The Venus Benchmark: Resolving Degeneracies in Terrestrial Exoplanet Spectra with DAVINCI

2026-09-10T17:31:35Z

The characterization of terrestrial exoplanets with thick, CO$_2$-dominated atmospheres via transmission and emission spectroscopy is limited by degeneracies between atmospheric composition, cloud structure, and surface conditions. These degeneracies are particularly acute for planets in or near the Venus Zone, where sulfuric acid aerosol layers and deep-atmosphere opacity render the lower atmosphere and surface spectroscopically inaccessible via many optical/IR wavelengths. Venus provides the only accessible analog to such worlds, yet current knowledge of its full atmospheric profile relies on decades-old in situ data with known limitations. Here we demonstrate that the forthcoming DAVINCI (Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging) mission will provide the comprehensive, high-fidelity atmospheric profile data necessary to resolve many of these degeneracies. We quantify how atmospheric profile uncertainties translate into uncertainties in modeled transmission and thermal emission spectra of CO$_2$-dominated terrestrial worlds, and show that the spread in the modeled Venus benchmark spectrum arising from current atmospheric profile uncertainties will decrease by factors of $\sim$4--5 for transmission and $\sim$5--15$\times$ for thermal emission after DAVINCI, providing a correspondingly improved benchmark and prior for the modeling of exoplanets with Venus-like atmospheres. We further demonstrate that these improvement factors are larger for the cloud-free atmospheric case, where the opacity floor is set by gas-phase processes rather than aerosols, because the pre-DAVINCI data are most discrepant in the sub-cloud region. Our results highlight the importance of Venus for the atmospheric characterization of rocky exoplanets in the JWST and HWO era, and demonstrate how DAVINCI measurements will directly improve exoplanet atmospheric modeling.

The Dyn-Atmo Survey: JWST/NIRSpec spectroscopy of dynamical benchmark GJ 758 B

2026-09-10T17:22:45Z

We present new JWST/NIRSpec IFU high contrast spectroscopic observations of the brown dwarf companion GJ 758 B. Extensive radial velocity monitoring of the primary has enabled high-precision measurements of the companion mass through characterization of their joint orbital dynamics. The combination of prior space- and ground-based photometry and spectroscopic observations in concert with a spectral model-independent mass makes this target an ideal benchmark for calibrating evolutionary models with known mass-age-luminosity degeneracies. A template-matching analysis on the NIRSpec/IFU data (F290LP,G395H; $λ\in$ [2.87-5.27] $μ$m) detects the companion at the expected orbital position with incredible significance (265.2$σ$). Comprehensive spectral analysis including published datasets over a variety of different spectral model families reveal that an inference using a uniform radius prior is plagued by inaccurate posteriors. The atmospheric model degeneracy between metallicity, gravity, and clouds pull the inferred mass/gravity/radius to an unphysical portion of parameter space for all model families tested. A constrained inference with a gaussian prior on the mass can mitigate this issue but models without clouds still struggle to accurately reproduce the K-band photometry and result in mass inferences which are inconsistent with the dynamics. We explore modifying the spectral models with custom post-processed clouds and molecular abundance perturbations of ammonia and hydrogen sulfide. We find the best-fitting model includes clouds with no patchiness (hole fraction f$_\mathrm{hole}$ = 0), a small fractional depletion in ammonia and moderate enhancement in hydrogen sulfide.

The Dyn-Atmo Survey: High-contrast Imaging Spectroscopy of the Substellar Companion HD 13724 B with the JWST NIRSpec IFU

