https://arxiv.org/api/hHN1kn7Cw+kwJBkSU55TqGJ5bjg2026-06-10T22:47:34Z3590336015http://arxiv.org/abs/2603.10758v2A Python-Based Peeling Framework for Radio Interferometry: Application to uGMRT 650MHz Imaging2026-05-15T08:09:44ZModern radio interferometric arrays offer high sensitivity, wide fields of view, and broad frequency coverage, but also pose significant data calibration challenges. Standard direction-independent calibration is insufficient to correct direction-dependent effects, such as ionospheric phase distortions and primary beam variations, which produce strong artifacts around bright sources and limit achievable image dynamic range. Built on standard CASA tasks, we present a Python-based direction-dependent calibration and peeling framework, demonstrated using radio continuum imaging data from the upgraded Giant Metrewave Radio Telescope (uGMRT). The framework efficiently subtracts bright-source models and suppresses their associated direction-dependent artifacts, producing significantly flattened backgrounds and improving image fidelity and faint-source detectability. We further introduce an optimized ``model-restoration'' strategy that mitigates direction-dependent artifacts while preserving the flux densities and morphologies of bright sources that are themselves of scientific interest. For fields containing multiple bright sources, sequential application of the framework systematically reduces background noise, thereby increasing sensitivity and faint-source detectability. The framework is Python-based, CASA-compatible, and can be readily applied to other mid- and low-frequency interferometric arrays. The code is publicly released with this paper.2026-03-11T13:34:21Z14 pages, 8 figures. Accepted for publication in ATIHao PengPMOFangxia AnYNAOYuheng ZhangNanjing UniversitySrikrishna SekharNRAORuss TaylorIDIAXianzhong ZhengTsung-Dao Lee InstituteYongming LiangThe University of Tokyo10.3724/ati2026009http://arxiv.org/abs/2605.15696v1Measuring contributions from single and multiple atmospheric secondary cosmic rays in the {\it Princess Sirindhorn Neutron Monitor} using cross-counter neutron time delay distributions2026-05-15T07:40:21ZNeutron monitors (NMs) are ground-based devices designed to measure cosmic-ray count rates by monitoring atmospheric neutrons from cosmic-ray showers. We present results from new electronics that have recorded cross-counter time delay histograms for the {\it Princess Sirindhorn Neutron Monitor} (PSNM) at the summit of Doi Inthanon, Thailand. From these histograms, we have extracted the cross-counter leader fraction ($L$) and corrected it for atmospheric effects. For large counter separation, we measure nearly constant $L\approx0.997$, implying that 0.3\% of counts in one counter are temporally associated with later counts on a given distant counter. Monte Carlo simulations confirm that individual secondary particles cannot account for the associated counts at large counter separation, which instead requires a contribution from multiple secondary particles in the same cosmic ray shower that is apparently independent of distance over 3 to 7.5 m. We infer that $\approx$4.5\% of PSNM counts are associated with a later count in at least one of its 18 counters from a different secondary particle in the same shower. Monte Carlo simulations of atmospheric showers and NM yield functions can be validated using our measurements of neutron multiplicity across counters and the contributions of single and multiple secondary particles. These measurements also improve understanding of the single-counter $L$, which has been used for precise tracking of cosmic-ray spectral variations and extending the range of NM observations to higher energies.2026-05-15T07:40:21Z19 pages, 8 figures. Accepted for publication in the Astrophysical JournalWarit MitthumsiriDepartment of Physics, Faculty of Science, Mahidol University, Bangkok, ThailandAlejandro SáizDepartment of Physics, Faculty of Science, Mahidol University, Bangkok, ThailandDavid RuffoloDepartment of Physics, Faculty of Science, Mahidol University, Bangkok, ThailandPaul EvensonBartol Research Institute, Department of Physics and Astronomy, University of Delaware, Newark, DE, USAPierre-Simon MangeardBartol Research Institute, Department of Physics and Astronomy, University of Delaware, Newark, DE, USAWaraporn NuntiyakulDepartment of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai, ThailandChanoknan BangliengDivision of Physics, Faculty of Science and Technology, Rajamangala University of Technology Thanyaburi, Pathum Thani, Thailand10.3847/1538-4357/ae6efahttp://arxiv.org/abs/2605.15693v1Performance of the 4-m International Liquid Mirror Telescope tested in two fields at high and low ecliptic and galactic latitudes2026-05-15T07:33:48ZThe 4-m International Liquid Mirror Telescope (ILMT) offers a unique opportunity to detect transients in a narrow strip of sky. We explore ILMT's potential to detect astrometric and photometric transients at various ecliptic and galactic latitudes. We inspected CCD frames observed at both low and