Interstellar Dust Transport Through the Heliosphere Including the Sector Region

2026-03-18T14:08:05Z

Interstellar dust has been detected in situ flowing through the heliosphere. Understanding the implications of this dust for the nature of interstellar dust in the very local interstellar medium requires modeling the transport of the grains as they interact with the solar wind magnetic field. The magnetic field in the sector region (SR) that contains the heliospheric current sheet is substantially different from that in the monopolar solar wind. The rapid polarity flips that occur in the SR can present an effectively very low averaged field strength to grains that have gyroradii of tens of au. We present new calculations of dust transport through the heliosphere using a model that includes the SR. We show that the SR can act as a window allowing even relatively small grains to penetrate deep into the heliosphere. The presence of the SR reduces the variation in dust density with the solar cycle (as compared to models without it), with very little concentration or dilution of the dust for grains larger than $\sim 0.1$ $μ$m for most of the solar cycle (except for a focusing overall polarity of the field at solar minimum.) While the lack of time dependence of the magnetic field during transport of grains through the heliosphere is a limitation of the model, the relative lack of variation as a function of the point in the solar cycle of the grain density in the inner heliosphere suggests that our results will not deviate dramatically from a model that fully incorporates time dependence.

Alpha effect and dynamo in density-stratified turbulence with large-scale shear: applications to protoplanetary discs and astrophysical clouds

2026-03-18T14:08:02Z

A joint effect of the density-stratified turbulence (or inhomogeneous turbulence) and a large-scale shear for arbitrary Mach numbers results in the $α$ effect and mean-field dynamo action. These effects also produce the effective pumping velocity of a large-scale magnetic field. Compressibility of the turbulent velocity field (i.e., finite Mach number effects) does not affect the contributions to the $α$ tensor caused by the joint effect of inhomogeneity of turbulence and a large-scale shear. The isotropic part of the $α$ tensor is independent of the exponent of the turbulent kinetic energy spectrum. There is also an additional contribution to the effective pumping velocity of the mean magnetic field that is proportional to the product of the fluid density gradient and the divergence of the mean fluid velocity caused, e.g., by collapsing (or expanding) astrophysical clouds. Applications of these effects to protoplanetary discs, proto-galactic and proto-stellar clouds are discussed.

Reproducing Abell 2744 with the HyperMillennium Simulation

2026-03-18T13:52:12Z

We present the Hyper Millennium (HM) simulation, an extremely large cosmological simulation designed to support next-generation galaxy surveys. The simulation follows 4.2 trillion dark matter particles in a comoving box of $2.5\ h^{-1}{\rm Gpc}$, with a mass resolution of $3.2 \times 10^8\, {h^{-1}\rm M_{\odot}}$ and a force resolution of $3.0\ h^{-1}{\rm kpc}$. Its combination of scale and resolution is ideal for studying large-scale structures and rare cosmic objects. In this first paper of the HM project, we explore whether the massive galaxy cluster Abell~2744 (A2744) can be reproduced in detail in the simulation. Pixel-based statistics of galaxy number density $N_{\rm gal}$, luminosity density $L_{\rm gal}$, and projected mass density $κ$ show excellent agreement between A2744 and its analogues down to $\sim 50$ kpc, once field-selection biases toward high galaxy surface density are accounted for. This concordance, achieved in one of the most extreme known galaxy environments, is a validation of the underlying $Λ{\rm CDM}$ model in the extreme regime of A2744. It also showcases the robustness and accuracy of the HM simulation, which, when coupled with a sophisticated semi-analytic galaxy formation model, is capable of producing galaxy and mass catalogues of comparable quality out to high redshift across its full comoving volume of 50.4 ${\rm Gpc^3}$.

