Dynamic Range Beyond Bit Depth of a CMOS Image Sensor Using Interleaved Row Readout

2026-06-05T18:59:43Z

The dynamic range available from a sensor is vital to its utility. The limits on the dynamic range that can be obtained from an image sensor are set by the brightest and faintest objects that can be detected. In recent years, CMOS (complementary metal-oxide-semiconductor) image sensors (CIS) have gained high popularity due to their low cost and high availability. However, as with all detectors, the dynamic range is constrained by the sensor's bit depth. Here, we have modified the readout scheme of a commercial CIS120 sensor from Teledyne e2v, to enhance its dynamic range. We have advanced the interleaved row readout method proposed by Wocial et al. by using a more sophisticated approach, which enables us to readout chosen rows much more frequently to avoid saturation and then readout other rows on the sensor once to form the image. Our laboratory tests provide a dynamic range of 134 dB elevated from the sensor's native 12-bit of about 71 dB. We also built a camera housing that enabled first-time operation of interleaved row readout on-sky to observe the bright stars, Vega and Polaris. In complex mode we obtained unsaturated single exposure images of these bright stars, which have magnitudes near zero and detect background stars with Gaia G magnitudes around 15 in a single exposure, with a detection threshold of 5$σ$. The achievable dynamic range with this interleaved row readout is limited only by the readout noise and scattering in the camera optics.

Do Vision-Language Models See Dwarf Galaxies the Way We Do?

2026-06-05T18:45:25Z

With the advent of powerful, general-purpose vision-language models (VLMs), there has been growing interest in their potential to assist astronomical discovery, a field characterized by large volumes of image data. In this work, we evaluate VLMs on the challenging task of identifying ultra-faint dwarf galaxy candidates using multi-panel diagnostic images from survey data. We compare model predictions to human annotations from a large-scale citizen science campaign. We find that zero-shot VLMs closely reproduce aggregate human calibration and perform well on less ambiguous cases. However, there is significant variability at the level of individual examples, and attempts to obtain uncertainty estimates (via self-reported confidence or repeated inference) fail to yield reliable and practically useful measures. Our results highlight both the promise and the current limitations of deploying VLMs for large-scale scientific discovery in realistic settings.

Beyond Point Estimates: Benchmarking Uncertainty Quantification Methods on the AION-1 Astronomical Foundation Model

2026-06-05T18:29:19Z

Foundation models for astronomical surveys offer powerful learned representations that can be transferred to downstream regression tasks such as galaxy property estimation. However, point predictions alone are insufficient for scientific inference; reliable uncertainty quantification (UQ) is essential. We compare seven UQ methods on galaxy property regression using frozen AION-1 foundation-model embeddings, predicting redshift, stellar mass, stellar-population age, gas-phase metallicity, and specific star-formation rate, from Legacy Survey photometry/imaging and DESI spectra, with PROVABGS-derived labels. Distribution-free conformal methods achieve marginal coverage within $\sim$1\,pp of the nominal 90\% across all properties, while non-conformal baselines (Deep Ensembles, MC~Dropout) fail to calibrate reliably. Among conformal approaches, Conformalized Quantile Regression (CQR) delivers the best coverage in the bin with the poorest model predictions. More importantly, only the Locally Valid and Discriminative (LVD) framework -- particularly when operating on AION-1 embeddings -- also provides finite-sample \emph{local validity}, producing intervals that adapt to each galaxy's local prediction difficulty rather than relying on marginal guarantees alone. These results establish conformal prediction, and LVD in particular, as the preferred UQ framework for uncertainty-aware inference on foundation-model embeddings in astrophysics.