high ecliptic and galactic latitudes during the commissioning phase and the November 2023 - May 2024 observation cycle, respectively. We analysed these images using both visual inspection and the ILMT's transient detection and candidate classification pipeline. In the low ecliptic and galactic latitude field, we detected more than 500 transient candidates. We cross-matched these with the Minor Planet Checker (MPC) database, identifying 504 catalogued asteroids, all with predicted V-magnitudes brighter than 24 mag, representing a total of 152 distinct asteroids. We performed the same steps on the high ecliptic and galactic latitude field, detecting 30 MPC-catalogued asteroids, and one newly discovered photometric transient, named AT 2024fxn. We present the positions, trajectories, and magnitudes of the detected asteroids observed in the SDSS g', r', and i' spectral bands and compare results from both fields. We explore the lightcurve of AT 2024fxn, which shows partial compatibility with a supernova (SN) hypothesis, while the data invites further insights.2026-05-15T07:33:48ZTo appear in the Journal of Astrophysics and Astronomy. 33 pages, 13 figuresSara FilaliKumar PranshuJean SurdejPaul HicksonKuntal MisraBhavya AilawadhiTalat AkhunovMonalisa DubeyNaveen DukiyaBrajesh KumarPriyanshi KumariVibhore NegiAnna Pospieszalska-Surdejhttp://arxiv.org/abs/2605.15432v1The Nova Synthetic Data Base: A Principal Component/AI Analysis of Novae Synoptic Spectra2026-05-14T21:25:52ZThe Nova Synthetic Data Base (NSDB) is presented as the first publicly available database of synthetic spectra for classical nova shells, spanning an unprecedented range of physical parameters (e.g., ejecta mass, chemical composition, temperature, and luminosity of the white dwarf) at several post-eruption ages. Generated using detailed 3D photoionization models, this homogeneous database enables a systematic exploration of spectral features in novae. In this work, we introduce a principal component analysis/AI-based framework to derive time-dependent proxies for retrieving the physical properties of novae from limited spectral data. By analyzing the correlations between the eigenspectra and the grid's variables, a reduced set of diagnostic spectral lines is derived, paving the way for robust multiregressor machine-learning algorithms with a minimal effort observational set. The prediction capability of the method is high and robust to data noise. The results establish a proof of concept for the use of model grids combined with physically controlled AI as a tool to interpret novae observations in the context of the large number of events expected from future wide-area surveys.2026-05-14T21:25:52Z15 pages (ApJ style), 3 figures, 13 tables. Matches the published version in The Astrophysical Journal Supplement Series. Nova Synthetic Data Base (NSDB) available at http://specmodels.iag.usp.br. Includes an extensive Appendix with 7 tables of spectral-space selectionAstrophys. J. Suppl. Ser. 284, 24 (2026)Bruno C. SantosMarcos P. DiazLarissa Takeda10.3847/1538-4365/ae5641http://arxiv.org/abs/2605.15378v1Using the Open Science Data Federation for data distribution: Big Bear Solar Observatory use case2026-05-14T20:08:05ZThe growing demand for extensive data processing is now a standard in many scientific fields. Efficiently distributing data to processing sites and enabling seamless sharing has become crucial. The Open Science Data Federation (OSDF) builds on the success of the StashCache project to establish a global data distribution network. By expanding StashCache, OSDF integrates additional data origins and caches, enhancing accessibility and performance (20 origins and 30 caches), new access methods, and monitoring and accounting mechanisms. Additionally, the OSDF has become essential to the US national cyber-infrastructure landscape due to the sharing requirements of recent NSF solicitations. One use case for the OSDF is the data access to the Big Bear Solar Observatory (BBSO). Integrating the BBSO data into the OSDF provided standard and reliable data access. Moreover, the OSDF caches provide local data worldwide. Using the OSDF and the BBSO data, creating a pipeline to apply image processing techniques to all images from BBSO anywhere on the planet was possible.2026-05-14T20:08:05ZSydney MontielAlexsandra GuadarramaFabio Andrijauskashttp://arxiv.org/abs/2605.26125v1Inflatable devices for planetary aerocapture and aerobraking manoeuvres2026-05-14T16:43:49ZFuture missions to Mars and Venus will make use of aerobraking and aerocapture in order to gain mass through the saving of fuel at planetary arrival. So far only aerobraking has been demonstrated, if the Mars Premier project has paved the way for aerocapture, no demonstration was performed due to the project interruption. The use of these techniques induces additional constraints for planetary probes, since additional heating and mechanical loads have to be carefully managed. Moreover, aerocapture requires a high level of accuracy for the Guidance Navigation and Control aspects, since a pass at an