The SEEDZ Simulations: Methodology and First Results on Massive Black Hole Seeding and Early Galaxy Growth

2026-03-18T13:35:44Z

Here we introduce the SEEDZ simulations, a suite of cosmological hydrodynamic simulations exploring the formation and growth of the first massive black holes in the Universe. SEEDZ includes models for Population III star formation, supernovae explosions and the resulting formation of light seed black holes, metal enrichment and subsequent Population II star formation, heavy seed black hole formation, Eddington and super-Eddington accretion schemes as well as black hole feedback. In this paper, we cover the overall methodologies employed and present our current results at $z=15$. Our main result so far is that black holes initially grow faster than their host galaxy, and hence over-massive black holes are a feature of the high-redshift Universe. The fundamental black hole-galaxy relationships we observe at $z = 0$ (especially the M$_{\rm BH}$ - M$_*$ relationship) likely only emerge in more mature galaxies. At high-redshift, that relationship has not yet been established. We find that even at these high redshifts, MBHs can grow from their initial heavy seed mass of $\sim$10$^4$ M$_\odot$ up to 10$^6$ M$_\odot$. At the high end of our MBH masses, our simulated galaxy M$_{\rm BH}$ - M$_*$ relations match the observed high redshift trends i.e. over-massive BHs with M$_{\rm BH}$/M$_{\rm star} \sim 10^{-2}$. This initial set of simulations will continue to run down to $z=10$, where we will perform a comprehensive comparison of simulated MBH number densities and M$_{\rm BH}$ - M$_*$ relations with JWST observations. Further simulations with higher resolution will then follow.

A 3D physico-chemical model of a pre-stellar core. II. Dynamic chemical evolution in a pre-stellar core model using tracer particles

2026-03-18T13:13:35Z

This work explores the differences between static and dynamically evolving physico-chemical models of pre-stellar cores. A 3D MHD model of a pre-stellar core embedded in a dynamic star-forming cloud is post-processed using sequentially dust radiative transfer, a gas-grain chemical model, and a non-LTE line-radiative transfer model. The chemical evolution is modeled along $\sim$20,000 tracer particle trajectories to capture the impact of a realistic dynamical evolution as the core is formed. The emission morphology of CH$_3$OH and $c$-C$_3$H$_2$ and the intensities of CH$_3$OH, $c$-C$_3$H$_2$, CS, SO, HCN, HCO$^+$ and N$_2$H$^+$ are compared with observations of L1544. Our results show a distinct difference in chemical morphology between the dynamical and static models. The dynamical model reproduces the observed spatial distribution of CH$_3$OH and $c$-C$_3$H$_2$ toward L1544, whereas the static model fails to reproduce this morphology. In contrast, when comparing modeled and observed intensities across a broad range of molecules, the static model shows good agreement with observations for L1544. The dynamical model systematically predicts lower abundances and modeled intensities for six of the seven species presented here. For sulphur-bearing species, the intensities are in better agreement with observations when the initial abundances are undepleted in heavier elements. This study reveals distinct differences between dynamical and static physico-chemical models. The static model predicts higher abundances and intensities for the majority of the molecules studied here, compared with the dynamical model. This discrepancy may stem from the specific choices of initial conditions, which could limit the dynamical models ability to fully capture the physical and chemical history. The intensities predicted by the static model are comparable to those observed toward L1544.

Ripples in the baryon to dark matter ratio in $Λ$CDM: implications for galaxy formation

2026-03-18T12:48:13Z

We use the FLAMINGO galaxy formation model to quantify the impact of baryon-CDM isocurvature perturbations on galaxy formation in $Λ$CDM. In linear theory, these perturbations represent local, compensated variations in the ratio between the baryon and CDM densities; they freeze in amplitude at late times, with an RMS amplitude of $1.5\%$ on the Lagrangian scale of a $10^{11}\,\rm M_\odot$ halo ($0.85\, \rm{Mpc}$). Although such perturbations arise naturally within $Λ$CDM, most cosmological simulations and semi-analytic models to date omit them. These perturbations are strongly anti-correlated with the matter overdensity field such that halos form with baryon fractions below the cosmic mean, with earlier-collapsing halos exhibiting stronger baryonic suppression. To isolate the galaxy response, we analyse three hydrodynamical simulations with identical initial matter overdensity fields that: i) include isocurvature modes, ii) omit them, or iii) invert their amplitude. At $z=8$, isocurvature perturbations reduce the mean baryon fraction and star formation rates of resolved halos by $ 5\%$ and $ 12\%$, respectively, relative to the null-isocurvature case. These effects are almost independent of halo mass and diminish steadily with time, reaching $ 0.1\%$ and $ 1\%$ by $z=0$. We develop a model based on spherical collapse that accurately reproduces the mean baryon fraction suppression. As high-redshift observations become increasingly routine, incorporating isocurvature perturbations into simulations and semi-analytic models will be important for robust predictions of early galaxy and black hole formation in the JWST era.

