Scattered light noise at LIGO Livingston Observatory during O4

2026-05-13T21:49:46Z

Scattered light is one of the most common sources of noise in the LIGO gravitational wave detectors. Light scattering is a highly non-linear process through which motion at low frequencies gets up-converted and creates noise in a higher frequency band in the detector data. From the beginning of the fourth observation run, many glitches appeared in the data of LIGO Livingston detector in the frequency range 10-40 Hz, and the morphology of these glitches suggested that they were produced by scattered light. From our analysis, we identified two different populations of scattered light glitches, one group having higher SNR than the other. The glitches of the high- SNR group were solely modulated by microseismic ground motion (ground motion in 0.1-1.0 Hz) and in this paper, we present models of possible coupling mechanisms for these glitches. We also present results of a statistical correlation analysis based on our models, which indicates that the microseismic ground motion at the corner station along the X direction is the one most correlated with the noise which create these high SNR glitches. After installing baffles very close to the test mass mirrors, we have noticed a significant reduction in the rate and SNR of these glitches. The low-SNR glitches were primarily modulated by high frequency (10-30 Hz) vertical ground motion at the corner station, and this motion was coupling through a specific vacuum chamber at the corner station. After installing an additional seismic isolation platform in that vacuum chamber, these glitches have disappeared.

Results of ten years of UCLA SETI searches with the Green Bank Telescope

2026-05-13T19:19:07Z

We have been conducting a search for narrowband radio signals with the L-band receiver (1.15-1.73 GHz) of the 100 m diameter Green Bank Telescope (Margot et al., 2023). So far, we have captured radio emissions from 70,000+ stars and planetary systems in the ~9 arcminute beam of the telescope. Our data-processing pipeline has a demonstrated 94%-99% efficiency for the detection of narrowband signals across the full range of frequency drift rates (+/-9 Hz/s). All 100 million candidate signals detected to date were either automatically (99.5%) or visually (0.5%) confirmed to be anthropogenic in nature. These results allow us to place stringent limits on transmitter prevalence: at the 95% confidence level, the fraction of stars within 20,000 ly that host a transmitter that is detectable in our search (EIRP > 5e16 W) is <6.3e-5. Our most interesting signals have been uploaded to a citizen science platform (http://arewealone.earth), where 40,000+ volunteers to date have contributed insights and classifications. We are using artificial intelligence (AI) to accelerate our search, automatically excise radio frequency interference, and improve signal detection. UCLA SETI research has involved ~200 undergraduate and ~20 graduate students so far.

Deriving volume density profiles of filaments from observed surface densities

2026-05-13T18:21:02Z

Accurate characterization of filamentary structures in star-forming clouds is essential for understanding star formation. Traditional methods fit observed surface density profiles $Σ(r)$ with slope $γ$ and width $H$ using the Plummer function, assuming $β=γ+1$ and $h\approx H$ for the volume density slope and width. These assumptions break down for shallow profiles, with the slope and width relations deviating progressively more for compact and extended filaments, respectively. We present a new fitting method that explicitly accounts for finite cylindrical geometry and establishes self-consistent empirical relationships between the parameters of $Σ(r)$ and those of the volume density profile $ρ(r)$ with slope $β$ and width $h$. The method was validated on model profiles and applied to selected filaments in the California molecular cloud. The slope difference $δ\equivβ-γ$ falls below unity for shallow ($β\lesssim 2$) and compact profiles; $h$ and $H$ can differ by over an order of magnitude for extended filaments with shallow slopes. Accurate parameter recovery requires high resolvedness $R\equiv H/O\gtrsim 10$ (where $O$ is the beam width); at lower resolvedness, slopes are severely overestimated and filaments remain unresolved even when $H\gg O$. The traditional Plummer function yields systematically overestimated slopes. Accurate deconvolution requires a priori knowledge of the true parameters, creating a fundamental circular problem whose only robust solution is obtaining sufficiently high angular resolution. Current far-infrared observations typically lack sufficient resolution, and some previously reported filament properties may require reinterpretation.