altitude of the atmosphere with a different density could lead to the vehicle destruction. This document surveys the existing state-of-the-art on inflatable devices (including ballutes, sails, or inflatable heat-shield capsule) for orbital manoeuvres at planetary arrival.2026-05-14T16:43:49Z23 pagesPhilippe Reynierhttp://arxiv.org/abs/2605.14971v1Denoising Interferometric Observations Using Visibilities-Informed Neural Networks2026-05-14T15:34:51ZThe upcoming observations from the Square Kilometer Array Observatory will provide the astronomical community with a wealth of observations of important objects at long wavelengths. Full analysis of these outputs will necessitate specialized methods and software. Using synthetic observations of protoplanetary discs as an example, we present a machine learning-based visibilities-informed reconstruction for enhanced observations (VIREO) method for denoising data. This method explicitly provides a denoising U-Net with the interferometric observation's point spread function as both an additional input and term in the model's loss function. VIREO outperforms traditional cleaning methods and PSF-ignorant denoising models by producing data that is quantitatively cleaner and more conducive to analysis of the planets within the disc. Applying VIREO to archival ALMA data creates images with significantly less background noise, while maintaining, and in some cases enhancing, the substructure. By demonstrating the general utility of visibility-informed models, our results suggest that VIREO is generally applicable across the interferometric observatories.2026-05-14T15:34:51ZUnder review at MNRASJason P. TerryCassandra HallSergei Gleyzerhttp://arxiv.org/abs/2605.16422v1Mosaic: Area-Closed Spherical Surface Mosaics Induced by Cartesian Grids2026-05-14T13:56:43ZWe describe Mosaic, a computational geometry method for constructing the surface mosaic induced when a Cartesian volume grid intersects a spherical shell. The motivating application is conservative coupling between data produced on rectangular grids and diagnostics or boundary conditions defined on spherical surfaces, as occurs in space-weather, magnetohydrodynamic, atmospheric, and geophysical models. The method identifies Cartesian cells that intersect the shell, constructs cell-sphere prepatches, splices those regions by the spherical colatitude grid, and then splices by azimuth to produce final patches indexed by the five-tuple (nx, ny, nz, ntheta, nphi). The implementation explicitly treats the polar singularity by separating polar-derived theta patches from ordinary phi splicing. A near-pole numerical failure mode, caused by linear interpolation in azimuth, is removed by computing exact intersections between great-circle boundary segments and meridian planes. The prepatch construction also handles several degeneracy cases that occur beyond the ordinary corner-straddling geometry, including doubly-crossing edges, lens-shaped prepatches, secondary closed loops, and re-entrant face arcs. For a representative nonuniform Cartesian test grid, the current implementation builds 3618 intersecting Cartesian cells, 3602 ordinary prepatches, 6476 theta patches, and 9714 final phi patches, with all 3602 ordinary cells built successfully and zero theta or phi splicing failures. The final phi-spliced patches close in normalized area to roundoff relative to their theta-spliced parents. The method is implemented in the Java/Maven application mdi-mosaic, which provides visualization, diagnostics, mouse-over patch inspection, and JSON export of final patch boundaries and normalized areas.2026-05-14T13:56:43Z19 pages, 4 figures, 4 tablesH. F. CountsMihaela DobrescuD. HeddleAubrie KooikerWalter Piercehttp://arxiv.org/abs/2512.09878v2GFH-v2 Pipeline for Searches of Long-Transient Gravitational Waves from Newborn Magnetars2026-05-14T11:52:19ZThis paper presents an enhanced methodology for searching long transient gravitational waves associated with a newborn magnetar, with particular focus on the regime in which the early spin-down is dominated by gravitational-wave emission. The analysis is performed using a strongly improved version of the generalized Frequency Hough Transform algorithm, called GFH-v2. We describe the main developments introduced relative to the original implementation and outline the optimized parameter-space selection used in the search. We then compute the theoretical sensitivity of the method and compare it with an empirical sensitivity estimate obtained by injecting simulated signals into LIGO-Virgo-KAGRA O4a data. The updated framework achieves improved sensitivity and computational performance. These results provide a robust basis for future directed searches for long-transient gravitational-wave signals from core-collapse supernovae and other transient events in current and upcoming observing runs.2025-12-10T18:03:52Z16 pages, 10 figures ( +2 figures in appendix)Sandhya Sajith MenonLorenzo PieriniPia AstoneCristiano PalombaLorenzo SilvestriSabrina D'AntonioSimone Dall'OssoFrancesco Safai TehraniStefano Dal