Towards Instrument-Agnostic Exoplanet Candidate Prioritization

2026-06-05T18:26:33Z

We have developed a novel machine learning (ML) approach for predicting the likelihood of exoplanet candidate confirmation equally capable of performance on both TESS and Kepler data. From the NASA exoplanet archival post-processed Kepler and TESS databases, we chose six parameters that we assessed to be predictive to the planet transit signature: planet orbital period (P), planet radius ($R_{\rm p}$), stellar temperature ($T_{\rm eff}$), stellar radius ($R_{\rm star}$), planet transit depth ($δ$), and planet transit duration ($t_{\rm d}$). We used these parameters to evaluate eleven different ML models on all possible train/test combinations of TESS and Kepler data, using the confirmed planet and false positive labels as our training targets. We found that, due to substantially different distributions of our chosen parameters in Kepler and TESS databases, models trained with data from one instrument have difficulty predicting the other. However, models trained jointly with both TESS and Kepler data can perform well on both. We combined our best models into a statistically robust ensemble to evaluate the planet candidates in both Kepler and TESS, and we provide a list of the top candidates predicted by our model for each. Confirmed planets and false positives that have been resolved since the completion of our analysis demonstrate the effectiveness of our model and suggest that our top candidates are likely to be confirmed if they are further analyzed by the community. With the upcoming launch of the Nancy Grace Roman Space Telescope (Roman) and the expected order-of-magnitude increase in planet candidates, we suggest that our method can be extended to Roman data for robust and effective prioritization for analysis.

SynIM: a high-performance GPU-accelerated Python library for synthetic interaction and tomographic reconstruction matrices in next-generation adaptive optics

2026-06-05T18:17:06Z

Next-generation Adaptive Optics (AO) systems for 8-40m class telescopes, such as MORFEO (ELT) and MAVIS (VLT), demand high calibration accuracy. Controlling thousands of actuators makes experimental calibration unfeasible due to daytime overheads, environmental disturbances, and opto-mechanical aberrations. Consequently, model-based (synthetic) calibration has become the mandatory standard. We present SynIM, an open-source Python library designed for computing high-fidelity synthetic Interaction, Projection, and Covariance Matrices. SynIM leverages GPU acceleration via CuPy to handle the massive dimensionality of high-order systems. A core innovation is its handling of spatial geometry via composite affine transformations and absolute sub-pixel grid alignment. By merging DM and WFS shifts, rotations, and magnifications into a single operation, SynIM minimizes interpolation artifacts. SynIM introduces an optimized numerical derivative engine for slope computation that mathematically aligns spatial grids at the sub-pixel level, closely mimicking the physical behavior of Shack-Hartmann sensors. It outperforms geometric estimators like the G-tilt telescoping sum at high spatial frequencies, while yielding a substantial computational speed-up. Crucially, end-to-end MCAO simulations demonstrate that reconstructors built with SynIM deliver closed-loop AO performance practically equivalent to full physical optics models. SynIM natively supports SCAO, GLAO, MCAO, and LTAO configurations. It features optimized multi-WFS batch processing, modules for MMSE tomographic reconstructors, and full compatibility with SPRINT for online tracking. Currently driving the design and operational strategies for MORFEO, MAVIS, AOF, KAPA, and WST, SynIM stands as an essential tool for next-generation AO calibration.

MORFEO wavefront error budget

2026-06-05T18:10:01Z

MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY) is the multi-conjugate adaptive optics module of the ESO Extremely Large Telescope (ELT), designed to deliver diffraction-limited performance in the near-infrared for its first-light camera MICADO. With its 12 wavefront sensors and three deformable mirrors, MORFEO stands as the largest and most complex adaptive optics system ever developed for astronomical observations. A key aspect of its design and verification is the construction of a comprehensive wavefront error (WFE) budget, which defines the system's expected performance under a range of operating conditions. In this work, we present the structure of the MORFEO WFE budget, detailing the main contributors to the residual error and the methodology adopted to evaluate each term. The analysis includes contributions from atmospheric turbulence, optical surfaces, alignment tolerances, control residuals, and calibration uncertainties. We also discuss the external conditions, system configurations, and key assumptions used in the derivation of the budget, highlighting the interplay between requirements and instrument design choices. Importantly, the resulting error budget is being used to support end-to-end simulations of MORFEO-assisted observations, providing essential input for assessing the scientific capabilities of the system and guiding the definition of future observing strategies.