Rapid and robust simulation-based inference for kilonovae

2026-05-13T18:01:32Z

With the next generation of both electromagnetic and gravitational wave observatories beginning to come online, rapid analysis methods for kilonova data are becoming increasingly important in astronomy. Traditional Bayesian parameter estimation using Markov chain Monte Carlo (MCMC) is time-consuming and relies on explicit likelihood approximations that can break down when modeling uncertainties are significant. We develop a simulation-based inference (SBI) framework for kilonova parameter estimation using density-estimation likelihood-free inference. The framework uses a Gaussian process emulator trained on $\sim1300$ radiative transfer simulations generated with the POSSIS code. We demonstrate that SBI provides a rapid alternative to MCMC for inference with emulators or approximate likelihoods that is robust to emulator uncertainty and likelihood misspecification. On simulated data, the SBI method accurately recovers injected parameters and produces posterior predictive light curves consistent with the data, but the MCMC posterior recovery suffers from systematic bias caused by likelihood misspecification. When analyzing AT2017gfo, the SBI and MCMC methods yield similar light-curve predictions but different posterior distributions, with a subset of the MCMC posteriors piling up at prior boundaries. The likelihood in the MCMC fails to capture the non-Gaussian, correlated structure of the emulator uncertainty, but SBI learns the posterior directly from forward simulations that include the full predictive distribution. Once trained, the SBI framework generates $\sim2\times10^4$ posterior samples in seconds.

From DES to KiDS: Domain adaptation for cross-survey detection of low-surface-brightness galaxies

2026-05-13T17:58:55Z

Low-surface-brightness galaxies (LSBGs) are vital for understanding galaxy formation, but their diffuse nature makes them challenging to detect. Upcoming large-scale surveys are expected to uncover large numbers of LSBGs, requiring robust automated methods to identify them across heterogeneous datasets. As a precursor to the Legacy Survey of Space and Time (LSST) and Euclid, we explore domain adaptation techniques for cross-survey LSBG identification. Using models trained on the Dark Energy Survey (DES), we search for LSBGs in the Kilo-Degree Survey Data Release 5 (KiDS DR5). We used an ensemble consisting of one convolutional neural network (CNN) and two transformer models trained on DES cutouts and applied to KiDS DR5 imaging data. Structural parameters were estimated with galfitm, and photometric redshifts and stellar population properties were estimated through spectral energy distribution fitting with CIGALE. We identify 20,180 LSBGs and 434 ultra-diffuse galaxies (UDGs) in KiDS DR5. Their structural parameters are similar to known LSBGs from DES and the Hyper Suprime-Cam SSP Survey (HSC-SSP). The KiDS-LSBGs follow a continuous size-luminosity relation connecting classical dwarf galaxies and UDGs, and their colours are bimodal ($\sim73\%$ blue, $\sim27\%$ red). Cross-matching with spectroscopic and cluster catalogues provides redshifts for 4,913 systems, enabling a systematic characterisation of the star-forming main sequence of LSBGs. Strong environmental trends are evident, with cluster LSBGs and UDGs exhibiting redder colours and reduced star formation compared to non-cluster systems. We demonstrate that domain adaptation enables robust cross-survey LSBG identification with deep learning models, providing a scalable pathway for constructing homogeneous LSBG catalogues for the LSST and Euclid era.

Inpainting over the cracks: challenges of applying pre-merger searches for massive black hole binaries to realistic LISA datasets

2026-05-13T16:15:06Z

A key science target of the Large Interferometer Space Antenna (LISA) is to carry out multi-messenger observations of massive black hole binaries, observing the merger simultaneously in gravitational waves and with electromagnetic observatories. Identifying that a merger is happening and providing an updating estimate of the sky location in the hours, days and weeks before the merger is critical to enable electromagnetic observations of the merger event. In this work we demonstrate and compare two methods for premerger identification of massive black hole binaries; a zero-latency filter approach and, for the first time, an approach using an ``inpainting'' technique. We apply these methods to the LISA Data Challenge dataset 2a--Sangria-HM--and demonstrate the successful recovery of the 14 signals in the dataset that we expected to be identifiable at least half a day before merger. We show that the inpainting method can identify premerger signals even when gaps are present in the data, demonstrating the recovery of a signal even when 3 day-long data gaps are added to the 14 days preceding merger. Finally, we explore the challenge of overlapping signals, using a region of overlapping signals in the Sangria-HM dataset, all of which merge within a 10-day window, and show how removing signals that have been confidently identified from the data allows us to identify quieter signals in the same period.

