The effect of spectral resolution on biosignature detection via reflected light observations of the Earth through time

2026-04-29T17:39:38Z

NASA's Habitable Worlds Observatory (HWO) will search for biosignatures on Earth-like exoplanets using reflected light spectroscopy. A critical instrument design parameter is resolving power, which must balance biosignature detectability against exposure time and detector noise constraints. We assess the resolving power needed to detect and characterize key biosignature gases and habitability indicators including O$_2$, O$_3$, H$_2$O, CH$_4$, CO$_2$ and CO across atmospheres representing the Archean, Proterozoic, and Phanerozoic Earth. We combine analytical detectability calculations spanning spectral resolutions ($λ/Δλ$) $R=20$-$5000$ with atmospheric retrievals using the rfast radiative transfer model and pyEDITH exposure time calculator for realistic wavelength-dependent noise modeling. In the visible ($0.4$-$1.0$ $μ$m), the nominal resolution $R_{Vis}=140$ is sufficient for detecting O$_2$ in Phanerozoic-like atmospheres. Higher resolutions could theoretically reduce exposure times for low-O$_2$ Proterozoic atmospheres, but require $>10\times$ reductions in dark current and could increase H$_2$O detection exposure times by $\sim 2\times$, penalizing the foundational habitability constraint that anchors downstream biosignature searches. The most efficient path for low-O$_2$ atmospheres may instead be indirect inference via O$_3$, whose Hartley-Huggins bands are detectable at $R_{UV}\sim 7$. In the near-IR ($1.0$-$1.7$ $μ$m), $R_{NIR}\geq40$ is necessary to avoid a degeneracy between CO$_2$ and CO that could produce false positive detections of abundant CO. The nominal $R_{NIR}=70$ is sufficient for characterizing all Earth-through-time cases. These results support HWO's current baseline resolution choices and provide actionable guidance for finalizing spectrometer requirements while maintaining technological feasibility for the search for life on exoplanets.

The tale of the 3 planets: 3D cloud feedback enhances the spectral diversity of warm Jupiters

2026-04-29T17:21:49Z

JWST has shown a large diversity in warm Jupiter spectra, despite only small variations in the planetary parameters. However, the main driver of this diversity remains unclear. We aim to identify the mechanisms responsible for the spectral difference of three warm Jupiter-size exoplanets observed by JWST: whereas WASP-80b appears mostly cloud-free, both WASP-107b and WASP-69b have spectra dominated by clouds. We model each planet using the same framework, ADAM (formerly SPARC/MITgcm), which solves for the interactions among cloud transport, radiative transfer, and atmospheric circulation in 3D. We investigate the role of three condensate species, Na$_2$S, KCl, and MgSiO$_3$, and four particle sizes (0.1, 1, 5, and 10 $μ$m). Clouds settle deeper in the atmosphere of the higher-gravity planet WASP-80b than in WASP-107b, reproducing their spectral difference naturally. For WASP-107b, three clouds can reproduce the NIRCam observations: 5 $μ$m Na$_2$S, 1 $μ$m KCl, and 5 $μ$m MgSiO$_3$ models. However, these cannot match the scattering slope observed at shorter wavelengths in NIRISS and the possible silicate feature in the MIRI bandpass, suggesting a multi-modal distribution of clouds. Our model predicts that small silicate particles should be homogeneously distributed and thus cannot account for the difference between the two limb spectra in the MIRI bandpass. Finally, applying the same model to WASP-69b does not yield a partially cloudy dayside solution that fits the emission spectra, as proposed in a previous study. Coupling among 3D circulation, clouds, and radiative transfer can enhance the spectral diversity of warm Jupiter exoplanets, particularly through changes in cloudiness with gravity. The combination of multi-phase, wide-wavelength coverage and models that couple clouds, circulation, and radiative transfer is key to advancing our understanding of these new objects.