The Engine and its Flows: Little Red Dot spectra are shaped by the column densities of their gas envelopes

2026-03-18T12:33:38Z

JWST data have enabled the abundant identification of compact broad Balmer line sources nicknamed the Little Red Dots. While they share broad lines with active galactic nuclei, they are unusually X-ray and infrared weak. We investigate the origin of the Balmer line profiles based on an empirical analysis of 18 broad H$α$-selected sources with high quality spectra at $z\approx3-7$. The H$α$ line profiles vary systematically with Balmer break strength: sources with blue UV to optical colors show a narrow core profile, redder sources with Balmer breaks a blue shifted absorption (P Cygni shape), and the reddest sources display absorption-dominated cores. All H$α$ lines have symmetric exponential wings, which are more dominant and slightly broader in red sources. Balmer absorption is present in $\sim60$ % of the sample, with H$β$ showing relatively stronger absorption. Drawing upon empirical analogies with stellar phenomena, we interpret these trends as being due to radiative processes that depend on variations in the optical depth, ionisation state and column density of a clumpy, partially ionised envelope. We unveil a correlation between the absorber velocity and Balmer break strength, with the densest absorbers inflowing and bluer sources having faster outflows. This indicates viewing angle or evolutionary effects where optically thick gas is inflowing, as suggested in models of super-Eddington accretion, and the engine can more easily drive outflows in directions with lower column densities. This new understanding of Balmer line profiles as tracing gas properties rather than dynamical broadening helps resolve tensions associated with high inferred black hole masses from standard virial calibrations, and reveals the complex gas environment around the hot central engine.

RABBITS - III. Modelling relativistic accretion discs around spinning black holes in galaxy formation simulations

2026-03-18T11:19:24Z

In this third study of the 'Resolving supermAssive Black hole Binaries In galacTic hydrodynamical Simulations' (RABBITS) series we develop and implement a geometrically thin relativistic accretion disc model, which self-consistently evolves the mass and spin vector of black holes via analytically modelling the structure of steady-state accretion discs. The model employs a suite of relativistic, local solutions where pressure is dominated by either gas or radiation, while opacity is primarily governed by either electron scattering or free-free absorption. These local solutions are piece-wisely combined to form the global structure of the accretion disc based on each solution's range of validity. By explicitly modelling the structure of accretion discs, the model mitigates the stochasticity inherent in Bondi-type prescriptions, resulting in an approach where every episode of black hole mass accretion is derived from first principles. For the first time, our model enables galaxy formation simulations to place constraints on accretion disc sizes and structures. In addition, flux and temperature radial profiles can be directly extracted from the simulation, enabling the generation of spectral energy distributions. Consequently, by incorporating the thermal structure and spacetime geometry around spinning black holes, our model more accurately captures the energetic output of quasars, overcoming critical limitations of classical approaches. Along with this manuscript, we make public a C version of the model appropriate to be used as a module in simulations, a Python version of the model that can be used independently to post-process any simulation and build mock accretion discs, and an updated version of the Relagn model that has the capability of producing SEDs by building an accretion disc for a given set of parameters and extracting its surface density, temperature, and opacity profiles.

Stringent constraint on the CCC+TL cosmology with $H(z)$ Measurements

2026-03-18T11:06:19Z

Recently, the Covarying Coupling Constants and Tired Light (CCC+TL) hybrid model was proposed to explain the unexpectedly small angular diameters of high-redshift galaxies observed by the James Webb Space Telescope (JWST) that are challenging to reconcile with the $Λ$CDM model. In this work, we test the CCC+TL model against model-independent Hubble parameter [$H(z)$] measurements obtained from cosmic chronometers. It turns out that the parameter set optimized for the type-Ia supernova (SN Ia) dataset within the CCC+TL model fails to reproduce the $H(z)$ data, but the $Λ$CDM model works well. Statistical comparison using the $Δχ^2$ strongly favors $Λ$CDM over CCC+TL for the $H(z)$ data, with $Δχ^2 = 61.52$. Crucially, the CCC+TL framework exhibits a severe internal tension, where the SN Ia-optimized speed-of-light variation index $α$ is rejected by the $H(z)$ dataset with a likelihood ratio of $\it{R} \approx 1.7 \times 10^{-14}$. Our result suggests that the tension posed by JWST observations of compact high-$z$ galaxies may originate from the intrinsic properties and evolution of galaxies in the early universe.