DEFROST: Detecting Excess in Faraday Rotation thrOugh Sophisticated analysis Techniques

2026-05-13T14:40:05Z

Understanding origin and evolution of cosmological magnetic fields requires knowledge of magnetic fields in different extragalactic environments. In this context, a powerful tool is the statistical analysis of the Faraday effect on the linear polarization of a sample of radio sources. This effect carries information about the magnetic fields in our Galaxy, extragalactic environments between the sources and the observer, and within the emitting radio source itself. An accurate disentangling of all these components is crucial to characterize magnetic fields in the LSS of the Universe. The significant amount of data delivered by new radio instruments enables the investigation of increasingly weak magnetic fields. However, a trustworthy characterization is only possible with advanced analysis techniques. In this work, we present a new algorithm capable of simultaneously disentangling the Faraday effect due to our Galaxy from extragalactic contributions, by properly taking into account the observing noise. The algorithm takes as an input a catalog of RM complemented by auxiliary information as, e.g., the redshift. We tested the algorithm with synthetic data to assess its performance and identify the range of Galactic magnetic field power spectrum slopes that allows us to properly disentangle Galactic and extragalactic terms. Furthermore, we tested the algorithm with synthetic catalogs, based on m- and cm-data currently available, corresponding to different observing setups, noise, and cuts in the absolute value of the Galactic latitude of the radio sources. Considering noise values and density of polarized sources consistent with existing catalogs, we demonstrated that the most robust results are obtained with sources with absolute Galactic latitude > 45deg, with inference of the extragalactic parameters at most within 5sigma, both for dispersion in Faraday rotation of ~1 and 10rad/m2.

Smoothed Particle Hydrodynamics in pkdgrav3 for Shock Physics Simulations. I. Hydrodynamics

2026-05-13T12:45:01Z

We present pkdgrav3, a high-performance, fully parallel tree-SPH code designed for large-scale hydrodynamic simulations including self-gravity. Building upon the long development history of pkdgrav, the code combines an efficient hierarchical tree algorithm for gravity and neighbor finding with a modern implementation of Smoothed Particle Hydrodynamics (SPH) optimized for massively parallel hybrid CPU/GPU architectures. Its hybrid shared/distributed memory model, combined with an asynchronous communication scheme, allows pkdgrav3 to scale efficiently to thousands of CPU cores and GPUs. We validate the numerical accuracy of pkdgrav3 using a suite of standard tests, demonstrating excellent agreement with analytic or reference solutions. The code was already used in several peer-reviewed publications to model planetary-scale impacts, where SPH's Lagrangian nature allows accurate tracking of material origin and thermodynamic evolution. These examples highlight pkdgrav3's robustness and efficiency in simulating highly dynamical, self-gravitating systems. pkdgrav3 thus provides a powerful, flexible, and scalable platform for astrophysical and planetary applications, capable of exploiting the full potential of modern heterogeneous high-performance computing systems.

Artificial precession and instability in solar system and planetary simulations: analytic and numerical results

2026-05-13T12:28:31Z

Wisdom--Holman (WH) methods are algorithms used as a basis for a wide range of codes used to solve problems in solar system and planetary dynamics. The problems range from the growth and migration of planets to the stability of the solar system. In many cases, these codes work with Democratic Heliocentric Coordinates (DHC) which offer some advantages. However, it has been noted these coordinates affect the dynamics of solar system bodies in simulations, in particular Mercury's, and introduce artificial precession which affects solar system stability. In this work, we analytically derive the two-body artificial precession induced by DHC. We show the effect is small for solar system bodies, but the artificial effect on Jupiter is $242$ times larger than on Mercury. In a two-body Mercury-Sun system with general relativity (GR), artificial precession is negligible compared to GR precession, even with extreme timesteps that amplify the numerical effects. A simple two-planet Mercury--Jupiter system without GR amplifies artificial precession significantly. However, large artificial precession or artificial instability is not a danger unless one uses large timesteps that break the surrogate Hamiltonian approximation.