2026-09-10T17:22:45Z

We present the first spectral analysis from the JWST Cycle 3 GO Program #6362, the Dyn-Atmo Survey of dynamical-atmospheric benchmarks, characterizing the atmospheres of directly-imaged companions with dynamical masses and measured orbits. This program has obtained moderate-resolution spectra (R$\sim$2700, 3-5$μ$m) using the NIRSpec/G395H IFU. We observe the T4-dwarf companion, HD 13724 B, companion to a G-type star at a projected angular separation of 0''2. Updated orbital monitoring constrains the mass to $38.3\pm0.6~M_{\rm{Jup}}$, which we use as a Gaussian prior when inferring the atmospheric state. We fit the continuum-subtracted spectrum using the BT-SETTL, Sonora Diamondback, Sonora Flame Skimmer, and NEWERA-PHOENIX self-consistent model grids, together with petitRADTRANS atmospheric retrievals. We adopt bulk parameter values of $T_\mathrm{eff}$=$1150\pm$195 K, $\log g$=5.1$\pm0.3$ dex, [M/H]=0.4$\pm$0.4, $\log_{10}(K_{zz})$=6.33$_{-2.22}^{+2.59}$, and C/O=$0.50\pm0.13$ using a bayesian average across model grids. We find degeneracies in the models between surface gravity, metallicity, and $K_{zz}$ for Sonora Diamondback and Flame Skimmer. The Flame Skimmer and NEWERA-PHOENIX vertical mixing strengths are incompatible, with Flame Skimmer finding a systematically lower value. The retrievals favor an atmosphere in chemical equilibrium, with enhanced metallicity and a solar C/O ratio, but with no detection of disequilibrium chemistry, and no detection of trace gases other than CH$_4$, CO$_{2}$, $^{12}$CO and H$_{2}$O. Ultimately, we identify critical challenges in forward modeling continuum-subtracted G395H spectra in the low signal-to-noise regime. We find that including independent dynamical mass measurements better constrains atmospheric parameters, but degeneracies between self-consistent model parameters limit accurate atmospheric parameter inferences.

Robust Joint Estimation of Galaxy Redshift and Spectral Templates using Online Dictionary Learning

2026-09-10T16:51:53Z

We present a novel approach to analyzing astronomical spectral survey data using our non-linear extension of an online dictionary learning algorithm. Current and upcoming surveys such as SPHEREx will use spectral data to build a 3D map of the universe by estimating the redshifts of millions of galaxies. Existing algorithms rely on hand-curated external templates and have limited performance due to model mismatch error. We address these limitations by developing a new algorithm that jointly estimates both the underlying spectral features in common across the entire dataset, as well as the redshift of each galaxy. To do this, we significantly extend an existing online dictionary learning algorithm, and apply this approach to redshift estimation for the first time. Our new approach scales well to large datasets since we only process a single spectrum in memory at a time. Our algorithm performs better than a state-of-the-art existing algorithm when analyzing a mock SPHEREx dataset, achieving a normalized median absolute deviation (NMAD) of 0.18% and a catastrophic error rate of 0.40% when analyzing noiseless data. Our algorithm also performs well over a wide range of signal to noise ratios (S/N), delivering sub-percent NMAD and catastrophic error above median S/N of 20. We released our algorithm publicly and it is available on github.

Bayesian Superiority in On/Off analysis

2026-09-10T15:13:07Z

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

The Balloon-borne VLBI Experiment (BVEX) Radio Telescope and Position Tracking System

2026-09-10T15:09:01Z

Very Long Baseline Interferometry (VLBI) is a technique in radio astronomy that vastly increases the diffraction limited angular resolution of radio observations by correlating simultaneous observations of radio telescopes separated by thousands of kilometers. Ground-based high-frequency VLBI is limited in baseline length by the diameter of the Earth and in sensitivity by molecular absorption of the Earth's atmosphere. One of the ways to improve VLBI is with balloon telescopes, which are much cheaper than space VLBI telescopes. In addition balloon-VLBI stations could also improve image quality due to increased uv-coverage. As a first step to achieving VLBI from a balloon-borne platform we present the Balloon-borne VLBI Experiment (BVEX). This is a novel, first-generation balloon-borne VLBI station observing at K-band (22 GHz) which launched as part of the Canadian Space Agency (CSA) STRATOS campaign from Timmins, Ontario, Canada in August 2025, with the aim to demonstrate VLBI from a balloon-borne platform by correlating with a large ground based telescope. We discuss the design of the 36 inch (91 cm) radio telescope and receiver with a 2 GHz bandwidth built from commercial-off-the-shelf (COTS) components as well as the telescope pointing system capable of interfacing with the CSA's CARMENCITA gondola. We also present a novel high precision position tracking system built from COTS components giving <1 mm precision on 1 s time scales which is required for achieving phase tracking at 22 GHz. We further show on-the-ground testing results from the 2025 Timmins campaign. The 2025 flight from Timmins was not successful due to a leak in the balloon preventing the payload from reaching its target altitude where accurate gondola pointing is possible. We therefore wrap up by presenting plans to upgrade the telescope for a potential next flight opportunity from Palmas, Tocantins, Brazil in 2027.