CMBolic: Symbolic emulators for the Cosmic Microwave Background. I. Lensing

2026-06-05T18:00:12Z

We present the first installment of CMBolic: a suite of symbolic cosmic microwave background (CMB) emulators. In this instance, we emulate the CMB lensing potential power spectrum $C_\ell^{φφ}$ for the widely used extended $Λ$CDM model which simultaneously includes massive neutrinos and evolving dark energy modelled using the Chevallier-Polarski-Linder (CPL) parameterization. We achieve comparable precision to existing neural network emulators, with the added benefit of simpler handling as our emulators are analytic functions of the model parameters and multipole $\ell$. On independent validation spectra evaluated in the range $2\leq \ell \leq 5500$, CMBolic achieves mean absolute fractional errors of $0.27\%$ in the $Λ$CDM subspace and $0.32\%$ across the full extended parameter space. This emulation error is well below even the most optimistic noise forecasts from CMB Stage 4 experiments. We apply CMBolic to cosmological parameter estimation with Bayesian inference using the lensing-only likelihoods from ACT DR6 and Planck. We show excellent agreement between the posteriors obtained by CMBolic and the Boltzmann code CLASS. This demonstrates the practical use of CMBolic on cosmological parameter estimation, reducing the runtime from 2 weeks to under 3 minutes.

A preliminary exploration of the effects of baseline length for the LIFE space mission

2026-06-05T14:52:05Z

By aiming to find and characterise dozens of habitable exoplanets through the technique of nulling interferometry, the LIFE space mission will produce transformational science. One of the key parameters for such an interferometric mission is the nulling baseline length - the distance between nulled apertures, which past studies have assumed to be 10-100m. Advances in planet occurrence statistics and simulation tools allow us now to revisit this key assumption with significantly more detail, particularly with the intention to reduce the range of baselines considered due to mission implementation concerns. We utilise the LIFEsim mission simulator along with revised mathematical tools to identify whether the range of baselines could be reduced without significantly affecting planet yield and fringe tracking performance. Along the way, we also determine a new astrophysically motivated technique for choosing which baselines are optimal for a given science target. We find that indeed, LIFE could utilise a considerably shorter range of baselines, such as 25-80m, or even discrete baselines without much (<10%) loss of performance. Nevertheless, careful trade-offs between performance and implementation simplification must be made, especially considering any spectral weighting that may be required by the scientific goals, and the potential loss of target-specific baseline optimisation.

Red noise and evolving signals: a complete frequentist approach to supermassive black hole binary searches with pulsar timing array

2026-06-05T14:46:09Z

Searches for gravitational waves (GWs) from isolated supermassive black hole binaries (SMBHBs) in pulsar timing array (PTA) data require simultaneous estimation of signal and noise parameters, so the dimensionality of the fit scales with the number of observed pulsars. This computational difficulty is exacerbated when source evolution from GW emission is included, since retaining both Earth and pulsar terms introduces the unknown pulsar distances. Existing frequentist methods such as the $\mathcal{F}$-statistic, restricted so far to non-evolving sources, effectively, imply a circular analysis, which may lead to biased estimators. We present a Generalized Likelihood Ratio Test (GLRT) and the associated $\mathcal{T}$-statistic that overcomes the aforementioned limitations. The formulation of the GLRT extends earlier work in which the dimensionality of the fitting problem was drastically reduced by semi-analytical maximization of the likelihood over the pulsar phase parameters, followed by efficient global optimization over the remaining parameters using Particle Swarm Optimization. Our simulations demonstrate that for an evolving SMBHB signal with chirp mass $\mathcal{M}=10^{9.2}\,M_\odot$ and signal-to-noise ratio $20$, this detection statistic achieves a $100\%$ detection probability at a false-alarm probability of $0.06$ in a 30-pulsar timing array, which is characterized by a $100~\mathrm{ns}$ root-mean-square white noise residual and pulsar-specific red noise.