astroCAMP: A Community Benchmark and Co-Design Framework for Sustainable SKA-Scale Radio Imaging

2026-05-13T09:26:55Z

The Square Kilometre Array (SKA) will operate one of the world's largest continuous scientific data systems, sustaining petascale imaging under strict power envelopes. Current radio-interferometric pipelines typically achieve only 4-14% of hardware peak utilization due to memory and I/O bottlenecks, incurring high energy, operational, and carbon costs, further compounded by the absence of standardised cross-layer metrics and fidelity tolerances for principled hardware--software co-design. We present astroCAMP, a reproducible benchmarking and co-design framework for SKA-scale imaging, contributing: (1) a unified metric suite spanning performance, utilisation, memory/data-movement, sustainability, economics, and scientific fidelity; (2) standardised SKA-representative datasets and benchmark configurations for reproducible cross-platform evaluation; (3) a multi-objective co-design formulation linking quality constraints to time-, energy-, carbon-, and cost-to-solution; and (4) a design-space exploration workflow to derive Pareto-optimal operating regions. We evaluate WSClean+IDG on an AMD EPYC 9334 CPU and NVIDIA H100 GPU, revealing orchestration and synchronization bottlenecks despite efficient kernels, limited CPU strong scaling, and location-dependent carbon/cost efficiency. We illustrate astroCAMP for heterogeneous CPU--FPGA exploration and call on the SKA community to define quantifiable fidelity thresholds to accelerate principled optimisation for SKA-scale imaging.

Design of low-energy transfers in cislunar space using sequences of lobe dynamics

2026-05-13T07:03:31Z

Dynamical structures in the circular restricted three-body problem (CR3BP) are fundamental for designing low-energy transfers, as they aid in analyzing phase space transport and designing desirable trajectories. One of these dynamical structures, lobe dynamics, can be exploited to achieve local chaotic transport around celestial bodies. This study proposes and fully validates a systematic method for designing low-energy transfers by combining multiple sequences of lobe dynamics, building upon the authors' prior preliminary framework. A graph-based framework is developed to explore possible transfer paths between departure and arrival orbits, reducing the complexity of the combinatorial optimization problem for fuel-efficient transfer design. Using this graph, low-energy transfer trajectories are constructed by connecting chaotic orbits within lobes. The resulting optimal trajectory in the Earth--Moon CR3BP is then converted into an optimal transfer in the bicircular restricted four-body problem via multiple shooting. This transfer is compared with existing optimal solutions to demonstrate the effectiveness of the proposed method.

On the Reparameterization Between Cartesian Position-Velocity Vectors and Orbital Elements in the Kepler Problem

2026-05-13T04:25:12Z

Reparameterization from the standard set of orbital elements to Cartesian position-velocity vectors can be computationally advantageous for orbit inference problems, particularly when orbital elements are weakly constrained. Here we present compact analytic expressions for the Jacobian determinants of this transformation and its variants, which enable consistent transformation of prior probability densities under reparameterization and are therefore useful for a Bayesian treatment of such problems. We then use these results to clarify the application of this reparameterization in microlensing and astrometric contexts. We first revisit the widely used formulation of lens orbital motion during binary microlensing events presented by Skowron et al (2011). We show that their parameterization inadvertently adopts an incorrect definition of the longitude of the ascending node with respect to the sky-projected binary axis at a reference epoch, which renders the intermediate Jacobian formally singular. Using our closed-form expression, we provide a corrected analytic derivation of the Jacobian for this transformation and show that the resulting formula remains effectively unchanged when the longitude of the ascending node is properly defined with respect to an axis independent of the binary orbit. We also perform an explicit quantitative comparison of astrometric orbit fitting using a gradient-based Markov Chain Monte Carlo algorithm under the two parameterizations, and find that reparameterizing to Cartesian state vectors improves sampling efficiency and robustness relative to orbital-element sampling.