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

2026-09-10T14:26:39Z

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

The MICADO first light imager for the ELT: the PSF Reconstruction Software

2026-09-10T14:21:23Z

The MICADO instrument for the ESO ELT will provide Adaptive Optics (AO) diffraction-limited NIR imaging and spectroscopy. A critical component of MICADO is the Point Spread Function Reconstruction (PSF-R) Software, which is designed to perform a blind reconstruction of the PSF for all observations using AO telemetry data only, both with the Single Conjugate (SCAO) and Multi-Conjugate Adaptive Optics (MCAO) modes of MICADO. The SCAO PSF-R Pipeline is currently being completed, and validation with ERIS at VLT and SOUL+LUCI at LBT has demonstrated high accuracy, of percent-level on-axis and 5-20% off-axis. Initial scientific simulations confirm that the PSF-R software meets the necessary precision for high-quality analysis, securing its role for MICADO's first light and future ELT operations.

Towards First Light for MICADO: Validation of the PSF-R service with real data

2026-09-10T14:21:23Z

MICADO, one of the ELT first-light instruments, will rely on point-spread-function reconstruction (PSF-R) to meet scientific requirements, especially for SCAO observations of targets that lack bright reference stars nearby. PSF-R will be performed in post-processing using only AO telemetry, recorded simultaneously with the science data. For SCAO observations, both on- and off-axis PSFs will be delivered. We present the current status and results from an ESO TTR campaign begun in 2023, targeting a sparse three-star asterism under varying conditions with the ERIS instrument at VLT. Reconstructed PSFs reach ~10% accuracy in Strehl ratio and FWHM at separations up to half the size of the isoplanatic patch. The current results suggest the telemetry-driven approach can reproduce not only the core PSF structure but also the extended wings, which are essential for reliable photometry and morphological analysis of bright extended sources. The obtained results also corroborate the key role of wind as a limiting factor of the method, reducing the amount of recovered information on specific directions.

Systematic Biases in Gravitational-Wave Parameter Estimation from Neglecting Orbital Eccentricity in Space-Based Detectors

2026-09-10T09:53:01Z

Accurate modeling of gravitational-wave signals is essential for reliable inference of compact-binary source parameters, particularly for future space-based detectors operating in the milli- and deci-Hertz bands. In this work, we systematically investigate the parameter-estimation biases induced by neglecting orbital eccentricity when analyzing eccentric compact-binary coalescences with quasicircular waveform templates. Focusing on the deci-Hertz detector B-DECIGO and the milli-Hertz detector LISA, we model eccentric inspiral signals using a frequency-domain waveform that incorporates eccentricity-induced higher harmonics and the time-dependent response of spaceborne detectors. We quantify systematic biases in the chirp mass, symmetric mass ratio, and luminosity distance using both Bayesian inference and the Fisher-Cutler-Vallisneri (FCV) formalism, and assess their significance relative to statistical uncertainties. By constructing mock gravitational-wave catalogs spanning stellar-mass and massive black-hole binaries, we identify critical initial eccentricities at which systematic errors become comparable to statistical errors. We find that, for B-DECIGO, adopting a one-year observation period with f_min$ = 0.1$ Hz, even very small eccentricities, $e_0 \sim 10^{-4}-10^{-3}$ at 0.1 Hz, can lead to significant biases, whereas for LISA, adopting a five-year observation period with f_min$ = 10^{-4}$ Hz, such effects typically arise at larger eccentricities, $e_0 \sim 10^{-2}-10^{-1}$ at $10^{-4}$ Hz, due to the smaller number of in-band cycles. Comparisons between FCV predictions and full Bayesian analyses show good agreement over most of the initial eccentricity range, but diverge at high eccentricity, where Bayesian inference is required. Our results highlight the necessity of incorporating eccentricity in waveform models for future space-based gravitational-wave observations.

Precision spectral estimation at sub-Hz frequencies: Closed-form posteriors and Bayesian noise projection

2026-09-10T07:48:13Z

We consider the problem of estimating cross-spectral quantities in the low-frequency regime, where long observation times limit averaging over large ensembles of periodograms, thereby preventing the use of approximate Gaussian statistics. This case is relevant for precision low-frequency gravitational experiments such as LISA and LISA Pathfinder. We present a Bayesian method for estimating spectral quantities in multivariate Gaussian time series. The approach, based on periodograms and Wishart statistics, yields closed-form expressions at any given frequency for the marginal posterior distributions of the individual power spectral densities, the pairwise coherence, and the multiple coherence, as well as for the joint posterior distribution of the full cross-spectral density matrix. In the context of noise projection -- where one series is modeled as a linear combination of filtered versions of the others, plus a background component -- the method also provides closed-form posteriors for both the susceptibilities, i.e., the filter transfer functions, and the power spectral density of the background. We apply the method to data from the LISA Pathfinder mission, showing effective decorrelation of temperature-induced acceleration noise and reliable estimation of its coupling coefficient.