A Simulation Platform for Small Solar System Bodies' Gravity Using the Einstein-Elevator

2026-06-05T12:54:46Z

Small solar system bodies (SSSB), which in this study are defined primarily as asteroids and comets, are becoming increasingly important as more data have become available for their study. Their significance is also highlighted by missions like NASA's OSIRIS-REx or ESA's Rosetta. However, the study of the characteristics and behavior of these objects on Earth is a challenge as the simulation of their environmental conditions are difficult. We present in this paper an approach to enable the gravity simulation of SSSBs such as comets or asteroids in a drop tower facility on Earth, which is being addressed as part of the AKUS ("Activity of Comets under Partial Gravity") project. This especially concerns gravity levels between 10$^{-2}$~\textit{g} and 10$^{-4}$~\textit{g}, where the duration of the adjusted acceleration ranges from 2.5 to 3.2 seconds. In order to simulate the conditions of SSSB as accurately as possible, an acceleration system based on servo motors and spindle axes has been developed. The accelerations are transferred from the motors to the spindle axes containing a comet-like sample. The current dimensions of the total load (including sample, sample holder, data- and communication box) are 315~mm x 160~mm x 331~mm (w x d x h), with a total weight of approximately 15~kg. These are together placed inside a vacuum chamber providing a vacuum quality of 10$^{-6}$~mbar. The whole setup is installed inside the Einstein-Elevator. Our results show that, with the current setup, we are able to generate conditions from 10$^{-2}$~\textit{g} down to 10$^{-3}$~\textit{g}. The maximum deviations under these conditions are $\pm5$$\cdot 10^{-4}$~\textit{g}.

Chhavi: A Python Tool for Converting RAMSES Outputs to VTKHDF for High-Fidelity AMR Visualization

2026-06-05T12:49:16Z

RAMSES is an adaptive mesh refinement (AMR) astrophysical simulation code that generates high-resolution multiscale data. However, its native binary output format is not directly compatible with standard visualization tools, making efficient analysis challenging. We present Chhavi, an open-source Python tool that converts RAMSES outputs into the VTKHDF format for direct use in visualization platforms such as ParaView. The tool reconstructs the AMR hierarchy, preserves key physical fields including density, pressure and velocity, and organizes them into a structured representation suitable for multi-resolution visualization. The conversion is validated using the three-dimensional Sedov blast wave test case. Quantitative evaluation through radial profile comparison and Lin's concordance correlation coefficient demonstrates strong agreement between the original and converted datasets, confirming both physical and structural fidelity. Chhavi provides a scalable bridge between RAMSES simulation outputs and modern visualization workflows, supporting efficient and reproducible analysis in computational astrophysics.

High-Speed Observations of Lunar Impact Flashes

2026-06-05T11:43:13Z

Lunar impact flashes provide a direct means of estimating the flux of centimetre-sized meteoroids impacting the lunar surface. However, 25-60 frames per second imaging typical of most monitoring programs limit the ability to resolve the rapid temporal evolution of the impact process, while the integration of Earthshine background restricts the detection of faint flashes. In this work, we present high-speed observations of lunar impact flashes captured at 200 and 250 FPS using the Zadko Telescope in Western Australia. We resolve the light curves of four confirmed events, revealing complex morphologies, some of which are not well modelled by simple exponential decays. One event was simultaneously detected by a second observer using a 50 FPS system, revealing a significantly faster brightness drop in the high-speed data that cannot be explained by spectral differences alone, indicating temporal integration of the vapour plume and subsequent ejecta. Our data also indicates that the initial flash intensity (representing the vapour plume) exhibits significantly less variance across events than the total luminous energy. Furthermore, we found no statistical correlation between the initial luminous energy and the total integrated energy of the flashes in this data, suggesting that the physical mechanism driving the initial vapour expansion may be physically decoupled from the longer-duration glow driven by the cooling ejecta. High temporal resolution combined with high sensitivity are therefore essential for accurately characterising the physical properties of the impactor and distinguishing the initial vapour plume from the subsequent incandescent cooling phase, although a significantly larger dataset is required to definitively constrain these mechanisms.