PraGaetano DinataleSergio FrascaDafne GuettaPaola LeaciAlessio Orlandihttp://arxiv.org/abs/2605.04587v2Mitigating stellar radial velocity jitter using orthogonal activity indices and a time-aware neural network2026-05-14T11:15:20ZDespite recent advances in the precision of high-resolution spectrographs, the detection of Earth-like exoplanets is still limited by the effects of stellar activity, which introduce radial velocity variations at the metre-per-second level or larger. We present a framework to disentangle stellar effects from planetary signals by exploiting high-order distortions of the cross-correlation function (CCF; a measure of the average spectral line profile), thus moving beyond the commonly applied Gaussian fit approximation. We decomposed the CCF using a Gram-Schmidt orthogonal basis function, enabling the separation of pure line shifts from line-shape distortions. To model activity-induced contributions to the radial velocities, we have developed a time-aware convolutional attention network dubbed CANSTAR. This network was trained on synthetic line-shape distortion coefficients produced with the realistic stellar simulator StarSim to learn the temporal evolution of stellar activity features. We validated our framework using HARPS and CARMENES observations of two active stars, $ε$ Eridani and TZ Arietis. The network effectively mitigates stellar activity, reducing the radial velocity RMS to 52.5 % and 62.4 % of the uncorrected variability, respectively. This correction enables a more precise determination of the orbital parameters of TZ Arietis b compared to a Gaussian process regression. Our results demonstrate that neural networks that incorporate the temporal context can outperform state-of-the-art methods in complex activity regimes. Future improvements on StarSim that will allow us to train CANSTAR on 3D magnetohydrodynamic spectra and more complex instrumental modelling are expected to bridge the performance gap between synthetic and real data, offering a robust pathway towards detecting Earth-mass planets around Sun-like stars.2026-05-06T07:36:24Z25 pages, 21 figures, accepted to A&AJordi Blanco-PozoManuel PergerGuillem Anglada-EscudéIgnasi RibasDavid BarochMarina LafargaJuan Carlos MoralesÒscar Porqueras-LeónSophie StuckiDavid Vallmanya Pochhttp://arxiv.org/abs/2605.14602v1The simulation on neutron background reduction for InDEx at JUSL2026-05-14T09:17:57ZDark matter experiments are rare event search experiments that require zero background environment over very long exposures. To achieve this condition, a detailed simulation of detector geometry and experimental setup is required before the experiment is executed. Simulation plays a significant role in detector design and also provides a cost-effective and risk-free approach for predicting outcomes before real world experimentation. The present simulation work is focused on neutron background reduction for a dark matter direct detection experiment in India, the Indian Dark matter search Experiment (InDEx). The FLUKA and FLAIR simulation tools have been used throughout the simulation process. The experimental and simulation results available in the literature are being reproduced using FLUKA for validation purposes. The calibration and InDEx experiment are simulated, and the results are compared against the experimental results. For neutron background reduction in future experiments, the use of high density polyethylene (HDPE) is suggested and a shielding design using HDPE is presented. The results show that shielding reduces detector event rates by two orders of magnitude compared to the prior InDEx experiment without shielding.2026-05-14T09:17:57Z13 pages, 8 figuresSusmita DasMaitreyee NandyMala Dashttp://arxiv.org/abs/2605.13735v2A New PSF Deconvolution Algorithm: Simultaneous Spatial Resolution Enhancement and Point Source Removal for Morphological Analysis of AGN Host Galaxies2026-05-14T05:37:17ZWe propose a new point-spread function (PSF) deconvolution algorithm for images of galaxies hosting an active galactic nucleus (AGN), designed to simultaneously enhance the spatial resolution of the host galaxy and remove the bright central point source. In this algorithm, an intrinsic image is reconstructed by decomposing an observed image into two components: an image $I_{\rm sm}$ of an extended component (i.e., a host galaxy) and an image $I_{\rm sp}$ of a point-source component (i.e., an AGN). During image reconstruction, three constraints are imposed: (1) a smooth constraint on the image $I_{\rm sm}$ , which spatially smooths the host-galaxy structures; (2) a sparse constraint on the image $I_{\rm sp}$ , which localizes the point source to a small number of pixels; and (3) a new constraint, the point-source balance constraint, based on the pixel-wise product $I_{\rm sm} \times I_{\rm sp}$ , which removes the point source from the host galaxy without over- or under-subtraction. As a test, we apply this algorithm to images of artificial and $z \sim 0-1$ real AGNs observed with Hyper Suprime-Cam on the Subaru Telescope. We find that the