging Spectrograph (STIS) are unique and unlikely to be replicated in the near future. Here we describe the benefits of a deep panchromatic spectroscopic effort to answer questions concerning the shape of the rest frame ionizing radiation escaping from star forming galaxies at modest redshift, capture crucial missing spectral regions, and explore whether their star formation histories are truly similar to the LyC leakers responsible for initiating and later sustaining the mostly-ionized-state of the universe. An observing program emphasizing multi-orbit observations, unencumbered by HST orbit competition and freely accessible to the wider ionizing photon (iPhoton) community, will catalyze crowd-sourced answers to these questions and offer a lower operating cost price point.

Gaussian Process Latent Factor Regression for Low-Data, High-Dimensional Output Problems

2026-06-04T18:00:00Z

In the sciences, regression tasks often require predicting high-dimensional outputs from few training examples. Multi-output Gaussian processes excel in low-data regimes but typically struggle with high-dimensional outputs. Compress-then-predict pipelines such as PCA-GP (principal component analysis plus Gaussian process regression) handle high dimensionality, but rely on bases optimized for reconstruction rather than prediction. To address this gap, we propose a model that represents each output as a linear-Gaussian decoding of a low-dimensional latent state drawn from a Gaussian process prior. By analytically marginalizing the decoder weights, we couple compression and prediction in a single objective that scales to high-dimensional outputs. We refer to this model as Gaussian process latent factor regression (GPLFR). We demonstrate GPLFR by building the first spatially resolved emulator of global climate models for rocky exoplanets.

MESAlab: A Python pipeline for MESA grid processing with integrated GYRE/MESA-RSP execution

2026-06-04T15:50:40Z

Modules for Experiments in Stellar Astrophysics (MESA) is a widely used open-source code for modeling stellar evolution. Many applications of the code rely on large computational grids containing thousands of models, which can be time-consuming to analyze. The mesalab package was developed to automate this post-processing. This Python-based, modular pipeline supports the analysis of large MESA grid outputs and can identify selected evolutionary features, such as the blue loop phase of the evolution of classical Cepheids. The pipeline can automatically prepare input files for and launch MESA-RSP and GYRE to investigate the pulsation properties associated with these evolutionary phases. The pipeline also includes tools for visualizing evolutionary tracks, including Hertzsprung-Russell diagrams and Gaia color-magnitude diagrams.

Sensitivity Limits and Operational Threshold Calibration for DINOv2-based Gravitational-Wave Glitch Characterization: A Strain-Domain Mock Data Challenge on LIGO O4a

2026-06-04T14:41:36Z

We present a Mock Data Challenge (MDC) to characterize the sensitivity limits of the gravi-signal-ml pipeline (Cirfeta 2026) for unsupervised gravitational-wave glitch detection. Strain-domain synthetic injections of eight morphological families into public LIGO O4a L1 data reveal two threshold-dependent sensitivity regimes. With a session-adaptive dynamic threshold (tau_dyn = mu_bg - 2.5 * sigma_bg), the pipeline recovers visually anisotropic morphologies (Butterfly, ZSweep) at matched-filter SNR >= 70, reaching Recall = 1.0, though the False Positive Rate (FPR) remains uncontrolled across sessions. Characterization of the full O4a embedding distribution (N = 188,142 segments) reveals extreme non-Gaussianity (skewness = -4.12, excess kurtosis = 15.38, Shapiro-Wilk p-value near 0), with the left tail best modeled by a Generalized Extreme Value (GEV) distribution. Under a statistically rigorous operational threshold (tau_op = 0.874) calibrated at the empirical 5x10^-5 quantile (FPR < 0.01%), the MDC yields Recall = 0 for all eight morphologies at all tested SNR levels, including narrowband structures (HarmonicComb, NarrowChirp) and impulsive transients (AsymBlip) at SNR up to 430. We trace this insensitivity to the global average pooling of the DINOv2 [CLS] token, which dilutes signals occupying a small fraction (<5%) of the spectrogram's 37x37 patch grid. The null result of Cirfeta (2026) is conditionally reinterpreted: it confirms the absence of novel macro-structures but cannot exclude localized micro-structures. These findings provide a quantitative roadmap for next-generation ViT-based pipelines using patch-level scoring and multi-scale windowing.

gr8stars II : judgement day for spectroscopic parameter model systematics

2026-06-04T14:39:53Z

Many areas of astrophysics, including exoplanetary studies, rely on precise and accurate stellar parameters. This demands that uncertainties on these parameters truly reflect all biases and systematics. Within this second work of the \texttt{gr8stars} collaboration, we take a set of 585 bright FGK dwarfs with high resolution, high signal-to-noise ratio spectra from the SOPHIE spectrograph. We determine stellar effective temperature, surface gravity, and metallicity using five different spectroscopic methods for each star, with an additional method used for comparisons. We find a typical scatter of 76 K in \teff, 0.14 dex in \logg, and 0.07 dex in \feh. These deviations are significantly larger than the average precision error on these parameters. We furthermore use isochrone fitting to determine mass, radius, and age for all 585 stars, using input from all results. We use the radii determined by SED fitting in the first \texttt{gr8stars} paper as a comparison to our isochronal radii from this work, in addition to comparing the isochronal \logg to spectroscopic \logg. The scatter in mass and radius from the use of different spectroscopic methods is investigated and propagated to exoplanetary parameters. The induced fractional uncertainties in planetary radius ($\lesssim$ 3 \%) and mass ($\lesssim$ 5\%) are found to be below those typically found in the literature. We estimate a lower limit on planetary equilibrium temperature fractional uncertainty of $\approx$ 4\%, a noise floor that is currently not sufficiently represented in the literature.

Hub-Aware Hybrid Search: Accelerating the Locally Aligned Ant Technique

2026-06-04T14:04:15Z

Finding manifold structures in noisy and high-dimensional point clouds is a challenging but important problem. In astronomical observation survey and simulation data the detection of filaments, streams (1D), walls (2D) and clusters (3D) gives rise to deeper understanding of the evolution of our universe. The Locally Aligned Ant Technique (LAAT) uses biologically inspired agents to efficiently recover faint and multidimensional structures. However, very dense hubs (e.g. nodes or globular clusters) dominate the ants' activity, creating unnecessary computational overheads. In this paper we propose a two-stage solution. First a fast preprocessing step locates the hubs and replaces them with a tailored likelihood model. Subsequently, a mixed likelihood-pheromone strategy guides the ants to efficiently bridge the dense regions. We demonstrate improvements in detection efficiency and robustness of LAAT with synthetic and a large-scale astronomical N-body simulation of the cosmic web.