Second-Generation Fabry-Pérot Unit for CARMENES

2026-06-05T11:12:44Z

CARMENES consists of two high-resolution spectrographs located at the Calar Alto 3.5m telescope, covering the wavelength range from 520nm to 1710 nm. The original Fabry-Perot (FP) units have been essential to track and remove instrumental drift while also improving the wavelength solution provided by the hollow cathode lamps. In this paper we present the second-generation FP unit that has begun operation at Calar Alto in April 2024. It features drastically improved temperature stabilization, additional temperature monitoring, and enhanced optomechanics. Temperature stabilization is improved through better vacuum vessel design, thermal shielding and improved thermal control. The temperature is now monitored with Pt-100 sensors inside the vacuum vessel, one of which is used to drive the temperature control. The new purpose-built optomechanics allow for an improved alignment procedure leading to higher line contrast. The etalon coatings now cover a broader wavelength range, the optics have been upgraded, and the fibers have been updated to an octagonal shape. In laboratory measurements with a Fourier transform spectrometer we compare the FP radial velocity (RV) drift to that of an iodine cell. In a two hour binning we achieve an RMS of the differential RVs of 6cm/s. The new FP unit has already been successfully integrated at CARMENES, with first calibration data indicating improved RV precision.

Collisional excitation of H$_2$CO by He: Experimental validation of state-of-the-art scattering calculations

2026-06-05T08:33:09Z

Context. Non-local thermodynamic equilibrium conditions in the interstellar medium require collisional rate coefficients to model astronomical observations; these are usually determined from theoretical scattering calculations. Aims. The aim of this study is to measure experimentally low-temperature pressure-broadening cross-sections for the H2CO-He system in order to validate the theoretical methodology involved in determining new collisional rate coefficients. Methods. The experiments employed the chirped-pulse in uniform supersonic flow method, and H2CO is generated in situ by 193 nm excimer laser photolysis of tetrahydrofuran in cold He flows. State-of-the-art calculations are performed by computing a new potential energy surface for the H2CO-He system which is subsequently implemented in scattering calculations using the close-coupling method to derive collisional rate coefficients and pressure-broadening cross-sections. Results. Excellent agreement between theory and experiment is obtained, with the calculated values falling within the 95% confidence intervals of the experimental measurements. Such agreement validates the high accuracy of the theoretical data. Conclusions. Helium constitutes about 20% relative to H2 in the interstellar medium. The inclusion of collisional rate coefficients for H2CO with He in radiative transfer modelling leads to variations in the excitation temperature of frequently detected rotational lines of up to 12% in warm regions such as protostars.

Correlation and Data-Analysis Distinctiveness of Time-Delay Interferometry Configurations

2026-06-05T05:49:36Z

Time-Delay Interferometry (TDI) is essential for space-based gravitational wave (GW) missions, as it suppresses laser frequency noise and achieve the required sensitivity. Beyond the standard Michelson configuration, a variety of second-generation TDI schemes have been proposed, each utilizing different combinations of inter-spacecraft laser links. In this work, we conduct a comparative study of several representative TDI configurations with different time spans, and show that while their (quasi-)orthogonal channels are highly correlated, their performance in data analysis can differ among these schemes. In the low-frequency regime, the performance of different TDI configurations are nearly identical. Their distinctions emerge primarily at high frequencies, where the GW wavelength becomes comparable to the arm length. In this regime, shorter TDI time spans with minimal null frequencies facilitate more accurate waveform modeling and parameter recovery in frequency domain. In contrast, configurations with longer time spans and more null frequencies, such as the Michelson, are more susceptible to frequency aliasing and waveform modulation effects, which degrade inference accuracy. However, if signal modeling and analysis are performed in the time domain, the optimal science channels of these TDI configurations exhibit consistent performance in parameter inference. Considering the usability in both frequency and time domain, the short-span PD4L scheme, which exhibits minimal nulls and superior performance in high frequencies, emerges as a promising candidate for future space-based GW mission designs.