The DORCHA suite: nature, nurture, and the phase space distribution of the Milky Way's high redshift progenitors today

2026-03-18T10:18:41Z

Where in the present-day Milky Way should we search for the remnants of its earliest stars? We address this question using the DORCHA (Gaelic for Dark; DUR-uh-khuh) suite: a set of 25 high-resolution, dark-matter-only cosmological zoom-in simulations of Milky Way analogue (MWA) haloes evolved to $z=0$. Of these, 15 are isolated and the rest are in pairs, similar to the MW and M31. By identifying and tagging the most bound material in high-redshift ($z\geq5$) progenitor haloes -- those likely to host early star formation -- we track the present-day phase-space distribution of this ancient component. We find that this material is highly centrally concentrated at $z=0$, with 90 -- 100 per cent residing within $r \lesssim 15\,h^{-1}\,\mathrm{kpc}$. It exhibits steep density profiles ($ρ\propto\,r^{-4}$), low velocity dispersions ($σ_r / σ_{\rm max} \lesssim 0.6$), and radially biased orbits ($β\gtrsim 0.5$ for $r \gtrsim 0.1\,R_{200}$), consistent with a relaxed, centrally embedded population. These results hold across haloes with diverse formation histories and environments, suggesting that the dynamical signature of early progenitors is robust to later mergers and interactions. Our findings imply that the fossil record of the first generations of stars -- including Population III and extremely metal-poor stars -- should be sought in the innermost regions of the Milky Way, where they retain distinctive kinematic imprints. While these stellar populations may overlap, we caution that low metallicity does not uniquely identify ancient stars, nor vice versa. The DORCHA suite thus provides a physically motivated baseline for interpreting observations from Galactic Archaeology surveys targeting the bulge and inner halo.

Astrophysical Black holes: An Explanation for the Galaxy Quenching

2026-03-18T10:10:58Z

In light of increasing observational evidence supporting the existence of ultra-compact objects, we adopt the term astrophysical black hole to refer to any object having a huge mass confined within a sufficiently small region of spacetime. This terminology encompasses both the classical black hole solutions predicted by general relativity, as well as alternative compact objects that may not possess an event horizon. We propose models of Astrophysical Black holes (ABHs) without event horizons (EHs), as a more viable explanation for the long-term quenching phenomenon in galaxies. At the same time, the short-term quenching is explained here in terms of an efficient feedback expected in the models of stellar-mass astrophysical black holes (StMABHs). We have calculated the radiative flux from the disk in a general spherically symmetric metric background and used it to contrast the distinctive features of the BHs and ABHs scenarios. We demonstrate the relative ease of wind generation from the accretion disk surrounding an ABH without an event horizon, compared to a BH, and highlight the significant strength of these winds. The nature of the feedbacks arising from accretion onto a BH and an ABH in the `quasar' and `radio' modes are compared and some possible observational signatures of the StMABHs are pointed out.

Why Are Some Optically Red Spirals NUV-r Blue?

2026-03-18T09:57:39Z

To understand the complicated formation processes of disk galaxies, we carry out a comparative study for NUV-r blue and red spiral galaxies drawn from a parent sample of u-r red spirals with $M_{*} > 10^{10.5} M_{\odot}$ at 0.02 < z < 0.07, based on the optical data from the Sloan Digital Sky Survey (SDSS) and the ultraviolet (UV) data from the Galaxy Evolution Explorer (GALEX). The analyses of the images and surface brightness profiles in the NUV and optical bands show that the differences between NUV-r blue and red spirals mainly occur in the outer disks (1-3 $R_{\rm e}$), and the contrast in NUV band is much larger than that in the optical bands. Both the positions on the star formation main sequence diagram and the NUV-r color profiles suggest that NUV-r red spirals have been fully quenched, whereas NUV-r blue spirals host quenched bulges and inner disks, as well as star-forming outer disks. Particularly, the disk mass-size relations indicate that, at a given disk mass, NUV-r blue spirals possess larger optical disks than NUV-r red spirals, by a factor of $\sim 1.20$. The environments and optical morphologies are consistent with the scenario that NUV-r blue spirals obtained fresh fuel for star formation either by interacting or merging with gas-rich galaxies or through accreting surrounding HI gas.