spatial resolution of the host-galaxy images is improved to a level comparable to that of images from the Hubble Space Telescope and that the bright central point sources are removed. This algorithm is expected to enable statistical morphological studies of distant AGN host galaxies when applied to wide-field survey data from the Vera C. Rubin Observatory, the Euclid Space Telescope, and the Roman Space Telescope.2026-05-13T16:13:20Z15 pages, 10 figures, 2 tables. Submitted to PASJ. Minor formatting changes and typo fixesRen KawaseTakatoshi ShibuyaKazunori Matsudahttp://arxiv.org/abs/2605.14348v1A $Z_1^2$ framework for rotational-parameter estimation and uncertainty quantification in high-energy pulsars2026-05-14T04:16:28ZWe present a $Z_1^2$-based framework for estimating the spin frequency and frequency derivative of high-energy pulsars from Poisson-limited photon event lists. The key point is that the width of a coherent detection peak is not, by itself, the statistical uncertainty on the recovered rotational parameters. We develop and compare three computationally efficient estimators: segmented frequency regression, a coherent derivative scan, and a localized two-dimensional coherent fit. For sinusoidal signals, we derive the local form of the Z-squared response as a function of frequency and frequency derivative, and show that expressing the frequency at the midpoint of the observation removes the leading-order covariance between the two parameters. This gives simple uncertainty estimates in terms of the fitted peak amplitude and local widths, without requiring an exhaustive Monte Carlo simulation for each observation. We test these estimates with Monte Carlo simulations over a range of observing spans, signal strengths, grid resolutions, and good-time-interval structures, and show that the predicted uncertainties reproduce the run-to-run scatter of the recovered parameters in the tested regimes. We then apply the framework to AstroSat/LAXPC event lists for the Crab pulsar, Swift J0243.6+6124, and SAX J1808.4-3658. The results provide a practical and statistically motivated route to rotational-parameter estimation for targeted high-energy pulsar searches.2026-05-14T04:16:28ZSubmitted to Monthly Notices of the Royal Astronomical Society; 20 pages, 27 figuresAkshat SinghalRohit NairDevendra SahuGayathri RamanSuman Balahttp://arxiv.org/abs/2605.14279v1Opportunities for Gravitational Wave Physics at the South Pole2026-05-14T02:25:56ZAtom interferometers represent a promising approach for gravitational wave detection in the decihertz frequency band, complementary to existing light-based detectors. The South Pole offers unique advantages for such experiments: exceptionally low seismic noise, established infrastructure for large scientific projects, and a location that strengthens gravitational wave source localization through global triangulation. Here we discuss the scientific case and practical considerations for deploying a long-baseline atom interferometer at the South Pole, which has the potential to expand the global network of gravitational wave detectors while enabling precision tests of fundamental physics.2026-05-14T02:25:56Z12 pages, 3 figuresC. A. ArgüellesM. DuVernoisP. W. GrahamT. KovachyJ. Mitchellhttp://arxiv.org/abs/2605.14144v1CIAO: Chandra's Data Analysis System for X-Ray Astronomy and Beyond2026-05-13T21:50:50ZThe Chandra Interactive Analysis of Observations (CIAO) software, developed by the Chandra X-ray Center, has been the data analysis package for the Chandra X-ray Observatory since its launch in 1999. Over nearly three decades, CIAO has grown from a small software suite into a widely used system for X-ray data analysis and beyond.
CIAO provides tools for calibration, spectral, imaging, and timing analysis, together with high-level scripts and the \sherpa\ modeling and fitting application. Its modular design and unified data model allow users to build flexible analysis workflows while maintaining consistency with the Chandra data processing pipeline. Visualization capabilities are provided through integration with SAOImageDS9 and Python-based tools, and simulation components such as ChaRT and MARX extend the analysis environment to include detailed modeling of instrumental effects.
In this paper we describe CIAO's design, evolution, and capabilities after 25 years of Chandra operations. We also describe its core architecture, scripting environment, modeling, visualization tools, simulation components, and testing infrastructure, as well as the documentation and user support system that have contributed to its widespread use. CIAO's continued development and broad adoption highlight its important role in X-ray astronomy and its usefulness in multiwavelength astrophysical research.2026-05-13T21:50:50Z20 pages, 15 figures, 1 appendixAntonella FruscioneJonathan McDowellDouglas BurkeMark Cresitello DittmarIan N. EvansJanet D. EvansKenny GlotfeltyHans Moritz GuentherDavid HuenemoerderWilliam JoyeNicholas P. LeeWarren McLaughlinJoseph B. MillerMelania NynkaDavid A. PrincipeAneta Siemiginowska