The Influence of the Fractal Dimension on Dust Evolution in Protoplanetary Disks

2026-04-29T15:25:44Z

Context: During the first stages of dust coagulation in protoplanetary disks, the dust aggregates are expected to have a high degree of porosity. Most models of dust growth, however, do not take this into account. The reason for this is the technical complexity of this problem. Furthermore, the coagulation/fragmentation kernel for colliding porous or fractal dust aggregates is not well understood. Aims: We wish to explore the effect of aggregate porosity on the evolution of the dust population in protoplanetary disks, with an emphasis on the fragmentation and the bouncing barrier. Methods: We use the DustPy code, and implement porosity as a prescribed function of particle mass with the fractal dimension as a free parameter. In this way, we parameterize the ill-constrained physics of colliding porous/fractal aggregates, and we can explore the effect of different porosity prescriptions. We take into account the effect of porosity on the dust dynamics, while neglecting its effect on the collision outcomes. Results: We find that larger particle masses are reached for lower fractal dimensions. The maximum Stokes numbers that are reached do not depend on the fractal dimension in the case of fragmentation-limited growth and decrease with decreasing fractal dimension in the case of bouncing-limited growth. Furthermore, particle growth is slower for smaller fractal dimensions in our models. Conclusions: The dust evolution is strongly influenced by the fractal dimension. Although larger masses are reached for smaller fractal dimensions, the particles are still much smaller than planetesimals. Under the assumption that the bouncing/fragmentation velocity does not depend on the fractal dimension or filling factor, fractal growth is not beneficial for the streaming instability to occur in the case of fragmentation-limited growth and even disadvantageous in the case of bouncing-limited growth.

SPHEREx Ultracool Dwarf spectral Atlas (SUDA): Atmospheric and Fundamental Parameters of Ultracool Dwarfs

2026-04-29T15:03:15Z

We present the SPHEREx Ultracool Dwarf spectral Atlas (SUDA), a homogeneous sample of 1675 ultracool dwarfs with continuous 0.75--5 $μ$m spectroscopy from SPHEREx QR2. Using the SAND and ATMO2020++ atmospheric model grids, we derive atmospheric parameters and calculate bolometric luminosities ($L_{\rm bol}$). We combine the inferred $T_{\mathrm{eff}}$ and radii with evolutionary tracks to estimate masses and ages for the full sample. Evolutionary surface gravities ($\log g$) are also reported for sources with parallaxes. In the 1700--2500~K range, the atmospheric $\log g$ from spectral fitting are systematically lower than the evolutionary $\log g$, with a median offset of about 1.1~dex, likely reflecting residual degeneracy between $\log g$ and metallicity in low resolution SPHEREx spectra. We also construct an empirical spectral atlas by grouping the spectra in the adopted parameter space, using the $T_{\mathrm{eff}}$ and the evolutionary $\log g$. The resulting atlas contains 52 parameter bins and spans $T_{\mathrm{eff}}\simeq 700$--$3000$~K. Molecular indices reveal a coherent atmospheric sequence across the sample. H$_2$O and CH$_4$ strengthen toward lower $T_{\mathrm{eff}}$, whereas CO and CO$_2$ rise below $\sim$1500~K and turn over near $\sim$1000~K. Comparison with model sequences shows that the CO$_2$ index is a useful empirical metallicity tracer at $T_{\mathrm{eff}}\sim 800$--1300~K. Together, these results establish SUDA as a reference sample for linking observed 0.75--5~$μ$m spectral morphology to atmospheric and evolutionary trends in ultracool dwarfs.

Shape and spin axis determination of the Tianwen-2 target asteroid (469219) Kamo'oalewa from lightcurve inversion

2026-04-29T14:34:50Z

Near-Earth asteroid (469219) Kamo'oalewa is an Earth quasi-satellite, temporarily trapped in a 1:1 orbital resonance with our planet. Despite its dynamical relevance and the hypothesis that it may be a lunar ejecta fragment, its physical properties are still poorly constrained. In particular, no reliable models of its shape and spin state have been published so far. The scientific interest in this object is further enhanced by its selection as the primary target of the Chinese Tianwen-2 mission, which aims to rendezvous with this asteroid and return samples of it to Earth. The aim of this work is to determine the shape and spin axis orientation of Kamo'oalewa by means of photometric telescope observations and lightcurve inversion. We analyzed lightcurves obtained during several apparitions using the well-established algorithm, based on convex shape modeling. We derived a convex shape model and estimated the spin pole orientation. In the preferred solution, the pole is located at ecliptic coordinates λ, β = (126,-16) degrees, with a sidereal rotation period of P~0.465 h. Conclusions. Our results provide the first direct constraints on the rotational state and morphology of Kamo'oalewa, information of key importance in preparation for the upcoming Tianwen-2 sample-return mission.