Forward Modeling of Dust-Induced Stray Light in Ground-Based Coronagraphs: A Dual-Path Monitoring Approach for High-Precision Inner Corona Observations

2026-05-13T04:16:51Z

High-precision ground-based observations of the inner corona (1.05-2.0 R_sun) are fundamentally constrained by instrumental stray light, particularly the additive background from dynamic dust accumulation on the objective lens. To address this issue, we propose a correction method for the Spectral Imaging Coronagraph (SICG) based on dual-path real-time monitoring and forward physical modeling. By simultaneously imaging the objective lens surface, we obtain deterministic prior information on dust distribution. We construct a physical point-spread function using optical defocus parameters and reconstruct the nonuniform scattering background via convolution. Model parameters are retrieved through data-driven inversion constrained by polar coronal holes. The method demonstrates excellent robustness under varying contamination conditions. After correction, the rms noise in the polar background is reduced by approximately 67% on average, and the signal-to-background ratio improves by a factor of up to 3.7 under heavy contamination conditions. Comparisons with space-based Solar Dynamics Observatory/Atmospheric Imaging Assembly observations indicate that the corrected images recover the morphological structures of streamers with high fidelity. Further radial intensity analysis reveals that the correction process successfully restores the hydrostatic exponential decay characteristic of inner coronal radiation. The fitted decay coefficient corresponds to a plasma temperature of approximately 2.0 MK, consistent with the characteristic formation temperature of the Fe XIV 530.3 nm line. These results demonstrate that the method effectively eliminates the dominant systematic bias in ground-based observations, providing a reliable data foundation for high-precision coronal thermodynamic and dynamic research with the SICG.

Machine-learning applications for weak-lensing cosmology

2026-05-13T01:45:54Z

This article reviews recent advances in the application of machine learning to weak-lensing cosmology. Weak gravitational lensing provides a unique and powerful probe of the total matter distribution in the Universe, independent of its physical state. By directly tracing the spatial distribution of otherwise invisible dark matter within the cosmic web, weak lensing has become a cornerstone for studying both the nature of dark matter and the physics governing large-scale structure formation. We begin by introducing the conventional estimators used to extract weak-lensing signals from modern galaxy-imaging surveys and by summarizing established methods for deriving cosmological information from these observables. We then discuss the limitations inherent in traditional analyses and outline how machine-learning techniques can mitigate these challenges. Finally, we explore future prospects for machine-learning-based approaches, highlighting their potential to further enhance the scientific return of current and upcoming weak-lensing datasets.

Connecting the Dots: A Machine Learning Ready Dataset for Ionospheric Forecasting Models

2026-05-12T23:26:49Z

Operational forecasting of the ionosphere remains a critical space weather challenge due to sparse observations, complex coupling across geospatial layers, and a growing need for timely, accurate predictions that support Global Navigation Satellite System (GNSS), communications, aviation safety, as well as satellite operations. As part of the 2025 NASA Heliolab, we present a curated, open-access dataset that integrates diverse ionospheric and heliospheric measurements into a coherent, machine learning-ready structure, designed specifically to support next-generation forecasting models and address gaps in current operational frameworks. Our workflow integrates a large selection of data sources comprising Solar Dynamic Observatory data, solar irradiance indices (F10.7), solar wind parameters (velocity and interplanetary magnetic field), geomagnetic activity indices (Kp, AE, SYM-H), and NASA JPL's Global Ionospheric Maps of Total Electron Content (GIM-TEC). We also implement geospatially sparse data such as the TEC derived from the World-Wide GNSS Receiver Network and crowdsourced Android smartphone measurements. This novel heterogeneous dataset is temporally and spatially aligned into a single, modular data structure that supports both physical and data-driven modeling. Leveraging this dataset, we train and benchmark several spatiotemporal machine learning architectures for forecasting vertical TEC under both quiet and geomagnetically active conditions. This work presents an extensive dataset and modeling pipeline that enables exploration of not only ionospheric dynamics but also broader Sun-Earth interactions, supporting both scientific inquiry and operational forecasting efforts.