EGS-z11-R0: a red, dust-rich galaxy at Cosmic Dawn

2026-03-18T09:26:06Z

Context. Galaxies discovered by JWST at z > 10 are predominantly characterized by extremely blue rest-frame UV slopes. Conversely, the existence of dust-reddened systems at such early epochs has remained largely unconfirmed spectroscopically. Aims. We present the spectroscopic confirmation of EGS-z11-R0 at z = 11.45, the most distant red galaxy identified to date, discovered serendipitously through inspection of publicly available JWST/NIRSpec data. Methods. We analyze JWST/NIRSpec PRISM and G395M spectroscopy together with multiwavelength HST, NIRCam, and MIRI photometry. We identify significant detections of the C IV 1548,1551 and C III] 1908 transitions, yielding a redshift of zspec = 11.452 +/- 0.021. We measure rest-frame UV emission-line fluxes and equivalent widths and use these diagnostics to constrain the nature of the ionizing radiation field. Finally, we perform spectral energy distribution modeling with CIGALE, combining spectroscopy with photometry and including stellar, nebular, dust, and active galactic nuclei (AGN) components. Results. EGS-z11-R0 exhibits a red UV continuum slope (betaUV approximately -1.0), placing it well above the canonical MUV-betaUV relation at z~10-12 and making it the highest-z spectroscopically confirmed member of the emerging "red monster" population. Emission-line diagnostics reveal a hard ionizing spectrum consistent with extreme star formation and compatible with a composite stellar plus AGN scenario. The best-fit SED solution favors a stellar mass of log(M*/Msun) ~ 9.2-9.6, a SFR of 10-40 Msun yr^-1, and substantial dust attenuation (AV~1.2 mag). Conclusions. The confirmation of EGS-z11-R0 establishes that chemically evolved, dust-enriched galaxies were already in place at z approximately 11.5. [abridged]

A novel algorithm for GPU-accelerated particle-mesh interactions implemented in the QUOKKA code

2026-03-18T07:19:55Z

We present a novel, GPU-optimized algorithm for particle-mesh interactions in grid-based hydrodynamics simulations, designed for massively parallel architectures. This approach overcomes the inefficiency of particle neighbour searches or sorts across multiple GPU nodes by using a new "particle-mesh-particle" interaction scheme, which extends the particle-mesh method for self-gravity. The algorithm proceeds in two main stages: first, quantities exchanged between particles and the mesh -- such as mass, energy, and momentum added by stellar feedback or removed by accretion onto a sink -- are deposited into a buffer mesh equipped with ghost zones, where multiple contributions per cell are accumulated using atomic additions and then communicated across distributed memory ranks. In the second stage, the buffer states are applied to real mesh states, incorporating cell-wise limiters to enforce physical constraints such as positive density. We implement this scheme in the GPU-native radiation-magnetohydrodynamics code QUOKKA and validate it through a comprehensive suite of tests, including Bondi and Bondi-Hoyle accretion, and single and multiple supernova remnant evolution at varying spatial resolutions. We show that the algorithm achieves $\approx 50\%$ weak-scaling efficiency running on up to 8192 GPUs on the Frontier supercomputer. This scheme enables efficient, scalable particle-mesh coupling for GPU-optimized simulations of star formation and feedback in galaxies.

EMU/GAMA: Refining Dust Extinction Corrections for Hα Luminosity Functions Using Radio-Based Calibration

2026-03-18T07:09:58Z

We present a novel approach to correcting H$α$ luminosity functions for dust extinction by calibrating against radio-based star formation rates (SFRs), using data from the Evolutionary Map of the Universe (EMU) and Galaxy and Mass Assembly (GAMA) surveys. Accurate dust correction is essential for deriving SFRs from rest-frame UV-optical emission lines, particularly as the \textit{James Webb Space Telescope} extends such measurements to galaxies at $z>5$. While a luminosity dependence of dust obscuration has long been recognised, our method exploits the empirical relationship between obscured (H$α$) and unobscured (radio) SFRs to provide a dust correction that can be applied where traditional spectroscopic techniques, e.g. Balmer line based approaches, are unavailable. We apply the SFR based dust correction to 25 published H$α$ luminosity functions spanning $0