Comet-type periodic motions and their out-of-plane bifurcations in the Earth-Moon CR3BP: a computational symplectic analysis

2026-04-29T09:34:03Z

Comet-type periodic orbits of the circular restricted three-body problem (CR3BP) are periodic solutions that are generated from very large retrograde and direct circular Keplerian motions around the common center of mass of the primaries. In this paper we first provide an analytical proof of the existence of the comet-type periodic orbits by using the classical Poincaré continuation method. Within this analytical approach, we also determine the Conley-Zehnder index, defined as a Maslov index using a crossing form. Then, by applying a standard corrector-predictor technique, we explore numerically the two families of comet orbits within the Earth-Moon CR3BP. We compute their stability indices, identify vertical self-resonant bifurcations of higher order periods (of multiplicity from integer multiples up to six), investigate the vertically bifurcated spatial periodic solutions, and discuss their orbital characteristics. We also describe the orbits that are in resonance with the Earth and the Moon. We illustrate our main results in the form of bifurcation graphs, based on symplectic invariants, that provide a topological overview of the connections of the bifurcated branches, including bridge families.

RV and TTV Measurements of Two Transiting Long-Period Giants around TOI-4600

2026-04-29T08:36:54Z

TOI-4600b and c, originally identified by the Transiting Exoplanet Survey Satellite (TESS) and reported by I. Mireles et al. (2023), are a rare pair of transiting long-period giant planets ($\rm P_b=82.7$ days, $\rm P_c=482.8$ days) orbiting an early K dwarf. In this work, we refine the orbital parameters of the TOI-4600 system by combining new TESS photometry, ground-based transit follow-up, and radial velocity (RV) observations from MAROON-X. We obtain improved constraints on planetary masses and eccentricities, and update other parameters, such as the stellar age. For TOI-4600b, we measure a mass of $M_p = 74.7^{+4.7}_{-4.4}\,M_{\oplus}$ and an eccentricity of $e=0.153^{+0.020}_{-0.018}$, and $M_p = 212.53^{+13.26}_{-13.03}\,M_{\oplus}$ and $e=0.219^{+0.015}_{-0.018}$ for TOI-4600c. We find significant transit timing variations (TTV) in both planets, with semi-amplitudes of approximately $1$\,hr. We derive Transit Spectroscopy Metric values of 16.87 for TOI-4600b and 10.09 for TOI-4600c, indicating that both planets are promising JWST targets for studying the atmospheres of temperate and cold Jupiters, a relatively poorly characterized sample thus far. These updated parameters and TTV ephemerides are important for planning and interpreting future photometric, spectroscopic, and dynamical studies of the TOI-4600 system.

CPI-C: Cool Planet Imaging Coronagraph on Chinese Space Station Survey Telescope

2026-04-29T06:39:23Z

Cool Planet Imaging Coronagraph (CPI-C) on Chinese Space Station Survey Telescope (CSST) is proposed to direct image the cool planets around nearby solar-type stars (within 40 pc). The core scientific objective of CPI-C is to conduct high-contrast directly imaging surveys of exoplanets ranging in size from Neptune-like to Jupiter-like, located at separations of 0.5 to 5 AU from their host stars, and to perform systematic spectroscopic analysis of the detected planets through high-precision multi-band photometry. CPI-C employs a step-transmission apodization technique to suppress the diffraction noises from the telescope pupil and a precise phase correction technique to eliminate the speckle noises due to imperfections of the optical surfaces. The contrast requirement is better than $10^{-8}$ at an inner working angle (IWA) of $3-4λ/D$, in the visible wavelength from 600 nm to 900 nm. CPI-C will be the first space-based instrument capable of directly imaging the reflection light from the cool exoplanets in the visible wavelength enabling the measurement of key physical parameters such as the effective temperature, surface gravity, radius, mass, and other key parameters. The potential observation results will significantly contribute to further understand the formation and evolution mechanisms of planets, which will also lay a solid foundation for future confirmation of the Earth-twins in the next generation space flagship missions.

Approximating Periodic Orbits with Algebraic Curves and Related Minimal Problems

2026-04-29T06:32:31Z

The Circular Restricted Three-Body Problem (CR3BP) models the motion of a massless body under the gravitational influence of two primaries. We present a method for approximating a given family of periodic orbits by low-degree implicit algebraic curves, producing one-parameter families of algebraic orbit models. These models enable the construction of minimal problems motivated by liaison navigation, where spacecraft states are inferred from inter-spacecraft measurements. Relevant applications include initial orbit determination and spacecraft positioning. Each minimal problem defines a parameterized family of instances; for generic parameters, the number of solutions equals the degree of the associated branched covering map. We compute these degrees using both symbolic and numerical methods, and we outline a homotopy-continuation-based solver construction that can be practical for low-degree cases.