SMART : Spherical Mass ApeRture Toolkit

2026-09-10T07:44:00Z

The aperture mass filter is a widely used tool in weak lensing studies. While previous surveys have typically relied on the flat-sky approximation, forthcoming Stage IV surveys such as Euclid will cover sufficiently large areas to require the construction of curved-sky aperture mass maps. In this paper, we extend the shear-based aperture mass formalism to the sphere and introduce a software package for a fast and precise computation of spherical aperture mass maps from the shear field, defined directly on the celestial sphere. Unlike existing approaches, our method does not rely on planar projections and does not require the reconstruction of convergence maps. The software provides four different implementations, all of which are independent of the choice of aperture mass filter function. Starting from the brute-force approach, whose computational cost renders it impractical for future surveys covering more than 10,000 deg2, we investigate alternative galaxy-grouping strategies to improve computational efficiency. We demonstrate speed-up factors of up to 40 at a resolution of NSIDE = 4096 while achieving significantly higher precision than existing state-of-the-art methods. In particular, we show that the spherical shear-based implementations using a pixel-based approach outperforms the existing methods in terms of both precision and computational time. Finally, we show that, for weak-lensing cluster detection, the cluster sample produced using the spherical shear-based aperture mass method consistently outperforms those obtained using projected shear-based approaches in the purity-completeness plane, while simplifying the resulting selection function. Our spherical mass aperture software, called SMART, is made available on GitHub.

The EDD Radio Astronomy Backend Framework

2026-09-10T07:24:46Z

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

Project Setu: 3D Multi-Physics Design and Scaled Structural Analysis for a Relativistic Lightsail Architecture

2026-09-10T06:02:02Z

Deep-space exploration beyond the solar system requires eliminating chemical propellant mass penalties to achieve relativistic flight velocities (0.166c at 180 s, reaching the mission target of 0.20c at 227 s). This study presents a 3D multi-physics numerical framework for a 4.0-meter circular lightsail propelled by a 100 GW ground laser array, coupling 3D Maxwell FDTD wave optics, non-linear membrane mechanics, and Stefan-Boltzmann thermal radiation in ANSYS Mechanical APDL and Ansys Lumerical. A four-level grid convergence study establishes numerical independence with an ASME GCI_21 of 0.13%, resolving peak membrane stresses of 530.88 MPa with a 3.77x safety factor against stoichiometric Si3N4 tensile failure. With optical absorption constrained to 10 ppm (A = 1.0 x 10^-5), the steady-state core temperature stabilizes at 923.02 K (0.44% deviation from radiation theory), maintaining a +1,247 K margin below sublimation, while fundamental drumhead modal resonance (7.92 Hz) provides a 7.92x safety buffer against laser jitter. The electrodynamic radiation pressure formulation is cross-verified against published flight telemetry from JAXA IKAROS and NASA LightSail 2 within 0.12% and 2.13%, confirming classical momentum transfer modeling across solar and beamed propulsion regimes.

Science operation, data handling, and ground support system of the SOLAR-C mission

2026-09-10T02:18:04Z

SOLAR-C is an international solar-observing satellite mission led by Japan Aerospace Exploration Agency (JAXA). It aims to elucidate mass and energy transport in solar atmospheres through extreme ultraviolet (EUV) spectroscopy. The mission carries the EUV High-throughput Spectroscopic Telescope (EUVST) and the Solar Spectral Irradiance Monitor (SoSpIM), enabling comprehensive observations across a wide temperature range (10^4 K to 10^7 K) with minimum temperature gaps and high spatial and temporal resolution. To achieve its science objectives regarding atmospheric heating and solar flare eruptions, SOLAR-C implements a flexible and responsive operational procedure and a data processing system, while building on the heritage of the Hinode and IRIS satellites. The Chief Observer creates observation timelines that include core observation plans and approved proposed plans while taking into account the solar activity levels. A SpaceWire communication architecture is employed onboard the spacecraft, and a method is implemented in which the mission instrument temporarily acts as the network master during data transfer to support the high data rate requirements. Telemetry is downlinked at ground stations worldwide and gathered at the Institute of Space and Astronautical Science, JAXA. The EUVST data are calibrated at the SOLAR-C Science Center at Nagoya University, while the SoSpIM data are calibrated at the Processing and Archiving Facility before being integrated into the science data products. The data will be made publicly available immediately. The integrated operational scheme for this mission is expected to advance our understanding of solar atmospheric heating and flare processes.