Prediction of Celestial Pole Offsets Based on Sliding Window and Bivariate Least Squares Fitting

2026-04-29T04:42:32Z

As an important component of Earth Orientation Parameters (EOP), the prediction of Celestial Pole Offsets (CPO) holds significant importance for missions such as deep space exploration. To explore a better CPO prediction algorithm that improves accuracy across different forecast spans, a CPO prediction algorithm is proposed based on a sliding window and bivariate least squares fitting. First, experiments determine an optimal sliding window of 900 days. Then, bivariate least squares fitting is performed on the selected 900-day historical data to complete extrapolation prediction. Then, bivariate least squares fitting is performed on the selected 900 day historical data to complete extrapolation prediction. Experimental results show that the proposed algorithm exhibits excellent accuracy. In comparisons with prediction results from participating teams in the Second Earth Orientation Parameters Prediction Comparison Campaign (2nd EOP PCC), the algorithm's Mean Absolute Error (MAE) is superior to both ID154 and ID155. Team ID154 achieved the best dX prediction, while Team ID155 achieved the best dY prediction. Furthermore, the algorithm performs well not only on the EOP 14 C04 series but also on the newly released EOP 20 C04 series after the 2nd EOP PCC. Its prediction results are far better than those in the daily files published by the International Earth Rotation and Reference Systems Service (IERS). In terms of dX forecast accuracy, the MAE for the 10th, 30th, and 57th days were reduced by 53%, 59%, and 60%, respectively. In terms of dY forecast accuracy, the MAE for the 10th, 30th, and 57th days were reduced by 35%, 38%, and 42%, respectively.

Polarimetric Tomography Applied to Synthetic Multi-Spacecraft White-Light Images: Observing Coronal Mass Ejections in 3D

2026-04-28T18:03:51Z

A discrete tomography method has been developed that is able to reconstruct three-dimensional coronal mass ejection (CME) density structure. We test the method by producing synthetic coronagraph imagery for three events using the CORona--HELiosphere (CORHEL) model. We combine images from different numbers of observing spacecraft and we perform the method separately using polarimetric and non-polarimetric reconstructions, as a means to test their relative effectiveness. We show that increasing the number of observing spacecraft consistently reduces the mean relative absolute error (MRAE) between the simulated and reconstructed density. Furthermore, the MRAE is generally lower when using polarimetric reconstructions compared to non-polarimetric reconstructions. Methods applied to localise the CME front work well for all spacecraft configurations, and are improved when using polarimetric, over non-polarimetric, reconstructions. The presence of a CME front can be identified with an accuracy of $(72\pm9)\%$, $(70\pm8)\%$ and $(52\pm12)\%$ for CME1, CME2 and CME3 via polarimetric reconstructions using only three spacecraft at L1, L4 and L5. The radial position of the CME front can be constrained to a high level of precision when using polarimetric reconstructions using the same three spacecraft; $0.003\pm0.004$\,au, $0.004\pm0.005$\,au and $0.005\pm0.004$\,au for CME1, CME2 and CME3, respectively. We expect that at least four spacecraft are required in order to derive accurate information about 3D CME structure. We find no strong evidence of improvement when including out-of-ecliptic observers, but that their inclusion increases the volume of space within which the inversion can be performed.

Measuring Apsidal Clustering

2026-04-28T18:00:00Z

The decade-long debate over the existence of apsidal clustering in the outer solar system is poised for reignition given the plethora of distant trans-Neptunian object (TNO) discoveries expected from the forthcoming Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST). Here, we present a new conditional-likelihood method to measure apsidal clustering that is insensitive to uneven survey footprints. We calculate the long-term orbital stability of distant TNOs, which allows us to expand the known sample of relevant objects from 21 to 25. We apply our new method to this up-to-date sample, showing that the significance of the apsidal clustering in the outer solar system has fallen from $2.7σ$ to $1.9σ$, and that the direction of clustering is not well constrained. This new method is suitable for application to the growing sample of known TNOs, and the results will reveal whether the evidence for a hypothetical Planet X from apsidal clustering is real or spurious.

Exploring the conditions for forming planetesimals by the streaming instability and planetary systems by pebble accretion

2026-04-28T16:25:46Z

The streaming instability and pebble accretion are two physical mechanisms with demonstrated potentials to drive, respectively, the formation of planetesimals and the growth of planetary systems containing a diverse range of planetary types. Here we explore the protoplanetary disc conditions in terms of turbulence strength, Stokes number and initial disc size that are needed to (i) form planetesimals by the streaming instability, (ii) form gas giant planets in cold orbits, (iii) form super-Earths and sub-Neptunes close to the star and (iv) form rocky planet embryos in temperate orbits. We identify an optimum Stokes number range between St= 0.01 and St= 0.03 where all three planetary classes form and where the streaming instability is triggered for a slightly elevated pebble metallicity. Cold gas giants require a turbulence strength of at most $δ=10^{-4}$ and furthermore need large initial disc sizes to benefit from a prolonged pebble flux; super-Earths and rocky planet embryos tolerate higher turbulence strengths similar to those measured for the vertical shear instability. A higher Stokes number of St=0.1 is detrimental to the formation of cold gas giants due to the short-lived pebble flux. For Stokes numbers below St= 0.003, extremely low values of turbulence ($δ<10^{-5}$) are required to form cold gas giants. We highlight how loss of gas to disc winds, reduction in the migration speed by thermal or dynamical torques or the presence of pressure bumps in the outer disc could increase the parameter space for the formation of cold gas giants. We derive analytically that the mass of the largest planetesimals formed by the streaming instability is of similar magnitude to the threshold mass beyond which pebble accretion becomes efficient, if planetesimals form in the earliest phases of protoplanetary disc evolution.

Equifinality of Venus-like CO$_2$ Atmospheres

2026-04-28T16:20:19Z

While Earth locks much of its carbon in its crust as carbonates, Venus retains a comparable carbon inventory almost entirely in its atmosphere as CO$_2$. On Earth, the geological carbon cycle that has produced this vast crustal carbonate inventory is regulated by biology, liquid water, and plate tectonics, which together have stabilised climate over geological timescales. Venus presently lacks all these processes. We test whether Venus's massive CO$_2$ atmosphere is diagnostic of a specific evolutionary pathway by quantifying three routes: primary magma-ocean outgassing, secondary volcanic degassing in a stagnant-lid regime, and remobilisation of crustal carbonates after climate destabilisation. Using a coupled climate--weathering framework, we find that a past habitable Venus could have stored $\sim$20 bar of CO$_2$ as crustal carbonates. Following transition to runaway conditions, crustal heating releases this reservoir over tens of Myr. In stagnant-lid secondary-degassing models with a MORB-like mantle, outgassing reaches only $\sim$25 bar CO$_2$, limited by progressive mantle volatile depletion. However, Venus-like inventories can be achieved through: (i) magmatic carbon enrichment, (ii) increased magmatic delivery to the surface (high extrusion or melt production), and (iii) the recycling of undegassed carbon back into the planet's interior. Primary magma-ocean outgassing can generate $>10^2$ bar CO$_2$, but the retained fraction after early escape remains uncertain. Ultimately, a Venus-like massive CO$_2$ atmosphere is an equifinal outcome and does not uniquely diagnose a temperate past.

SKYSURF-11: A New Zodiacal Light Model Optimized for Optical Wavelengths

2026-04-28T15:50:46Z

We present an improved zodiacal light model, optimized for optical wavelengths, using archival Hubble Space Telescope (HST) imaging from the SKYSURF program. The Kelsall et al. 1998 model used infrared imaging from the Diffuse Infrared Background Experiment (DIRBE) on board the Cosmic Background Explorer to create a 3D structure of the interplanetary dust cloud. However, this model cannot accurately represent zodiacal light emission outside of DIRBE's nominal wavelength bandpasses, the bluest of which is 1.25 micron. We present a revision to this model (called ZodiSURF) that incorporates analytical forms of both the scattering phase function and albedo as a function of wavelength, which are empirically determined across optical wavelengths (0.3-1.6 micron) from over 5,000 HST sky surface brightness (sky-SB) measurements. This refined model results in significantly improved predictions of zodiacal light emission at these wavelengths and for Sun angles greater than 80 deg. Fits to HST data show an uncertainty in the model of ~4.5%. Remarkably, the HST sky-SB measurements show an excess of residual diffuse light (HST Sky - ZodiSURF - Diffuse Galactic Light) of 0.013 +/- 0.006 MJy/sr. We suggest that a very dim spherical dust cloud may need to be included in the zodiacal light model, which we present here as a toy model.